Influence of chromium on the flow-accelerated corrosion behavior of low alloy steels in 3.5% NaCl solution
Source abstract
Abstract
Abstract The corrosion behavior of carbon steel and Cr-containing steels was investigated during flow-accelerated corrosion. The corresponding weight loss and electrochemical properties were determined by using a flow-loop apparatus and a rotating-cylinder apparatus, respectively. The corrosion rate of the Cr-containing steels is lower than that of the carbon steel. Furthermore, the high corrosion resistance of these steels was closely correlated with the properties of the rust layer formed on the steel surface. Cr leads mainly to inhibition of the cathodic reaction. Therefore, Cr is suitable for improving the corrosion resistance of low alloy steel to flow-accelerated corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effects of flow brass location, tube materials and temperature on corrosion of brass plumbing devices10.1016/j.corsci.2011.01.060 ↗
2. Impact of flow rate on corrosion of cast iron and quality of re-mineralized seawater reverse osmosis (SWRO) membrane product water10.1016/j.desal.2013.05.001 ↗
3. Influence of flow condition on the corrosion of AISI 304L stainless steel10.1016/S0043-1648(03)00562-3 ↗
4. On-line monitoring system development for single-phase flow accelerated corrosion10.1016/j.nucengdes.2006.09.006 ↗
5. Thin layer activation for probing flow accelerated corrosion of carbon steel10.1016/j.corsci.2011.08.044 ↗
6. Screening method for piping wall loss flow accelerated corrosion10.1016/j.nucengdes.2008.07.006 ↗
7. Effect of flow velocity and entrained sand on inhibition performances of two inhibitors for CO2 corrosion of N80 steel in 3%NaCl solution10.1016/j.corsci.2004.11.012 ↗
8. Erosion-corrosion of chromium steel in a rotating cylinder electrode system: some comments on particle size effects10.1016/S0043-1648(03)00565-9 ↗
9. Comparison of the rotating cylinder and pipe flow test for flow-sensitive carbon dioxide corrosion10.5006/1.3293555 ↗
10. Effect of fluid hydrodynamics on flow-assisted corrosion of aluminum alloy in ethylene glycol–water solution studied by a microelectrode technique10.1016/j.corsci.2009.06.005 ↗
11. Electrochemical characterization and CFD simulation of flow-assisted corrosion of aluminum alloy in ethylene glycol–water solution10.1016/j.corsci.2008.05.004 ↗
12. Erosion-corrosion of lean duplex stainless steels in 3.5%NaCl solution10.1016/j.wear.2012.12.007 ↗
13. Erosion enhanced corrosion and corrosion enhanced erosion of API X-70 pipeline steel10.1016/j.wear.2013.01.041 ↗
14. Influence of velocity on corrosion of copper in alkaline chloride solution10.5006/1.3294336 ↗
15. Erosion-corrosion resistance of engineering materials in various test conditions10.1016/j.wear.2009.01.052 ↗
16. Erosion-corrosion of stainless steel under impingement by a fluid jet10.1016/j.corsci.2006.05.012 ↗
17. Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel10.1016/S0043-1648(00)00344-6 ↗
18. Erosion-corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles10.1016/j.corsci.2006.08.023 ↗
19. Influence of microsreucture on the erosion and erosion-corrosion characteristics of 316 stainless steel10.1016/j.wear.2013.08.007 ↗
20. Erosion accelerated corrosion of a carbon steel-stainless steel galvanic couple in a chloride solusion10.1016/j.wear.2010.09.004 ↗
21. Erosion-corrosion and synergistic effects in disturbed liquid-particle flow10.1016/j.wear.2006.08.029 ↗
22. The corrosion of carbon steel in oil-in-water emulsions under controlled hydrodynamic condition10.1016/S0010-938X(99)00068-2 ↗
23. Correlation of steel corrosion in pipe flow with jet impingement and rotating cylinder tests10.5006/1.3316026 ↗
24. Chemo-mechanical effects of flow on corrosion10.5006/1.3585229 ↗
25. A direct measurement of wall shear stress in multiphase flow—is it an important parameter in CO2 corrosion of carbon steel pipelines?10.1016/j.corsci.2016.04.008 ↗
26. Development of controlled hydrodynamic techniques for corrosion testing10.5006/1.3315930 ↗
27. Electrochemical corrosion of X65 pipe steel in oil/water emulsion10.1016/j.corsci.2009.01.020 ↗
28. Electrochemical corrosion of X65 steel in the simulated oil sand slurry I: effects of hydrodynamic condition10.1016/j.corsci.2007.11.008 ↗
29. The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century10.1016/0010-938X(94)90158-9 ↗
30. Effect of Co and Ni on the corrosion behavior of low alloy steels in wet/dry environments10.1016/S0010-938X(00)00018-4 ↗
31. Structure and protective performance of atmospheric product of Fe-Cr alloy film analyzed by Mossbauer spectroscopy and with synchrotron radiation X-rays10.1016/S0010-938X(02)00093-8 ↗
32. Corrosion behavior of steel under wet and dry cycles containing Cr3+ ion10.1016/S0010-938X(03)00023-4 ↗
33. Observation and analysis of pseudopassive film of 6.5%Cr steel in CO2 corrosion environment10.1016/j.corsci.2016.06.006 ↗
34. Corrosion behavior of low-alloy steel containing 1% chromium in CO2 environments10.1016/j.corsci.2013.06.024 ↗
35. Essential criterion for evaluating the corrosion resistance of 3Cr steel in CO2 environments: prepassivation10.1016/j.corsci.2015.01.030 ↗
36. Corrosion of alloy steels containing 2% chromium in CO2 environments10.1016/j.corsci.2012.06.006 ↗
37. An investigation of phase transition in rust layers using Raman spectroscopy10.1016/0010-938X(89)90052-8 ↗
38. The nature of rust and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH10.1016/j.corsci.2011.11.012 ↗
39. Atmospheric corrosion of different steels in marine, rural and industrial environments10.1016/S0010-938X(99)00005-0 ↗
40. Natural Cati2O4-structured FeCr2O4 polymorph in the suizhou meteorite and its significance in mantle mineralogy10.1016/S0016-7037(03)00175-3 ↗
41. Chemical states in XPS and raman analysis during removal of Cr(VI) from contaminated water by mixed maghemite-magnetite nanopaticles10.1016/j.jhazmat.2012.07.054 ↗
42. FTIR, raman, and XPS analysis during phosphate, nitrate and Cr(VI) removal by amine cross-linking biosorbent10.1016/j.jcis.2016.01.079 ↗
43. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
44. Photoreduction of hexavalent chromium during X-ray photoelectron spectroscopy analysis of electrochemical and thermal films10.1149/1.2085340 ↗
45. In situ Möβbauer spectroscopic study of reactions within rust layers10.1016/0010-938X(89)90123-6 ↗
46. Advances in understanding atmospheric corrosion of iron. II. Mechanistic modelling of wet-dry cycles10.1016/j.corsci.2003.09.028 ↗