Effect of pre-oxidation on hot corrosion resistance of HR3C stainless steel in sulfate salt with or without Fe2O3
Source abstract
Abstract
Abstract HR3C steel exhibits high oxidation resistance in air at 700 °C owing to the formation of a dense chromia scale. In the presence of sulfate salt deposition (Na2SO4:K2SO4 = 1:1), hot corrosion occurs. It leads to the dissolution and re-precipitation of Cr2O3 platelets and severe internal corrosion. Pre-oxidation can notably enhance corrosion resistance with almost no internal corrosion zone. When the deposited sulfate salt contains Fe2O3 (Na2SO4:K2SO4:Fe2O3 = 1:1:1), HR3C steel suffers even severer hot corrosion. Its scale spalls off easily and internal corrosion develops deep into the steel. Meanwhile, pre-oxidation played almost no positive effect on corrosion in sulfate salt containing Fe2O3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Clean coal technology development in China10.1016/j.enpol.2009.06.003 ↗
2. The fossil fuel power plants technology
3. Microstructure and long-term creep properties of 9–12% Cr steels10.1016/j.ijpvp.2007.06.010 ↗
4. Long-term creep deformation characteristics of advanced ferritic steels for USC power plants10.1016/j.ijpvp.2006.09.005 ↗
5. High-efficiency coal-fired power plants development and perspectives10.1016/j.energy.2005.05.025 ↗
6. U.S. program on materials technology for ultra-supercritical coal power plants10.1361/10599490524039 ↗
7. Materials for boilers operating under supercritical steam conditions
8. Investigation on high temperature corrosion characteristic of Super304H, TP347H, and HR3C steel in an ultra‐supercritical coal‐fired boiler10.1002/fuce.202000031 ↗
9. N. Komai, M. Igarashi, Y. Minami, H. Mimura, F. Masuyama, M. Prager, P.R. Boyles, Field test results of newly developed austenitic steels in the eddystone unit no.1 boiler, in : Proceedings of the. Vessel. Pip. Conf. Eighth Int. Conf. Creep Fatigue Elev. Temp. CREEP8, 2007 ASME Press, 2008.10.1115/CREEP2007-26760 ↗
10. Trends in fireside corrosion damage to superheaters in air and oxy-firing of coal/biomass10.1016/j.fuel.2013.04.005 ↗
11. Fireside corrosion behaviors of super304H and HR3C in coal ash/gas environment with different SO2 contents at 650 °C10.1007/s11665-017-3051-6 ↗
12. Influence of dissolved oxygen concentration and exposure temperature on the steam oxidation behaviour of HR3C10.1080/1478422X.2019.1611248 ↗
13. Effect of aging process on steam oxidation behaviour of austenitic steels Super 304H and HR3C10.1016/j.ijpvp.2021.104344 ↗
14. Environmental degradation of boiler components
15. Effect of SO2 in flue gas on coal ash hot corrosion of Inconel 740 alloy – a high temperature electrochemical sensor study10.1016/j.corsci.2013.07.012 ↗
16. Rates of fireside corrosion of superheater and reheater tubes: making sense of available data10.1179/1878641314Y.0000000030 ↗
17. New austenitic steels for the advanced USC power plants
18. Fireside corrosion of superheater materials in coal/biomass co-fired advanced power plants10.1007/s11085-013-9394-y ↗
19. Chemical and structural properties of the system Fe2O3-Cr2O310.1007/BF01151237 ↗
20. A theoretical investigation of alpha- Fe2O3-Cr2O3 solid solutions10.1039/B815907F ↗
21. Effects of silicon and water vapour on corrosion of Fe–20Cr and Fe–20Cr–20Ni alloys in CO2 at 650 °C10.1007/s11085-016-9681-5 ↗
22. Mechanochemical-molten salt synthesis of α-Al2O3 platelets10.1016/j.ceramint.2015.03.095 ↗
23. Size control of α-Al2O3 platelets synthesized in molten Na2SO4 flux10.1111/j.1551-2916.2004.00533.x ↗
24. Synthesis of α-alumina platelets from γ-alumina with and without microwaves10.1016/j.msea.2007.02.041 ↗
25. Growth habit of rutile and α-Al2O3 crystals10.1016/S0022-0248(99)00419-4 ↗
26. Effects of sulphate deposits on corrosion behaviour of Ni-base alloys in wet CO2 gas at 750 °C10.1016/j.corsci.2020.109227 ↗
27. Investigation into the failure mechanism of chromia scale thermally grown on an austenitic stainless steel in pure steam10.1016/j.corsci.2016.03.021 ↗
28. Hot corrosion behaviour of a Ni+CrAlYSiN composite coating in Na2SO4–25wt% NaCl melt10.1016/j.apsusc.2012.12.012 ↗
29. Hot corrosion behaviour of plasma sprayed YSZ/Al2O3 dispersed NiCrAlY coatings on Inconel-718 superalloy10.1016/j.surfcoat.2009.07.026 ↗
30. Impacts of applied stresses on high temperature corrosion behavior of HR3C in molten salt10.1007/s11085-014-9522-3 ↗
31. Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings10.1016/j.corsci.2017.12.033 ↗
32. Effects of chromate and vanadate anions on the hot corrosion of preoxidized Ni by a thin fused Na2SO4 film at 900 °C10.1149/1.2086437 ↗
33. Hot corrosion of materials: fundamental studies10.1007/BF03222665 ↗
34. Hot corrosion of materials: a fluxing mechanism10.1016/S0010-938X(01)00057-9 ↗
35. Chapter 8 - corrosion by sulphur
36. Thermodynamic analysis of phase diagrams of binary solid solutions of ascending and minimum types: Na2SO4-Ag2SO4, Ag2SO4-K2SO4, Na2SO4-K2SO410.1139/v89-223 ↗
37. Crystal chemistry of the system Na2SO4-K2SO4-K2CrO4-Na2CrO4 of the glaserite phase
38. Growth mechanism of Cr2O3 scales: oxygen and chromium diffusion, oxidation kinetics and effect of yttrium10.1016/0921-5093(96)10173-8 ↗
39. Understanding of failure mechanisms of the oxide scales formed on nanocrystalline coatings with different Al content during cyclic oxidation10.1016/j.actamat.2020.116576 ↗