A comparison of the high-temperature oxidation behaviour of conventional wrought and laser beam melted Inconel 625
Source abstract
Abstract
Abstract The microstructure and oxidation resistance of Laser Beam Melted (LBM) and Conventionally Manufactured (CM) Inconel 625 alloys were studied at 900 °C and 1050 °C. The microstructure of the LBM samples was cellular, with Nb and Mo segregations located at the cell walls. At 900 °C, the oxidation rate was similar for both materials but was clearly higher for the LBM material at 1050 °C. This high oxidation rate induced poor oxide scale compactness, void formation in the subsurface region and the formation of a high amount of Nb1.5Cr0.5O4 at the alloy-oxide interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A history of superalloy metallurgy for superalloy metallurgists
2. A comparison of the precipitation kinetics of γ’’ particles in virgin and re-solutioned Alloy 625
3. Gu · 2015
4. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
5. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
6. Powder bed binder jet printed alloy 625: densification, microstructure and mechanical properties10.1016/j.matdes.2016.06.067 ↗
7. Investigating laser rapid manufacturing for Inconel-625 components10.1016/j.optlastec.2006.01.008 ↗
8. Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures10.1016/j.msea.2010.08.034 ↗
9. Selective laser melting of Inconel 625 using pulse shaping10.1108/13552541011049261 ↗
10. The mechanical and microstructural characteristics of laser-deposited IN71810.1016/j.jmatprotec.2005.05.005 ↗
11. Study on microstructure and mechanical properties of laser rapid forming Inconel 71810.1016/j.msea.2007.05.079 ↗
12. High temperature oxidation of IN 718 manufactured by laser beam melting and electron beam melting: effect of surface topography10.1016/j.corsci.2018.07.005 ↗
13. Microstructure, adhesion and growth kinetics of protective scales on metals and alloys10.1007/BF00656571 ↗
14. Selective laser melting additive manufactured Inconel 718 superalloy parts: high-temperature oxidation property and its mechanisms10.1016/j.optlastec.2014.03.008 ↗
15. Studies on the oxidation behavior of Inconel 625 between 873 and 1523 K10.1007/BF01046827 ↗
16. Mechanism and kinetics oxidation of Inconel 617 and 625 alloys
17. Rolland · 2012
18. Effect of gas flow rate on oxidation behaviour of alloy 625 in wet air in the temperature range 900–1000 °C10.1002/maco.201608831 ↗
19. High-temperature oxidation performance and its mechanism of TiC/Inconel 625 composites prepared by laser metal deposition additive manufacturing10.2351/1.4898647 ↗
20. Determination of parabolic rate constants from a local analysis of mass-gain curves10.1023/A:1018860909826 ↗
21. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming10.1016/j.jallcom.2018.07.087 ↗
22. Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder10.1016/j.apsusc.2007.08.046 ↗
23. Microstructure characteristics of Inconel 625 superalloy manufactured by selective laser melting
24. Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting10.1016/j.jallcom.2019.01.377 ↗
25. On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni–Nb alloys10.1088/1361-651X/aa7369 ↗
26. The effect of cooling rate on the solidification of INCONEL 71810.1007/s11663-005-0009-0 ↗
27. Effects of laser modes on Nb segregation and laves phase formation during laser additive manufacturing of nickel-based superalloy10.1016/j.matlet.2016.10.118 ↗
28. Young · 2008
29. Initial stages of oxidation of inconel 718 by FTIR spectroscopy10.1016/0025-5408(90)90199-C ↗
30. Sub-scale depletion and enrichment processes during high temperature oxidation of the nickel base alloy 625 in the temperature range 900–1000 °C10.1007/s11085-010-9225-3 ↗
31. A thermodynamic modeling of the Cr–Nb–Ni system10.1016/j.calphad.2005.06.001 ↗
32. Depletion and voids formation in the substrate during high temperature oxidation of Ni-Cr alloys10.1007/s11085-012-9328-0 ↗
33. Subsurface microstructural changes in a cast heat resisting alloy caused by high temperature corrosion10.1016/j.corsci.2009.09.014 ↗