Effect of Co addition on the high-temperature oxidation behavior of oxide-dispersion-strengthened FeCrAl alloys
Source abstract
Abstract
Abstract The effect of Co addition on the high-temperature oxidation behavior of oxide dispersion-strengthened (ODS) FeCrAl alloys was investigated at 1000 °C in air. Exclusively α-Al2O3 scale formed on the surfaces of alloys containing 5 wt.% Al, and Y segregation was observed at the grain boundaries of Al2O3 scale. The solute Y in the Fe12Cr5Al-ODS (wt.%) alloy substrate was decreased by Co addition, thus limiting Y segregation at grain boundaries of the Al2O3 scale. The diminished Y segregation was inferred to cause grain size coarsening, which accounted for the slower oxidation kinetics of 5Al alloys with Co addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Stress corrosion cracking susceptibility of oxide dispersion strengthened ferritic steel in supercritical pressurized water dissolved with different hydrogen and oxygen contents10.1016/j.corsci.2013.09.016 ↗
2. Corrosion behaviour of 16%Cr–4%Al and 16%Cr ODS ferritic steels under different metallurgical conditions in a supercritical water environment10.1016/j.corsci.2010.05.043 ↗
3. Influence of alloy composition and temperature on corrosion behavior of ODS ferritic steels10.1016/j.jnucmat.2010.12.279 ↗
4. Corrosion properties of oxide dispersion strengthened steels in super-critical water environment10.1016/j.jnucmat.2004.04.040 ↗
5. Improvements in high temperature oxidation resistance by additions of reactive elements or oxide dispersions10.1098/rsta.1980.0124 ↗
6. The reactive element effect in commercial ODS FeCrAI alloys10.1080/09603409.1995.11689496 ↗
7. Correlation between the Microstructure, Growth Mechanism, and Growth Kinetics of Alumina Scales on a FeCrAlY Alloy10.1007/s11661-007-9342-z ↗
8. Reverse phase transformation from α to γ in 9Cr-ODS ferritic steels10.1016/j.jnucmat.2010.12.250 ↗
9. High-temperature strength characterization of advanced 9Cr-ODS ferritic steels10.1016/j.msea.2008.04.126 ↗
10. Ukai · J. Nucl. Sci. Technol. · 2002 · 39 · 87210.1080/18811248.2002.9715271 ↗
11. The reactive element effect in high-temperature corrosion10.1016/0921-5093(89)90730-2 ↗
12. The formation of aluminum oxide scales on high-temperature alloys10.1007/BF00666913 ↗
13. The oxidation mechanism of θ-Al2O3 scales10.1016/0167-2738(95)00013-V ↗
14. Effect of the θ-α-Al2O3 transformation on the oxidation behavior of β-NiAl + Zr10.1007/BF00846690 ↗
15. Effects of Platinum on the Interdiffusion and Oxidation Behavior of Ni-Al-Based Alloys10.4028/www.scientific.net/MSF.461-464.213 ↗
16. Early-Stage Oxidation Behavior of Pt-Modified γ′-Ni3Al-Based Alloys with and without Hf Addition10.1007/s11085-008-9125-y ↗
17. High-resolution SIMS and analytical TEM evaluation of alumina scales on β-NiAl containing Zr or Y10.1007/BF01046883 ↗
18. Segregation of Y to grain boundaries in the Al2O3 scale formed on an ODS alloy10.1149/1.2100376 ↗
19. Growth mechanisms of oxide scales on ODS alloys in the temperature range 1000-1100 °C10.1002/maco.19900411204 ↗
20. Modeling of oxidation kinetics of Y-doped Fe–Cr–Al alloys10.1023/A:1004545421739 ↗
21. Effect of Zr on Initial Oxidation Behavior of FeCrAl Alloys10.1007/s11085-020-09972-9 ↗
22. Development and characterization of γ/α transformable FeCrAl-ODS alloys by cobalt addition10.1016/j.jallcom.2019.05.024 ↗
23. Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys10.1016/j.corsci.2005.01.012 ↗
24. The influence of alloying elements on the development and maintenance of protective scales10.1007/BF01046725 ↗
25. Effect of Al content on the oxidation behavior of Y2Ti2O7-dispersed Fe-14Cr ferritic alloys10.1016/j.corsci.2015.11.025 ↗
26. Ukai · 2021 · 2573
27. Growth rates of alumina scales on Fe–Cr–Al alloys10.1023/B:OXID.0000016274.78642.ae ↗
28. High temperature oxidation of FeCrAl-alloys - influence of Al-concentration on oxide layer characteristics10.1002/maco.200805186 ↗
29. High temperature oxidation and corrosion of metals
30. The Effect of an Oxide Dispersion on the Critical Al Content in Fe-Al Alloys10.1023/A:1018862404800 ↗
31. Yttrium influence on the alumina growth mechanism on an FeCr23Al5 alloy10.1016/0169-4332(87)90136-X ↗
32. Thermal conductivity10.1016/0001-6160(57)90127-X ↗
33. Oxidation of metals by short circuit and lattice diffusion of oxygen10.1016/0001-6160(61)90192-4 ↗
34. Rate-determining species in diffusion-controlled processes in Al2O310.1111/j.1151-2916.1971.tb12175.x ↗
35. Determination of lattice and grain boundary diffusion coefficients in protective alumina scales on high temperature alloys using SEM, TEM and SIMS
36. Impurity effects on alumina scale growth10.1111/j.1151-2916.2003.tb03355.x ↗
37. Solubility limits of yttrium and the lanthanide rare-earth elements in chromium and chromium-iron alloys
38. Growth of oxide particles in FeCrAl-oxide dispersion strengthened steels at high temperature10.1016/j.jnucmat.2017.06.018 ↗
39. Precipitation of oxide particles in oxide dispersion strengthened (ODS) ferritic steels10.2320/matertrans.M2018110 ↗