The effect of zinc addition on corrosion behavior of stainless steels with different phases in simulated PWR primary water
Source abstract
Abstract
In this study, corrosion behaviors of commercial austenitic, ferritic stainless steels, and duplex stainless steel with B2-NiAl were investigated in simulated PWR primary water environments with and without zinc addition. In addition, electrochemical methods such as EIS and Mott-Schottky analyses were utilized to investigate oxide layers. Zinc was incorporated mainly into chromium-rich spinel. For austenitic stainless steel, improvement on corrosion was observed, however other stainless steels showed less effects by zinc addition. It was found that beneficial effect of zinc addition depends on chromium content of matrix and the presence of low chromium-containing phase reduced beneficial effect.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Material selection for accident tolerant fuel cladding
2. Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions10.1016/j.jnucmat.2016.10.021 ↗
3. Characterization of SiC–SiC composites for accident tolerant fuel cladding10.1016/j.jnucmat.2015.08.020 ↗
4. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
5. Uniform corrosion of FeCrAl alloys in LWR coolant environments10.1016/j.jnucmat.2016.06.047 ↗
6. Characterization of oxides formed on iron-chromium-aluminum alloy in simulated light water reactor environments10.1515/corrrev-2017-0011 ↗
7. Development and quality assessments of commercial heat production of ATF FeCrAl tubes
8. The effect of heat treatment on recrystallized microstructure, precipitation and ductility of hot-rolled Fe–Cr–Al–REM ferritic stainless steel sheets10.1016/j.msea.2012.11.008 ↗
9. Neutronics and fuel performance evaluation of accident tolerant FeCrAl cladding under normal operation conditions10.1016/j.anucene.2015.06.032 ↗
10. Development of alumina-forming duplex stainless steels as accident-tolerant fuel cladding materials for light water reactors10.1016/j.jnucmat.2018.04.027 ↗
11. Feasibility assessment of the alumina‐forming duplex stainless steels as accident tolerant fuel cladding materials for light water reactors10.1002/er.5021 ↗
12. Corrosion behavior of stainless steels in simulated PWR primary water: The effect of composition and matrix phases10.1016/j.corsci.2020.108991 ↗
13. Corrosion behavior of Fe-based candidate accident tolerant fuel cladding alloys in spent fuel pool environment―Effect of prior corrosion10.1016/j.jnucmat.2021.152845 ↗
14. Research Report VTT-R-05511-11
15. The effect of high-temperature water chemistry and dissolved zinc on the cobalt incorporation on type 316 stainless steel oxide10.1016/j.corsci.2018.05.041 ↗
16. The addition of zinc to primary reactor coolant for enhanced PWSCC resistance
17. The effect of Zinc addition to simulated PWR primary water on the PWSCC resistance, crack growth rate and surface oxide films characteristics of prefilmed Alloy 600
18. Overview report on zinc addition in pressurized water reactors–2004
19. Thermodynamic Consideration on the Effect of Zinc Injection into PWR Primary Coolant for the Reduction of Radiation Build Up and Corrosion Control
20. Zinc treatment effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water
21. Zinc water chemistry reduces dissolution of FeCrAl for nuclear fuel cladding10.1016/j.corsci.2022.110156 ↗
22. Characterization of interfacial reactions and oxide films on 316L stainless steel in various simulated PWR primary water environments10.1016/j.jnucmat.2017.03.029 ↗
23. A study of the oxidation of FeCrAl alloy in pressurized water and high-temperature steam environment10.1016/j.corsci.2015.02.027 ↗
24. Influence of Zn injection on corrosion of 304SS under PWR primary side conditions10.3389/fmats.2022.833291 ↗
25. Composition, structure and properties of the oxide films formed on the stainless steel 316L in a primary type PWR environment10.1016/S0010-938X(97)00158-3 ↗
26. TEM investigations of the oxide layers formed on a 316L alloy in simulated PWR environment10.1007/s10853-012-6975-0 ↗
27. Electrochemical and Stress Corrosion Behaviors of 316L Stainless Steel in the Borate solution10.20964/2020.05.44 ↗
28. In SR-GIXRD Study of Oxide Film Evaluation on AISI 304 Stainless Steel in High Temperature Water10.1007/s12540-019-00276-5 ↗
29. Characterization of oxide layers formed on type 316 stainless steel exposed to the simulated PWR primary water environment with varying dissolved hydrogen and zinc concentrations10.1016/j.jnucmat.2021.153193 ↗
30. EIS study of passivation of austenitic and duplex stainless steels reinforcements in simulated pore solutions10.1016/j.cemconcomp.2006.01.012 ↗
31. Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment10.1016/j.net.2018.10.007 ↗
32. Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel10.1016/j.corsci.2020.109187 ↗
33. Low-cycle fatigue behaviors of 316L austenitic stainless steels with different surface finishing in simulated pressurized water reactor primary water and an oxygenated, borated, lithiated high temperature water10.1016/j.corsci.2021.109709 ↗
34. Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution10.1016/j.corsci.2009.08.006 ↗
35. Electrochemical impedance spectroscopy (EIS) of NaCl-saturated sandy soil at sub-zero temperatures10.20964/2021.09.02 ↗
36. Influence of incorporated Mo and Nb on the Mott–Schottky behaviour of anodic films formed on AISI 304L10.1016/j.corsci.2010.04.021 ↗
37. Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy10.1016/j.corsci.2010.07.013 ↗
38. Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments10.1016/j.corsci.2010.06.016 ↗
39. Influence of Zn injection on characteristics of oxide film on 304 stainless steel in borated and lithiated high temperature water10.1016/j.corsci.2011.06.011 ↗
40. The mechanism of high temperature aqueous corrosion of stainless steels10.1016/0010-938X(91)90125-9 ↗
41. Thermodynamic Analysis and Crystallographic Properties of MFe2O4, MCr2O4 and MAl2O4 (M= Fe, Ni, Zn) Formed on Structural Materials in Pressurized Water Reactor Primary Circuit under Zinc and Zinc-aluminum Water Chemistry10.3390/e24020245 ↗
42. Effect of thermal aging on oxide film of stainless steel weld overlay cladding exposed to high temperature water10.1016/j.matchar.2018.02.010 ↗
43. Effect of zinc injection on the electrochemical behavior and crack growth rate of a 316 L stainless steel in simulated primary coolant of pressurized water reactors10.1016/j.matchar.2021.111177 ↗
44. The thermodynamics of cation distributions in simple spinels10.1016/0022-1902(67)80008-3 ↗
45. Effects of magnesium and zinc additives on corrosion and cobalt contamination of stainless steels in simulated BWR coolant10.13182/NT99-A2950 ↗
46. Effect of zinc addition scenarios on general corrosion of Alloy 690 in borated and lithiated water at 330C10.1016/j.corsci.2021.109627 ↗
47. Corrosion behavior of Alloy 690 after cessation of zinc addition in simulated PWR primary water at 330° C10.1016/j.jnucmat.2021.153147 ↗
48. Immiscibility in the nickel ferrite–zinc ferrite spinel binary10.1016/j.jpcs.2007.03.025 ↗
49. Wu · Influ. Zn. Inject. Corros. Behav. oxide Film. Charact. 304 Stainl. Steel borated lithiated High. Temp. Water · 2012
50. XPS study of oxides formed on nickel‐base alloys in high‐temperature and high‐pressure water
51. Structural, morphological and dielectric investigation of spinel chromite (XCr2O4, X= Zn, Mn, Cu & Fe) nanoparticles10.1007/s10854-019-02111-4 ↗