journal article·2026-05-14

Quantitative Characterization of Localized Creep Deformation and Failure in Grade 91 Weldments by Digital Image Correlation‐Augmented Experimentation

Nikhil Suman, J. Ganesh Kumar, G. V. Prasad Reddy, Vikram Jayaram, Praveen Kumar

Publisher page

Abstract

Trimetallic weld joints between Grade‐91, Alloy‐800, and SS316LN steels are used at the steam generator inlet of prototype fast breeder reactors. In this configuration, dissimilar welds between ‘IN82 buttered Grade 91 steel and Alloy 800’ welded with IN182 electrode, are susceptible to premature creep failure. This vulnerability arises from microstructural degradation in Grade 91 adjacent to IN82 caused by thermo‐mechanical effects during buttering, welding, and post‐weld heat treatment. The resulting heat‐affected zone exhibits strong heterogeneity in microstructure, which produces a graded strain field that conventional uniaxial creep tests cannot capture. In this study, digital image correlation is used to map strain evolution and failure in cross‐weld Grade 91 flat subsize specimens tested at 550°C under stresses of 250–325 MPa, and to relate strain localization to microstructure. Strain evolution is highly inhomogeneous across the heat‐affected zone, with local peak strains exceeding 20% in the intercritical heat‐affected zone (ICHAZ), while average strains remain below 5%. Results identify the ICHAZ as the weakest region and the coarse‐grained HAZ as the most creep‐resistant. Rejuvenation of the ICHAZ by reducing precipitate depletion and martensite tempering is expected to improve creep life.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering Indian Institute of Science Bangalore Karnataka India

Metallurgy and Materials Group Indira Gandhi Centre for Atomic Research Kalpakkam Tamil Nadu India

Training School Complex Homi Bhabha National Institute Mumbai Maharastra India

Funding

Department of Atomic Energy, Government of India

References (30)

Show source-provided references
1. Microstructure and Tensile Properties of Dissimilar Weld Joint Between Alloy 800 and Buttered Grade 9110.1007/s11661-022-06941-6 ↗
2. Creep Behavior of Dissimilar Metal Weld Joints between P91 and AISI 30410.1016/j.msea.2017.02.026 ↗
3. Creep rupture properties of dissimilar welded joint of ferritic/martensitic P92 steel and Inconel 617 alloy10.1016/j.engfailanal.2024.108725 ↗
4. Creep Deformation and Rupture Behaviour of Boron‐Added P91 Steel10.1080/02670836.2021.1917182 ↗
5. In situ stress evolution and electrochemical performance of Si‐based anodes for lithium‐ion batteries
6. Experimental Evaluation of Localized Creep Deformation in grade 91 Steel Weldments10.1016/j.msea.2020.140356 ↗
7. Elevated Temperature Ferritic and Martensitic Steels and Their Application to Future Nuclear Reactors10.1179/174328005X41140 ↗
8. Creep Behaviour of Dissimilar Weld Joint between Buttered Grade 91 Steel and Alloy 80010.1016/j.mtcomm.2024.108092 ↗
9. Transition of creep damage region in P91‐Alloy800‐SS316LN dissimilar metals weld joint10.1016/j.matlet.2021.130915 ↗
10. Type IV Damage Evolution during Creep of 316LN SS‐P91 Steel Dissimilar Weld Joint10.1007/s11665-023-08189-6 ↗
11. Customized High‐Temperature Bending with DIC for High‐Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization10.1007/s11837-020-04445-5 ↗
12. High‐throughput Creep Evaluation of IN738LC in Bending Using Digital Image Correlation at 850°C10.1016/j.msea.2025.149479 ↗
13. Clarification of creep deformation mechanism in heat‐affected zone of 9Cr steels with In Situ experiments10.1016/j.scriptamat.2020.113640 ↗
14. Characteristics of Premature Creep Failure in over‐Tempered Base Metal of grade 91 Steel Weldment10.1016/j.ijpvp.2021.104396 ↗
15. Development and Deployment of Welding Technologies for the Indian Sodium‐Cooled Fast Reactor and Advanced Ultra‐supercritical Thermal Power Programmes10.1007/s12666-021-02260-3 ↗
16. Estimation of stress redistribution for the extraction of power law creep parameters from bending10.1016/j.mechmat.2022.104518 ↗
17. Proportional‐stress points in cantilevers: Identification and application to high throughput extraction of plastic flow parameters10.1007/s10853-025-11293-8 ↗
18. Creep Deformation Mechanisms in Modified 9Cr–1Mo Steel10.1016/j.jnucmat.2012.01.005 ↗
19. Creep Behaviour of Modified 9Cr–1Mo Ferritic Steel10.1016/j.jnucmat.2011.02.024 ↗
20. Creep Behaviour of P91/GTR‐2CM/12Cr1MoV Dissimilar Joint Predicted by the Modified Theta Method10.1080/09603409.2017.1310441 ↗
21. Clarifying creep‐susceptible zone in 9Cr steel weldments via interrupted testing10.1016/j.ijpvp.2025.105480 ↗
22. Correlation Between Intercritical Heat‐Affected Zone and Type IV Creep Damage Zone in Grade 91 Steel10.1007/s11661-018-4490-x ↗
23. Review Type IV Cracking in Ferritic Power Plant Steels10.1179/174328406X148778 ↗
24. Creep and Creep Rupture of ERNiCr‐3 Weld Metal10.1016/0022-3115(81)90398-6 ↗
25. Creep Performance and Microstructural Characterization of Electron‐Beam Welded 316LN SS‐Grade 91 Steel Dissimilar Joint10.1007/s11661-023-07074-0 ↗
26. Influence of Welding Process on Type IV Cracking Behavior of P91 Steel10.1016/j.msea.2014.06.089 ↗
27. Characterization of Microstructures across the Heat‐Affected Zone of the Modified 9Cr‐1Mo Weld Joint to Understand Its Role in Promoting Type IV Cracking10.1007/s11661-006-9050-0 ↗
28. Dissimilar metal welding of P91 steel‐AISI 316L SS with Incoloy 800 and Inconel 600 interlayers by using activated TIG welding process and its effect on the microstructure and mechanical properties10.1016/j.jmatprotec.2019.116280 ↗
29. Role of Microstructures on Heterogeneous Creep Behaviour across P91 Steel Weld Joint Assessed by Impression Creep Testing10.1016/j.matchar.2019.109988 ↗
30. Analysis of creep in a welded ‘P91’ pressure vessel10.1016/0308-0161(94)90125-2 ↗