Exploring the hydrogen embrittlement behavior in nickel-economized austenitic stainless steel: Investigating the role of manganese in modifying hydrogen-induced crack mechanisms
Source abstract
Abstract
The hydrogen embrittlement (HE) susceptibility in nickel-economized austenitic stainless steels (NEASSs) with varying manganese content was explored based on the statistical results of hydrogen-induced cracks (HICs) characterization after slow strain rate tensile (SSRT). With almost the same initial microstructure, manganese modifies the deformation patterns of NEASSs by adjusting stacking fault energy, which essentially influences the initiation and propagation mechanisms of HICs and eventually results in different brittle fracture modes. Additionally, different ways of HIC initiation and propagation caused significant differences in brittle-fracture areas and HICs lengths after SSRT tests, which resulted in great variations in HE susceptibility between NEASSs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Hydrogen-storage materials for mobile applications10.1038/35104634 ↗
2. A focused review of the hydrogen storage tank embrittlement mechanism process10.1016/j.ijhydene.2022.12.252 ↗
3. Complex hydrides for hydrogen storage - new perspectives10.1016/j.mattod.2014.02.013 ↗
4. Progress in Materials Science Material-based generation, storage, and utilisation of hydrogen10.1016/j.pmatsci.2023.101104 ↗
5. Hydrogen embrittlement in different materials: a review10.1016/j.ijhydene.2018.09.201 ↗
6. Hydrogen embrittlement characteristics in cold-drawn high-strength stainless steel wires10.1016/j.corsci.2023.111109 ↗
7. Ductility and fatigue properties of low nickel content type 316L austenitic stainless steel after gaseous thermal pre-charging with hydrogen10.1016/j.ijhydene.2019.08.233 ↗
8. Effects of Ni/Cu replacement on improvement of tensile and hydrogen-embrittlement properties in austenitic stainless steels10.1016/j.actamat.2022.118093 ↗
9. Review of Hydrogen Embrittlement in Metals: Hydrogen Diffusion, Hydrogen Characterization, Hydrogen Embrittlement Mechanism and Prevention10.1007/s40195-020-01039-7 ↗
10. Strain-induced twins and martensite: Effects on hydrogen embrittlement of selective laser melted (SLM) 316 L stainless steel10.1016/j.corsci.2022.110669 ↗
11. Influence of machining-induced martensite on hydrogen-assisted fracture of AISI type 304 austenitic stainless steel10.1016/j.ijhydene.2011.05.133 ↗
12. On a role of hydrogen-induced ε-martensite in embrittlement of stable austenitic steel10.1016/S1359-6462(03)00338-5 ↗
13. XPS fast depth profile of the native oxide layers on AISI 304, 316 and 430 commercial stainless steels and their evolution with time10.1016/j.elspec.2020.146970 ↗
14. Hydrogen environment embrittlement of austenitic stainless steels at low temperatures10.1016/j.ijhydene.2008.02.021 ↗
15. A thermodynamic approach for the development of austenitic steels with a high resistance to hydrogen gas embrittlement10.1016/j.ijhydene.2013.08.133 ↗
16. Hydrogen embrittlement behavior in interstitial Mn–N austenitic stainless steel10.1016/j.ijhydene.2022.08.211 ↗
17. Relationship between hydrogen embrittlement and Md30 temperature: Prediction of low-nickel austenitic stainless steel’s resistance10.1016/j.ijhydene.2019.07.179 ↗
18. Hydrogen embrittlement of Cr-Mn-N-austenitic stainless steels10.1016/j.ijhydene.2009.10.050 ↗
19. On the role of nitrogen on hydrogen environment embrittlement of high-interstitial austenitic CrMnC(N) steels10.1016/j.ijhydene.2019.10.109 ↗
20. Hydrogen environment embrittlement of stable austenitic steels10.1016/j.ijhydene.2012.08.071 ↗
21. The effects of replacing Ni with Mn on hydrogen embrittlement in Cr-Ni-Mn-N austenitic steels10.1016/j.corsci.2019.03.012 ↗
22. Study of hydrogen-induced delayed fracture in high-Mn TWIP/TRIP steels during in situ electrochemical hydrogen-charging: Role of microstructure and strain rate in crack initiation and propagation10.1016/j.corsci.2019.108191 ↗
23. Microstructure effect on hydrogen-induced cracking in TM210 maraging steel10.1016/j.msea.2013.07.097 ↗
24. Origin of deformation twins and their influence on hydrogen embrittlement in cold-rolled austenitic stainless steel10.1016/j.ijhydene.2021.04.045 ↗
