journal article·2026-07-22

Ultrasonic Strengthening of the Mechanical Properties of AZ31B Magnesium Alloy via Ti/SiC Powder Infiltration and Microstructural Refinement

Zhongwei Liang, Qizhao Zhong, Yunqi Zhong, Yanjun Chen, Zhuan Zhao, Lingli Jiang

Advanced Engineering Materials· Volume 28· Issue 14
Publisher page

Abstract

This study investigated the mechanical properties of AZ31B magnesium alloy using the ultrasonic strengthening grinding process (USGP) with a mixed medium of ZrO 2 balls, Ti, and SiC powders. Different USGP treatment durations were performed. Results show that suitable USGP treatment leads to significant enhancement in both ultimate tensile strength (UTS) and total elongation (TE). Key findings reveal that the sample subjected to 4 min of USGP exhibits superior tensile strength, with an increase of 25.61% compared to the untreated sample at a tensile rate of 1 mm/min. For the sample subjected to 10 min of USGP, tensile strength is slightly reduced yet remains 21.4% higher than that of the untreated sample, while ductility reaches its maximum value, showing a remarkable improvement of 54.54% compared to the untreated sample. The phenomenon can be attributed to a synergistic interplay between powder embedding and plastic deformation. Severe plastic deformation induced by shot peening leads to significant grain refinement and an increase in dislocation density. Concurrently, embedded ductile Ti particles with a hexagonal close‐packed structure enhance fracture strain of the composite through coordinated deformation with the matrix, while hard SiC particles contribute to strengthening via load‐transfer effects and Orowan bypass mechanisms.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical and Electrical Engineering Guangzhou University Guangzhou China

Guangdong Engineering Research Centre for Strengthen Grinding and Micro/Nano High‐Performance Machining Guangzhou University Guangzhou China

School of Mechatronic Engineering and Automation Foshan University Foshan China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Natural Science Foundation of Guangdong Province

References (61)

