journal article·2023-06

Formation of Fine‐Grain Rings on the Surface Region of the Extruded Mg–Gd–Y–Zr–Ag Rod

Dongdong Zhang, Chuming Liu, Shunong Jiang, Yonghao Gao, Yingchun Wan, Zhiyong Chen, Zongliang Zhang

Advanced Engineering Materials· Volume 25· Issue 11
Publisher page

Abstract

The cross‐sectional inhomogeneity of the extruded Mg–7.5Gd–1.5Y–0.4Zr–0.5Ag (wt%) is investigated by experimental and numerical methods. There is an interesting phenomenon in which a fine‐grain ring in the surface region of the extrusion rod is found. The microstructure of the fine‐grain ring consists of fully recrystallized equiaxed grains with an average grain size of 12.7 μm. In contrast, the bimodal microstructure with an average grain size of 18.9 μm is the main characteristic in the center region, and nonrecrystallized grains are elongated along the extrusion direction. The finite element analysis results demonstrate that compared with the center region, the surface region exhibits higher strain and stress during the extrusion process, which improves the degree of recrystallization and refines grains. Finally, the comprehensive mechanical properties of the surface region are better than those of the center region due to the positive role of the surface fine grains.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering Central South University Changsha 410083 China

Light Alloy Research Institute Central South University Changsha 410083 China

MMI Planning & Engineering Institute IX Co. Ltd. Changchun 130011 China

References (32)

Show source-provided references
1. Maldar A. · J. Magnes. Alloy. · 2021
2. 10.1016/j.msea.2022.14286710.1016/j.msea.2022.142867 ↗
3. 10.1080/14786435.2020.172525010.1080/14786435.2020.1725250 ↗
4. 10.1016/j.jallcom.2021.15982510.1016/j.jallcom.2021.159825 ↗
5. 10.1016/S1003-6326(21)65737-010.1016/S1003-6326(21)65737-0 ↗
6. 10.1016/j.actamat.2010.11.06410.1016/j.actamat.2010.11.064 ↗
7. 10.1007/s11661-020-05974-z10.1007/s11661-020-05974-z ↗
8. 10.1016/j.jma.2020.06.00110.1016/j.jma.2020.06.001 ↗
9. 10.1016/j.matpr.2017.12.10510.1016/j.matpr.2017.12.105 ↗
10. 10.1016/j.msea.2012.06.04210.1016/j.msea.2012.06.042 ↗
11. 10.1016/j.jmst.2019.11.03710.1016/j.jmst.2019.11.037 ↗
12. 10.1016/j.jallcom.2020.15491110.1016/j.jallcom.2020.154911 ↗
13. 10.1016/j.jallcom.2023.16919010.1016/j.jallcom.2023.169190 ↗
14. 10.1016/j.jma.2020.06.01910.1016/j.jma.2020.06.019 ↗
15. Pang H. · J. Mater. Res. · 2022 · 19 · 3877
16. 10.1016/j.actamat.2015.05.04410.1016/j.actamat.2015.05.044 ↗
17. 10.1016/j.jallcom.2022.16471610.1016/j.jallcom.2022.164716 ↗
18. 10.1016/j.matdes.2022.11082610.1016/j.matdes.2022.110826 ↗
19. 10.1016/j.jmst.2020.05.02110.1016/j.jmst.2020.05.021 ↗
20. 10.1016/j.jmst.2021.02.03610.1016/j.jmst.2021.02.036 ↗
21. 10.1016/j.jallcom.2022.16624410.1016/j.jallcom.2022.166244 ↗
22. 10.1016/j.actamat.2019.11.03410.1016/j.actamat.2019.11.034 ↗
23. Gao Z. X. · Adv. Eng. Mater. · 2022 · 2201046
24. 10.1016/j.msea.2022.14399010.1016/j.msea.2022.143990 ↗
25. Zhang Q. · J. Mater. Res. · 2021 · 15 · 37
26. 10.1016/j.matchar.2016.11.03610.1016/j.matchar.2016.11.036 ↗
27. Rollett A. · 2004
28. 10.1016/j.jma.2020.09.02310.1016/j.jma.2020.09.023 ↗
29. 10.1007/s11661-002-0093-610.1007/s11661-002-0093-6 ↗
30. 10.1016/j.scriptamat.2004.06.00210.1016/j.scriptamat.2004.06.002 ↗
31. 10.1016/j.msea.2022.14351410.1016/j.msea.2022.143514 ↗
32. 10.1016/j.jma.2019.07.01110.1016/j.jma.2019.07.011 ↗