25. Effects of α′ martensite and deformation twin on hydrogen-assisted fatigue crack growth in cold/warm-rolled type 304 stainless steel10.1016/j.ijhydene.2017.12.173 ↗
26. Statistical study on the effects of heterogeneous deformation and grain boundary character on hydrogen-induced crack initiation and propagation in twining-induced plasticity steels10.1016/j.corsci.2021.109796 ↗
27. Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging10.1016/j.actamat.2013.04.030 ↗
28. In-situ observation of hydrogen induced crack initiation in a nickel-based superalloy10.1016/j.scriptamat.2017.07.006 ↗
29. Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials10.1016/j.actamat.2018.12.014 ↗
30. Gaseous hydrogen embrittlement of a Ni-free austenitic stainless steel containing 1 mass% nitrogen: Effects of nitrogen-enhanced dislocation planarity10.1016/j.ijhydene.2020.02.014 ↗
31. Hydrogen embrittlement and hydrogen diffusion behavior in interstitial nitrogen-alloyed austenitic steel10.1016/j.ijhydene.2021.07.084 ↗
32. A novel 13Cr austenitic stainless steel with excellent mechanical properties and high hydrogen embrittlement resistance via heterostructure and TRIP effects10.1016/j.msea.2020.139835 ↗
33. Impact of chemical inhomogeneities on local material properties and hydrogen environment embrittlement in AISI 304L steels10.1016/j.ijhydene.2018.01.062 ↗
34. Effect of manganese content on the hydrogen embrittlement of twinning-induced plasticity (TWIP) steels under hydrogen charging and hydrogen environment10.1016/j.msea.2022.144289 ↗
35. Lean-alloyed austenitic stainless steel with high resistance against hydrogen environment embrittlement10.1016/j.msea.2011.06.049 ↗
36. Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging10.1016/j.actamat.2013.04.030 ↗
37. Crystal orientation effect on fretting fatigue induced geometrically necessary dislocation distribution in Ni-based single-crystal superalloys10.1016/j.actamat.2019.08.035 ↗
38. Quantitative evaluation of slip activity in polycrystalline α-titanium considering non-local interactions between crystal grains10.1016/j.ijplas.2019.12.001 ↗
39. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
40. Different effects of Ni and Mn on thermodynamic and mechanical stabilities in Cr-Ni-Mn austenitic steels10.1007/s11661-018-5042-0 ↗
41. Effect of nickel equivalent on hydrogen gas embrittlement of austenitic stainless steels based on type 316 at low temperatures10.1016/j.actamat.2008.03.022 ↗
42. Effect of alloying elements on hydrogen environment embrittlement of AISI type 304 austenitic stainless steel10.1016/j.ijhydene.2011.09.013 ↗
43. Thermodynamic calculation of the stacking fault energy in Fe-Cr-Mn-C-N steels10.1016/j.jallcom.2018.03.296 ↗
44. The difference in thermal and mechanical stabilities of austenite between carbon- and nitrogen-added metastable austenitic stainless steels10.1016/j.actamat.2014.10.041 ↗
45. Stacking fault energies in austenitic stainless steels10.1016/j.actamat.2016.03.042 ↗
46. Composition and grain size dependence of strain induced martensitic transformation in metastable austenitic stainless steels10.2355/tetsutohagane1955.63.5_772 ↗
47. Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel10.1007/s11661-006-0160-5 ↗
48. Transformation mechanism of α′-martensite in an austenitic Fe-Mn-C-N alloy10.1016/j.scriptamat.2007.05.003 ↗
49. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
50. The effect of cyanoaclyrate fuming used for detecting latent fingerprints on STR typing10.3408/jafst.14.85 ↗
51. A simultaneously improved strength and ductility on carbide free bainite steel via novel ausrolling and twinning process based on SFE controlling10.1016/j.msea.2021.142442 ↗
52. Deformation behavior and tensile properties of an austenitic Fe-24Mn-4Cr-0.5C high-manganese steel: Effect of grain size10.1016/j.msea.2018.10.107 ↗
53. On mechanical properties of novel high-Mn cryogenic steel in terms of SFE and microstructural evolution10.1016/j.msea.2019.02.093 ↗
54. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.08.072 ↗
55. Extraordinary ductility and strain hardening of Cr26Mn20Fe20Co20Ni14 TWIP high-entropy alloy by cooperative planar slipping and twinning10.1016/j.mtla.2019.100485 ↗