Show source-provided references
1. 10.1016/j.msea.2007.07.07310.1016/j.msea.2007.07.073 ↗
2. 10.17222/mit.2019.06510.17222/mit.2019.065 ↗
3. 10.3390/app1115686110.3390/app11156861 ↗
4. Magnesium and Aluminum Alloys in Automotive Industry
5. 10.1016/j.surfcoat.2019.05.03510.1016/j.surfcoat.2019.05.035 ↗
6. 10.1016/j.biomaterials.2004.09.04910.1016/j.biomaterials.2004.09.049 ↗
7. 10.1007/s11665-022-07760-x10.1007/s11665-022-07760-x ↗
8. Wire‐Based Friction Stir Additive Manufacturing of AZ31B Magnesium Alloy: Precipitate Behavior and Mechanical Properties
9. 10.1016/j.matchar.2017.05.01010.1016/j.matchar.2017.05.010 ↗
10. 10.1016/j.matdes.2015.08.05210.1016/j.matdes.2015.08.052 ↗
11. 10.1016/j.msea.2016.07.05210.1016/j.msea.2016.07.052 ↗
12. 10.1007/s11665-021-05723-210.1007/s11665-021-05723-2 ↗
13. 10.1016/j.msec.2017.04.12810.1016/j.msec.2017.04.128 ↗
14. 10.1016/j.jmrt.2023.06.22710.1016/j.jmrt.2023.06.227 ↗
15. 10.1007/s12541-021-00501-510.1007/s12541-021-00501-5 ↗
16. 10.3390/ma1414384110.3390/ma14143841 ↗
17. 10.1016/j.msea.2021.14102910.1016/j.msea.2021.141029 ↗
18. 10.1007/s11665-022-06992-110.1007/s11665-022-06992-1 ↗
19. 10.1016/j.jallcom.2018.08.14110.1016/j.jallcom.2018.08.141 ↗
20. 10.3390/ma1216250310.3390/ma12162503 ↗
21. 10.1201/978143982362010.1201/9781439823620 ↗
22. 10.1016/j.surfcoat.2020.12608010.1016/j.surfcoat.2020.126080 ↗
23. 10.3390/ma1714338610.3390/ma17143386 ↗
24. 10.1007/s11665-021-05821-110.1007/s11665-021-05821-1 ↗
25. 10.1016/j.jmrt.2024.05.18710.1016/j.jmrt.2024.05.187 ↗
26. 10.1016/j.triboint.2023.10892110.1016/j.triboint.2023.108921 ↗
27. 10.1016/j.msea.2024.14741210.1016/j.msea.2024.147412 ↗
28. N.SusiloandA.Syahrial “Characteristics of composite magnesium with micro SiC particle for automotive applications with stir casting method ” in IOP Conference Series: Materials Science and Engineering (IOP Publishing 2020) 012028.10.1088/1757-899X/902/1/012028 ↗
29. 10.1016/j.msea.2020.13929810.1016/j.msea.2020.139298 ↗
30. 10.1016/j.mtla.2019.10037610.1016/j.mtla.2019.100376 ↗
31. 10.1016/j.matchar.2026.11624610.1016/j.matchar.2026.116246 ↗
32. 10.1016/j.actamat.2024.12061810.1016/j.actamat.2024.120618 ↗
33. 10.1016/j.surfcoat.2022.12860110.1016/j.surfcoat.2022.128601 ↗
34. 10.1007/s11661-005-0032-410.1007/s11661-005-0032-4 ↗
35. 10.1016/j.actamat.2020.01.01710.1016/j.actamat.2020.01.017 ↗
36. 10.1080/02670836.2022.210550110.1080/02670836.2022.2105501 ↗
37. Deformation Mechanism of High Ductility Mg‐Gd‐Mn Alloy during Tensile Process
38. 10.1016/j.msea.2023.14581210.1016/j.msea.2023.145812 ↗
39. 10.1016/j.jmrt.2025.04.19310.1016/j.jmrt.2025.04.193 ↗
40. 10.1016/j.actamat.2011.04.02510.1016/j.actamat.2011.04.025 ↗
41. 10.1016/j.apsusc.2015.08.11010.1016/j.apsusc.2015.08.110 ↗
42. 10.1016/j.triboint.2014.11.00610.1016/j.triboint.2014.11.006 ↗
43. 10.1016/j.surfcoat.2025.13268710.1016/j.surfcoat.2025.132687 ↗
44. 10.3390/coatings1509107110.3390/coatings15091071 ↗
45. 10.1179/sur.1994.10.1.5610.1179/sur.1994.10.1.56 ↗
46. 10.1016/j.ijplas.2012.03.00710.1016/j.ijplas.2012.03.007 ↗
47. 10.1007/s11661-013-2094-z10.1007/s11661-013-2094-z ↗
48. 10.1016/j.msea.2024.14638810.1016/j.msea.2024.146388 ↗
49. 10.1007/s12540-022-01334-110.1007/s12540-022-01334-1 ↗
50. 10.1016/j.jmapro.2020.10.03210.1016/j.jmapro.2020.10.032 ↗
51. 10.1007/s00170-024-14365-210.1007/s00170-024-14365-2 ↗
52. 10.1016/j.msea.2019.04.05410.1016/j.msea.2019.04.054 ↗
53. 10.1016/j.matchar.2018.12.00110.1016/j.matchar.2018.12.001 ↗
54. 10.1016/j.surfcoat.2018.02.00910.1016/j.surfcoat.2018.02.009 ↗
55. 10.1016/j.engfracmech.2023.10948010.1016/j.engfracmech.2023.109480 ↗
56. 10.1007/s10853-006-7178-310.1007/s10853-006-7178-3 ↗
57. 10.1016/j.ijplas.2004.05.01810.1016/j.ijplas.2004.05.018 ↗
58. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
59. 10.1016/j.corsci.2023.11164010.1016/j.corsci.2023.111640 ↗
60. 10.1016/j.jmrt.2023.08.07910.1016/j.jmrt.2023.08.079 ↗
61. 10.1007/s11661-001-0167-x10.1007/s11661-001-0167-x ↗