Protective nature of cerium-based oxides coating against Mg corrosion in Hanks’ balanced salt solution
Source abstract
Abstract
The cerium-based coatings have attracted increasing attention for modifying Mg surface in biomedical applications due to their corrosion protectiveness and potential biological effects. However, their anti-corrosion mechanisms have not been fully understood. In this work, the corrosion resistance of anodic electrodeposited cerium-based oxides coating on Mg alloy was investigated in Hanks’ balanced salt solution. The obtained results demonstrate that the strengthened precipitation of protective calcium phosphate products on this coating results in its enhanced anti-corrosion nature. These findings enrich the understanding on anti-corrosion mechanisms of the cerium-based coating and point out its prospect on Mg alloys for bone implants.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Design of the double-layer biocompatible coating on AZ31 magnesium alloy for highly effective corrosion resistance10.1016/j.surfcoat.2021.127897 ↗
2. Magnesium and its alloys as orthopedic biomaterials: A review10.1016/j.biomaterials.2005.10.003 ↗
3. Advances in hydroxyapatite coatings on biodegradable magnesium and its alloys10.1016/j.jma.2022.01.001 ↗
4. Corrosion resistance and cytocompatibility of magnesium–calcium alloys modified with zinc- or gallium-doped calcium phosphate coatings10.1021/acsami.1c16307 ↗
5. Deposition temperature effect on sputtered hydroxyapatite coatings prepared on AZ31B alloy substrate10.1016/j.ceramint.2021.12.258 ↗
6. Formation of self-healing PEO coatings on AM50 Mg by in-situ incorporation of zeolite micro-container10.1016/j.corsci.2022.110785 ↗
7. Black Mn-containing layered double hydroxide coated magnesium alloy for osteosarcoma therapy, bacteria killing, and bone regeneration
8. Retardation and self-repair of erosion pits by a two-stage barrier on bioactive-glass/layered double hydroxide coating of biomedical magnesium alloys10.1016/j.surfcoat.2020.126562 ↗
9. Microstructure, corrosion resistance, and antibacterial properties of an Ag/Mg-Al layered double hydroxide coating synthesized in situ on biomedical Mg-Zn-Ca alloy10.1016/j.ceramint.2021.09.315 ↗
10. A self-healing and bioactive coating based on duplex plasma electrolytic oxidation/polydopamine on AZ91 alloy for bone implants10.1016/j.jma.2022.05.020 ↗
11. Corrosion resistance and biocompatibility of polydopamine/hyaluronic acid composite coating on AZ31 magnesium alloy
12. In vitro degradation, photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca–P coating on magnesium alloy AZ31
13. Construction of a magnesium hydroxide/graphene oxide/hydroxyapatite composite coating on Mg–Ca–Zn–Ag alloy to inhibit bacterial infection and promote bone regeneration
14. Electrodeposition of ceria-based layers on zinc electroplated steel10.1016/j.corsci.2009.11.027 ↗
15. Passivity of OC404 steel modified electrochemically with CeO2–Ce2O3 layers in sulfuric acid media10.1016/j.electacta.2009.10.057 ↗
16. Corrosion protective ability of electrodeposited ceria layers10.1007/s10008-012-1937-7 ↗
17. Cerium-based oxide coatings10.1016/j.cossms.2014.11.005 ↗
18. Self-healing effect of ceria electrodeposited thin films on stainless steel in aggressive 0.5 mol/L NaCl aqueous solution10.1016/S1002-0721(14)60548-2 ↗
19. 6 - Ceria-based coatings and pigments
20. Novel smart and self-healing cerium phosphate-based corrosion inhibitor for AZ31 magnesium alloy10.1016/j.corsci.2020.108648 ↗
21. Effects of combined organic and inorganic corrosion inhibitors on the nanostructure cerium based conversion coating performance on AZ31 magnesium alloy: Morphological and corrosion studies10.1016/j.corsci.2017.08.017 ↗
22. Microstructure and electrochemical behavior of cerium conversion coating modified with silane agent on magnesium substrates10.1016/j.apsusc.2016.03.150 ↗
23. Corrosion behaviors in physiological solution of cerium conversion coatings on AZ31 magnesium alloy10.1016/j.apsusc.2011.04.141 ↗
24. Cerium-based coating for enhancing the corrosion resistance of bio-degradable Mg implants10.1016/j.matchemphys.2009.09.010 ↗
25. Effect of the pH of the electrolyte on the formation and on the corrosion properties of ceria based coating on carbon steel10.1002/maco.201810302 ↗
26. Review of rare-earth-based conversion coatings for magnesium and its alloys10.1016/j.jmrt.2019.08.013 ↗
27. Antioxidant mesoporous Ce-doped bioactive glass nanoparticles with anti-inflammatory and pro-osteogenic activities
