journal article·2026-07-22Open access

Enhancing Strength and Electrical Conductivity in Al–Zr–Sc Conductor Alloys Through Sn and Sr Microalloying and Two‐Step Aging Treatment

Quan Shao, Emad M. Elgallad, Alexandre Maltais, X.‐Grant Chen

Advanced Engineering Materials· Volume 28· Issue 14

Abstract

Trace additions of Sn (0.05 and 0.15 wt.%) and Sr (0.006 and 0.013 wt.%) combined with a novel two‐step aging treatment were introduced into Al–Zr–Sc conductor alloys to investigate their effects on microstructure and mechanical properties. The additions of Sn or Sr, together with two‐step aging, improved the mechanical strength and electrical conductivity (EC) of the alloys. In the Sn15 alloy, two‐step aging enhanced microhardness, ultimate tensile strength, and EC to 78.3 HV, 216 MPa, and 58.3% IACS (International Annealed Copper Standard), respectively, compared with 74.2 HV, 206 MPa, and 57.5% IACS after conventional one‐step aging. Similarly, the Sr13 alloy exhibited improved properties, with 83.2 HV, 227 MPa, and 58.0% IACS after two‐step aging, versus 78.3 HV, 215 MPa, and 57.5% IACS with one‐step aging. These improvements—5.5 HV, 10 MPa, and 0.8% IACS for the Sn15 alloy; 5.2 HV, 12 MPa, and 0.7% IACS for the Sr13 alloy—are primarily attributed to the precipitation of a larger number of fine Al 3 (Sc, Zr) strengthening precipitates. Early‐stage Al 3 (Sc, Zr) precipitation was observed in the Sn15 alloy after the first‐step aging at 300°C for 4 hr. In the Sr‐containing alloys, enhanced strengthening was also associated with increased dislocation resistance in the presence of stacking faults. The trace additions of Sn or Sr, combined with two‐step aging, offer a cost‐effective strategy for developing the next generation of thermally stable, high‐performance conductor alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Applied Science University of Quebec at Chicoutimi Saguenay Quebec Canada

Arvida Research and Development Centre Rio Tinto Aluminium Saguenay Quebec Canada

Funding

Natural Sciences and Engineering Research Council of Canada

References (36)

Show source-provided references
1. 10.1007/s10853-015-9354-910.1007/s10853-015-9354-9 ↗
2. JL Blackburn “Symmetrical components for power systems engineering” CRC press 2017).10.1201/9781315222356 ↗
3. 10.1007/s12613-024-2879-710.1007/s12613-024-2879-7 ↗
4. 10.1007/s12613-024-2882-z10.1007/s12613-024-2882-z ↗
5. 10.1016/j.matdes.2011.07.00310.1016/j.matdes.2011.07.003 ↗
6. 10.1016/j.matdes.2011.04.03410.1016/j.matdes.2011.04.034 ↗
7. Thermal Stability of an Al‐Mg‐Si Alloy after Equal Channel Angular Pressing
8. Developing Al‐Zr‐Sc Alloys as High‐Temperature‐Resistant Conductors for Electric Overhead Line Applications
9. 10.1016/j.addma.2020.10146110.1016/j.addma.2020.101461 ↗
10. 10.1016/j.jmst.2018.11.00410.1016/j.jmst.2018.11.004 ↗
11. 10.1016/j.jmst.2018.12.02310.1016/j.jmst.2018.12.023 ↗
12. 10.1016/j.msea.2019.03.10410.1016/j.msea.2019.03.104 ↗
13. 10.1007/s12613-024-2841-810.1007/s12613-024-2841-8 ↗
14. 10.1016/j.actamat.2010.05.05410.1016/j.actamat.2010.05.054 ↗
15. 10.1016/j.jmrt.2023.07.16910.1016/j.jmrt.2023.07.169 ↗
16. 10.1016/j.jmst.2017.01.01710.1016/j.jmst.2017.01.017 ↗
17. 10.1016/j.jmrt.2025.01.04310.1016/j.jmrt.2025.01.043 ↗
18. 10.1007/s10853-023-08513-410.1007/s10853-023-08513-4 ↗
19. 10.1007/s11837-019-03422-x10.1007/s11837-019-03422-x ↗
20. 10.3390/ma1304091310.3390/ma13040913 ↗
21. 10.3390/ma1615545010.3390/ma16155450 ↗
22. 10.1016/j.jallcom.2017.01.03910.1016/j.jallcom.2017.01.039 ↗
23. 10.1016/j.msea.2019.04.04210.1016/j.msea.2019.04.042 ↗
24. 10.3390/met701001310.3390/met7010013 ↗
25. Microstructural Evolution and Strengthening Mechanisms of a Novel Al–11Si–3Cu Alloy Microalloyed with Minor Contents of Sr and Sc
26. 10.3390/nano1212207810.3390/nano12122078 ↗
27. 10.1016/j.matchar.2015.02.01610.1016/j.matchar.2015.02.016 ↗
28. 10.3390/ma1708177210.3390/ma17081772 ↗
29. 10.1016/j.msea.2018.10.05810.1016/j.msea.2018.10.058 ↗
30. 10.1016/j.commatsci.2015.06.01510.1016/j.commatsci.2015.06.015 ↗
31. 10.1016/j.jallcom.2025.18043310.1016/j.jallcom.2025.180433 ↗
32. International Standard IEC · Thermal‐Resistant Aluminium Alloy Wire for Overhead Line Conductor · 62004 · 2007
33. 10.1016/j.actamat.2007.06.03910.1016/j.actamat.2007.06.039 ↗
34. 10.1016/j.matdes.2015.04.03710.1016/j.matdes.2015.04.037 ↗
35. 10.1038/s41467-017-01729-410.1038/s41467-017-01729-4 ↗
36. 10.1016/j.ijmecsci.2021.10695310.1016/j.ijmecsci.2021.106953 ↗