Crystallization of High Performance Metallic Materials (2nd Edition)
Source abstract
Abstract
Crystallization generally refers to the material processing in which a solid phase nucleates within a liquid or solid matrix [...]
Only a short abstract or summary was supplied by the source.
Source: crossref · Quality: short
Research context
OpenAlex topics: Crystallization and Solubility Studies · Aluminum Alloy Microstructure Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), School of Metallurgy, Northeastern University, Shenyang 110819, China
Department of Materials Science and Engineering, KTH Royal Institute of Technology, Brinellvägen 23, SE-100 44 Stockholm, Sweden
References (55)
Show source-provided references
1. Mu, W., and Chen, C. (2025). Crystallization of High-Performance Metallic Materials. Crystals, 15.10.3390/books978-3-7258-3273-6 ↗
2. Assessing Consumers’ Behavioral Intention and Willingness to Pay for Electric Vehicles: An Evidence from China
3. Recent Progress on Non-oriented Silicon Steel10.1002/srin.200506040 ↗
4. Recent development of non-oriented electrical steel sheet for automobile electrical devices10.1016/j.jmmm.2008.03.054 ↗
5. Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture10.1016/j.actamat.2020.08.048 ↗
6. Enhanced {100} recrystallization texture in strip-cast nonoriented electrical steel by two-stage annealing10.1002/srin.202200633 ↗
7. Ultrastrong {100} texture in twin-roll strip cast non-oriented electrical steel through two-step annealing10.1016/j.scriptamat.2024.115998 ↗
8. Development of strong Goss texture in ultra-thin high silicon steel with excellent magnetic properties fabricated by two-stage rolling10.1007/s12613-024-2988-3 ↗
9. Shao, K., Niu, Y., Pei, Y., Qiao, J., Pan, H., and Wang, H. (2024). Effects of Continuous Rolling and Reversible Rolling on 2.4% Si Non-Oriented Silicon Steel. Crystals, 14.10.3390/cryst14090824 ↗
10. Guo, F., Niu, Y., Fu, B., Qiao, J., and Qiu, S. (2024). Influence Mechanisms of Cold Rolling Reduction Rate on Microstructure, Texture and Magnetic Properties of Non-Oriented Silicon Steel. Crystals, 14.10.3390/cryst14100853 ↗
11. Xue, L., Li, X., Wang, T., Zhao, Q., Wang, H., Wang, J., Lin, W., Niu, X., Mu, W., and Chen, C. (2025). Analysis of Inclusions in the Entire Smelting Process of High-Grade Rare Earth Non-Oriented Silicon Steel. Crystals, 15.10.3390/cryst15090779 ↗
12. Wang, H.J., Niu, Y., Ling, H.T., Qiao, J.L., Zhang, Y.L., Zhong, W., and Qiu, S.T. (2023). Effects of rare earth La–Ce alloying treatment on modification of inclusions and magnetic properties of W350 non-oriented silicon steel. Metals, 13.10.3390/met13030626 ↗
13. Wang, H.J., Niu, Y.H., Ling, H.T., Qiao, J.L., Zhang, Y.L., Zhong, W., and Qiu, S.T. (2023). Modification of rare earth Ce on inclusions in W350 non-oriented silicon steel. Metals, 13.10.3390/met13030453 ↗
14. Guo, Z., Li, X., Liu, Y., Zheng, Y., Zhu, L., Zhang, Y., Sun, H., Feng, J., and Cao, R. (2023). Effect of Rare Earth Yttrium on Inclusion Characteristics of Grain-Oriented Silicon Steel. Crystals, 13.10.3390/cryst13060896 ↗
15. Analysis of inclusions in whole smelting process of non-oriented silicon steel 23W1700 by rare earth treatment
16. Effect of solute Ce, Mn, and Si on mechanical properties of silicon steel: Insights from DFT calculations10.1007/s42243-023-01080-7 ↗
17. Effect of lanthanum on inclusions in non-oriented electrical steel slabs10.1007/s42243-023-01135-9 ↗
18. Effects of Erbium modification on the microstructure and mechanical properties of A356 aluminum alloys10.1016/j.msea.2014.12.062 ↗
19. Effect of erbium on microstructure and mechanical properties of Al-Si-Mg-Cu alloy10.1002/mawe.202000057 ↗
20. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
21. Lai, J.K.L., Lo, K.H., and Shek, C.H. (2012). Stainless Steels: An Introduction and Their Recent Developments, Bentham Science Publishers.
22. Rana, R. (2021). Stainless steels. High-Performance Ferrous Alloys, Springer Nature.10.1007/978-3-030-53825-5 ↗
23. Chen, C., Xue, Z., and Mu, W. (2025). Advanced Stainless Steel—From Making, Shaping, Treating to Products. Materials, 18.10.3390/ma18204730 ↗
24. Effect of inclusion and microstructure transformation on corrosion resistance of 316L stainless steel after isothermal heat treatment10.1007/s42243-024-01365-5 ↗
25. Effect of two-pass rolling of textured roll and polished roll on surface topography and mechanical properties of 316L stainless steel ultra-thin strip10.1007/s42243-024-01219-0 ↗
26. The Influence of Cold Deformation and Annealing on Texture Changes in Austenitic Stainless Steel10.12913/22998624/184115 ↗
27. Processing an 18Cr-8Ni Austenitic Stainless Steel Without the Dilemma of the Strength and Ductility Trade-Off10.1007/s11837-023-06230-6 ↗
28. Strengthening and toughening mechanisms of martensite-bainite microstructure in 2 GPa ultra-high strength steel during hot stamping10.1007/s11431-024-2901-8 ↗
29. Effect of ceramic work rolls on surface roughness of rolled SUS304 ultra-thin strips10.1007/s42243-023-01139-5 ↗
30. Cross wedge rolling deformation law and bonding mechanism of 304 stainless steel/Q235 carbon steel bimetallic shaft10.1007/s42243-024-01300-8 ↗
31. Effect of annealing on microstructure and synergistic deformation of 304/TC4 composite plates with corrugated interface10.1007/s42243-024-01376-2 ↗
32. Microstructure and properties of Co-based laser cladded composite coatings10.1515/mt-2023-0362 ↗
33. Poloczek, T., Lont, A., and Górka, J. (2023). The structure and properties of laser-cladded Inconel 625/TiC composite coatings. Materials, 16.10.3390/ma16031265 ↗
34. Yu, Y., Ding, W., Wang, X., Mo, D., and Chen, F. (2025). Study on Microstructure and Wear Resistance of Multi-Layer Laser Cladding Fe901 Coating on 65 Mn Steel. Materials, 18.10.3390/ma18153505 ↗