28. Cerium-doped whitlockite nanohybrid scaffolds promote new bone regeneration via SMAD signaling pathway10.1016/j.cej.2018.11.116 ↗
29. The role of rare earth elements in bone tissue engineering scaffolds - A review10.1016/j.compositesb.2022.109758 ↗
30. Self-healing ceria-modified coating for corrosion protection of AZ31 magnesium alloy10.1016/j.corsci.2018.06.013 ↗
31. Modulation of coordinative unsaturation degree and valence state for cerium-based adsorbent to boost phosphate adsorption10.1016/j.cej.2020.124912 ↗
32. Biochar-loaded Ce3+-enriched ultra-fine ceria nanoparticles for phosphate adsorption10.1016/j.jhazmat.2020.122626 ↗
33. Electrodeposition of oriented cerium oxide films10.1155/2013/482187 ↗
34. Improvement of corrosion resistance of AZ31 Mg alloy by anodizing with co-precipitation of cerium oxide10.1016/S1003-6326(08)60370-2 ↗
35. Selecting medium for corrosion testing of bioabsorbable magnesium and other metals – A critical review10.1016/j.corsci.2020.108722 ↗
36. Ab-initio simulations of materials using VASP: Density-functional theory and beyond10.1002/jcc.21057 ↗
37. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
38. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
39. Density‐functional thermochemistry. IV. A new dynamical correlation functional and implications for exact‐exchange mixing10.1063/1.470829 ↗
40. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
41. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
42. Fabrication of duplex coatings on biodegradable AZ31 magnesium alloy by integrating cerium conversion (CC) and plasma electrolytic oxidation (PEO) processes10.1016/j.jallcom.2017.06.119 ↗
43. Nucleation and growth of anodic electrodeposited cerium oxide thin film10.20964/2017.06.04 ↗
44. Cerium-based sealing of PEO coated AM50 magnesium alloy10.1016/j.surfcoat.2015.01.003 ↗
45. Probing the in-depth distribution of organic/inorganic molecular species within the SEI of LTO/NMC and LTO/LMO batteries: A complementary ToF-SIMS and XPS study10.1016/j.apsusc.2019.144266 ↗
46. Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy10.1016/j.cej.2021.131198 ↗
47. Ce 3d XPS investigation of cerium oxides and mixed cerium oxide (CexTiyOz)10.1002/sia.2686 ↗
48. In vitro degradation resistance of glucose and L-cysteine-bioinspired Schiff-base anodic Ca–P coating on AZ31 magnesium alloy10.1016/S1003-6326(22)65888-6 ↗
49. Proteins incorporated into biomimetically prepared calcium phosphate coatings modulate their mechanical strength and dissolution rate10.1016/S0142-9612(02)00252-1 ↗
50. Using scratch testing to measure the adhesion strength of calcium phosphate coatings applied to poly(carbonate urethane) substrates10.1016/j.jmbbm.2011.10.010 ↗
51. Degradation and biocompatibility of one-step electrodeposited magnesium thioctic acid/magnesium hydroxide hybrid coatings on ZE21B alloys for cardiovascular stents
52. Corrosion resistance and adhesion strength of a spin-assisted layer-by-layer assembled coating on AZ31 magnesium alloy10.1016/j.apsusc.2017.11.012 ↗
53. Corrosion resistance of one-step superhydrophobic polypropylene coating on magnesium hydroxide-pretreated magnesium alloy AZ3110.1016/j.jallcom.2019.153515 ↗
54. Clarifying the influence of albumin on the initial stages of magnesium corrosion in Hank's balanced salt solution10.1016/j.jma.2020.07.002 ↗
55. The self-healing ability of cerium oxide films on carbon steel10.6001/chemija.2015.26.3.6 ↗
56. Growth mechanisms of cerium layers on galvanised steel10.1016/S0013-4686(03)00507-3 ↗
57. Dual self-healing inorganic-organic hybrid coating on biomedical Mg10.1016/j.corsci.2022.110230 ↗
58. Royal Institute of Technology, Chemical Equilibrium Diagrams, (2020) Sweden 〈https://www.kth.se/che/medusa/〉.
59. Formation mechanism of Ca-deficient hydroxyapatite coating on Mg–Zn–Ca alloy for orthopaedic implant10.1016/j.apsusc.2014.03.172 ↗
60. Nanointerface chemistry: lattice-mismatch-directed synthesis and application of hybrid nanocrystals10.1021/acs.chemrev.9b00443 ↗
61. Effect of additive oxides on ultrafine CeO2 particles synthesized by the spray-ICP technique10.1007/BF00278104 ↗
62. In-vivo assessment of minerals substituted hydroxyapatite / poly sorbitol sebacate glutamate (PSSG) composite coating on titanium metal implant for orthopedic implantation10.1016/j.biopha.2019.109404 ↗
63. Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticles10.1016/j.electacta.2009.01.053 ↗
64. Synergistic corrosion inhibition on galvanically coupled metallic materials10.1016/j.elecom.2012.04.007 ↗
65. Corrosion inhibition and acceleration by rare earth ions in galvanic couples10.1149/2.0761916jes ↗