56. Effect of vanadium and rare earth microalloying on the hydrogen embrittlement susceptibility of a Fe-18Mn-0.6C TWIP steel studied using the linearly increasing stress test10.1016/j.corsci.2021.109440 ↗
57. Overview of hydrogen embrittlement in high-Mn steels10.1016/j.ijhydene.2017.02.214 ↗
58. Challenges associated with hydrogen storage systems due to the hydrogen embrittlement of high strength steels
59. Metastable austenite driven work-hardening behaviour in a TRIP-assisted dual phase steel10.1016/j.ijplas.2016.10.005 ↗
60. Ultrahigh strength in lightweight steel via avalanche multiplication of intermetallic phases and dislocation10.1016/j.actamat.2022.118436 ↗
61. The mechanism of dislocation multiplication during thermally induced γ ↔ ε transformations in the Fe-17Mn alloy10.1016/j.scriptamat.2022.115157 ↗
62. Application of atomic simulation for studying hydrogen embrittlement phenomena and mechanism in iron-based alloys10.1016/j.ijhydene.2022.04.119 ↗
63. Role of surface oxide layers in the hydrogen embrittlement of austenitic stainless steels: a TOF-SIMS study10.1016/j.actamat.2019.09.019 ↗
64. First-principles calculation of hydrogen adsorption and diffusion on Mn-doped Mg 2 Ni (010) surfaces10.1016/j.apsusc.2017.07.006 ↗
65. Hydrogen interaction with Mn-doped Zr2Fe (101) surface: a DFT study10.1016/j.ijhydene.2022.04.203 ↗
66. Carbon effect on hydrogen diffusivity and embrittlement in austenitic stainless steels10.1016/j.corsci.2020.109226 ↗
67. The advantage of grain refinement in the hydrogen embrittlement of Fe-18Mn-0.6C twinning-induced plasticity steel10.1016/j.corsci.2015.01.012 ↗
68. FE simulation of hydrogen diffusion in duplex stainless steel10.1016/j.ijhydene.2013.10.101 ↗
69. Role of GNDs in bending strength gain of multilayer deposition generated heterostructured bulk aluminum10.1016/j.matdes.2022.110769 ↗
70. Memory effects of transformation textures in steel and its prediction by the double Kurdjumov-Sachs relation10.1016/j.actamat.2013.01.015 ↗
71. Role of ɛ martensite in tensile properties and hydrogen degradation of high-Mn steels10.1016/j.msea.2011.11.039 ↗
72. Hydrogen transport by mobile dislocations in nickel base superalloy single crystals10.1016/S1359-6462(98)00451-5 ↗
73. Hydrogen transport by dislocations10.1007/BF02644079 ↗
74. Effect of strain-induced martensite on hydrogen embrittlement of austenitic stainless steels investigated by combined tension and hydrogen release methods10.1016/j.ijhydene.2013.01.198 ↗
75. Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile testing10.1016/j.scriptamat.2015.11.013 ↗
76. X-ray diffraction measurement of the stacking fault energy reduction induced by hydrogen in an AISI 304 steel10.1016/S1359-6462(97)00332-1 ↗
77. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
78. Mechanical twins, their development and growth10.1016/S0997-7538(03)00081-0 ↗
79. Hydrogen delayed fracture properties and internal hydrogen behavior of a Fe-18Mn-1.5AI-0.6C TWIP steel10.2355/isijinternational.49.1952 ↗
80. Effect of aluminium on hydrogen-induced fracture behaviour in austenitic Fe-Mn-C steel
81. Spatially and kinetically resolved mapping of hydrogen in a twinning-induced plasticity steel by use of scanning kelvin probe force microscopy10.1149/2.0131512jes ↗
82. Hydrogen embrittlement understood10.1007/s11663-015-0325-y ↗
83. Twinning behavior and hydrogen embrittlement of a pre-strained twinning-induced plasticity (TWIP) steel10.1016/j.corsci.2021.109791 ↗
84. Effect of Al content on the structural stability of Σ3 (111) twin boundary in Ti1-xAlxN hard coatings: A first-principles study10.1016/j.surfcoat.2022.128454 ↗
85. Is Hydrogen Diffusion along Grain Boundaries Fast or Slow? Atomistic Origin and Mechanistic Modeling10.1103/PhysRevLett.122.215501 ↗
86. Effect of hydrogen in advanced high strength steel materials10.1016/j.ijhydene.2019.08.149 ↗
87. Ductile fracture initiation and propagation modeling using damage plasticity theory10.1016/j.engfracmech.2007.08.012 ↗
88. Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging10.1016/j.actamat.2013.04.030 ↗
89. Slip transfer accelerates slip band cracking of high cycle fatigue in high-Mn austenitic steel at 77 K