35. Hammar, O., and Svensson, U. (1997). Solidification and Casting of Metals, The Metal Society.
36. Design of a submerged entry nozzle for optimizing continuous casting of stainless steel slab10.1007/s42243-023-01042-z ↗
37. Ferrite formation and decomposition in 316H austenitic stainless steel electro slag remelting ingot for nuclear power applications10.1016/j.matchar.2024.114581 ↗
38. Solidification modes and delta-ferrite of two types 316L stainless steels: A combination of as-cast microstructure and HT-CLSM research10.1007/s42243-024-01401-4 ↗
39. Xue, Z., Yang, K., Li, Y., Pei, C., Hou, D., Zhao, Q., Wang, Y., Chen, L., Chen, C., and Mu, W. (2025). The Influence of Heat Treatment Process on the Residual Ferrite in 304L Austenitic Stainless Steel Continuous Casting Slab. Materials, 18.10.3390/ma18163724 ↗
40. Ding, Z., Wang, C., Wang, X., Xiao, P., Zhu, L., and Wang, S. (2025). The Influence of Process and Slag Parameters on the Liquid Slag Layer in Continuous Casting Mold for Large Billets. Crystals, 15.10.3390/cryst15050388 ↗
41. Li, G., Tu, L., Wang, Q., Zhang, X., and He, S. (2023). Fluid Flow in Continuous Casting Mold for Ultra-Wide Slab. Materials, 16.10.3390/ma16031135 ↗
42. Asymmetric flow behavior of molten steel in thin slab continuous casting mold10.1007/s11663-023-02931-0 ↗
43. Effect of SEN Asymmetric Clogging on Mold Level Fluctuation and Mold Slag Distribution During Continuous Casting10.1007/s11663-024-03156-5 ↗
44. Numerical simulation of nozzle structure to improve eccentric mold electromagnetic stirring in a round bloom mold10.1007/s42243-024-01192-8 ↗
45. Van Houtte, P. (2009). Crystal Plasticity Based Modelling of Deformation Textures. Microstructure and Texture in Steels, Springer.10.1007/978-1-84882-454-6_12 ↗
46. Shiraiwa, T., Briffod, F., and Enoki, M. (2023). Prediction of Fatigue Crack Initiation of 7075 Aluminum Alloy by Crystal Plasticity Simulation. Materials, 16.10.3390/ma16041595 ↗
47. Abd El-Aty, A., Ha, S., Xu, Y., Hou, Y., Zhang, S.-H., Alzahrani, B., Ali, A., and Ahmed, M.M.Z. (2023). Coupling Computational Homogenization with Crystal Plasticity Modelling for Predicting the Warm Deformation Behaviour of AA2060-T8 Al-Li Alloy. Materials, 16.10.3390/ma16114069 ↗
48. Li, J., Wu, X., and Jiang, H. (2024). Crystal Plasticity Finite Element Simulation of Grain Evolution Behavior in Aluminum Alloy Rolling. Materials, 17.10.3390/ma17153749 ↗
49. Shveykin, A., Trusov, P., and Romanov, K. (2024). Stability of Crystal Plasticity Constitutive Models: Observations in Numerical Studies and Analytical Justification. Metals, 14.10.3390/met14080947 ↗
50. Frydrych, K., Tomczak, M., and Papanikolaou, S. (2024). Crystal Plasticity Parameter Optimization in Cyclically Deformed Electrodeposited Copper—A Machine Learning Approach. Materials, 17.10.20944/preprints202405.2044.v1 ↗
51. Loukadakis, V., and Papaefthymiou, S. (2024). Advancements in and Applications of Crystal Plasticity Modelling of Metallic Materials. Crystals, 14.10.3390/cryst14100883 ↗
52. Understanding of the Fatigue Crack Nucleation in Metallic Sealing Rings by Explicitly Incorporating the Deformation History from Manufacturing to Service10.1016/j.ijfatigue.2022.107174 ↗
53. Mahmoudi, P., Akbarpour, M.R., Lakeh, H.B., Jing, F., Hadidi, M.R., and Akhavan, B. (2022). Antibacterial Ti-Cu implants: A critical review on mechanisms of action. Mater. Today Bio, 17.10.1016/j.mtbio.2022.100447 ↗
54. A short review of antibacterial Cu-bearing stainless steel: Antibacterial mechanisms, corrosion resistance, and novel preparation techniques10.1007/s42243-023-01029-w ↗
55. Song, Q., Yang, L., Yi, F., Chen, C., Guo, J., Qi, Z., and Song, Y. (2024). Antibacterial Pure Magnesium and Magnesium Alloys for Biomedical Materials—A Review. Crystals, 14.10.3390/cryst14110939 ↗