Near‐Field Electrospinning Micro‐Printhead Achieves Precise Control of Nanofiber Deposition
Source abstract
Abstract
As a high‐resolution, cost‐effective, and rapid fabrication method, near‐field electrospinning enables the formation of micro‐ and nanostructures, positioning it as a promising tool also for advanced nanomanufacturing. However, stable fabrication of sub‐100‐nm well‐aligned fibers remains challenging due to the complex interplay of process parameters. In this work, reliable nanofiber fabrication is established using a custom‐built near‐field electrospinning setup, based on a micro‐printhead having an inner nozzle diameter below 50 µm. A voltage‐based classification of jetting region cutoff, fiber formation, and supersaturation is proposed, indicating that continuous nanofiber fabrication is only achievable within a fiber formation parameter region. Thus, augmented by an increase in the relative printhead‐substrate velocity, well‐placed nanofibers with diameters down to 50 nm are fabricated reproducibly. Additionally, the influence of nozzle outlet size on the required operating voltage and resulting fiber morphology is investigated. This work deepens understanding of the near‐field electrospinning process and provides a robust and precise method for fabricating polymer nanofibers as low as 25 nm diameter, contributing a decided advance in facile 3D nanostructuring.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Near-Field Optical Microscopy · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Microstructure Technology Karlsruhe Institute of Technology Eggenstein‐Leopoldshafen Germany
Funding
Deutsche Forschungsgemeinschaft · Helmholtz-Gemeinschaft
References (38)
Show source-provided references
1. 10.1002/smll.20220525510.1002/smll.202205255 ↗
2. 10.1039/c3nr04329k10.1039/c3nr04329k ↗
3. 10.1016/j.mtadv.2023.10046110.1016/j.mtadv.2023.100461 ↗
4. 10.1002/admt.20210041010.1002/admt.202100410 ↗
5. 10.1002/smll.20230926910.1002/smll.202309269 ↗
6. 10.1038/s43586-023-00278-z10.1038/s43586-023-00278-z ↗
7. 10.1098/rspa.1969.020510.1098/rspa.1969.0205 ↗
8. 10.1021/ac049817r10.1021/ac049817r ↗
9. 10.1063/1.151066410.1063/1.1510664 ↗
10. 10.1146/annurev.fluid.39.050905.11015910.1146/annurev.fluid.39.050905.110159 ↗
11. 10.1146/annurev.fluid.29.1.2710.1146/annurev.fluid.29.1.27 ↗
12. 10.1017/S002211209400347210.1017/S0022112094003472 ↗
13. 10.1016/S0021-8502(96)00433-810.1016/S0021-8502(96)00433-8 ↗
14. 10.1021/nl060270110.1021/nl0602701 ↗
15. 10.1021/acsabm.1c0094410.1021/acsabm.1c00944 ↗
16. 10.1063/1.37353210.1063/1.373532 ↗
17. 10.1016/j.polymer.2008.02.00210.1016/j.polymer.2008.02.002 ↗
18. 10.1021/acs.jpcc.6b1278310.1021/acs.jpcc.6b12783 ↗
19. 10.1021/la404704z10.1021/la404704z ↗
20. 10.1088/0022-3727/43/41/41550110.1088/0022-3727/43/41/415501 ↗
21. 10.1016/j.polymer.2004.01.02410.1016/j.polymer.2004.01.024 ↗
22. 10.1063/1.297583410.1063/1.2975834 ↗
23. 10.1021/nl200616410.1021/nl2006164 ↗
24. 10.1038/nmat197410.1038/nmat1974 ↗
25. 10.1002/adfm.20150370510.1002/adfm.201503705 ↗
26. 10.1038/ncomms189110.1038/ncomms1891 ↗
27. 10.1002/smsc.20210007310.1002/smsc.202100073 ↗
28. 10.3390/polym1307109710.3390/polym13071097 ↗
29. 10.1038/s41598-017-12189-710.1038/s41598-017-12189-7 ↗
30. 10.1021/la403111m10.1021/la403111m ↗
31. 10.1016/j.matdes.2015.09.14110.1016/j.matdes.2015.09.141 ↗
32. 10.1063/1.368246410.1063/1.3682464 ↗
33. 10.1063/1.358514810.1063/1.3585148 ↗
34. 10.1016/j.polymer.2007.08.00210.1016/j.polymer.2007.08.002 ↗
35. 10.1038/s41467-020-14557-w10.1038/s41467-020-14557-w ↗
36. 10.1002/adem.20210174010.1002/adem.202101740 ↗
37. 10.1007/978-3-031-48439-110.1007/978-3-031-48439-1 ↗
38. 10.1016/j.jcis.2009.03.01410.1016/j.jcis.2009.03.014 ↗