Super‐High Strength Mg–7.5Al–0.8Zn Alloy Prepared by Rapidly Solidified Powder Metallurgy and Low Temperature Extrusion
Source abstract
Abstract
In this work, Mg–7.5Al–0.8Zn alloy with super‐high tensile strength are fabricated by rapidly solidified powder metallurgy (RS/PM) and low temperature extrusion technology. By reducing extrusion temperature from 340 to 170 °C, the α‐Mg grains are significantly refined and numerous nanoscale β‐Mg17Al12 particles are obtained. The RS/PM alloy extruded at 170 °C possesses the lowest grain size of ≈550 nm. The nanoscale β‐phase particles stimulate the nucleation of dynamically recrystallized (DRXed) grains and restrain the growth of DRXed grains. The RS/PM alloy extruded at 170 °C exhibits mechanical properties with a tensile yield strength of 448 MPa, an ultimate tensile strength of 480 Mpa, and a microhardness of 137 HV. These excellent mechanical properties result from low temperature extrusion are mainly attributed to the ultra‐fine DRXed grains and the high‐density dislocations and subgrains.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing Beijing 100083 China
Department of ENT, Peking University Third Hospital Beijing 10191 China
School of Materials Science and Engineering, Northwestern Polytechnical University Xian 710072 China
Department of Materials Science and Engineering, The Pennsylvania State University, University Park PA 16802 USA
Funding
National Natural Science Foundation of China
References (36)
Show source-provided references
1. 10.1016/j.jma.2013.02.00210.1016/j.jma.2013.02.002 ↗
2. 10.1007/s00170-007-1279-210.1007/s00170-007-1279-2 ↗
3. 10.1016/j.actamat.2012.10.04410.1016/j.actamat.2012.10.044 ↗
4. 10.1016/j.jmatprotec.2007.04.04510.1016/j.jmatprotec.2007.04.045 ↗
5. 10.1016/j.matlet.2013.02.05210.1016/j.matlet.2013.02.052 ↗
6. 10.1016/j.msea.2016.10.07110.1016/j.msea.2016.10.071 ↗
7. 10.1016/j.matdes.2015.09.10710.1016/j.matdes.2015.09.107 ↗
8. 10.1016/j.matdes.2014.02.06410.1016/j.matdes.2014.02.064 ↗
9. 10.1016/j.matdes.2009.04.02310.1016/j.matdes.2009.04.023 ↗
10. 10.1016/j.scriptamat.2007.04.00710.1016/j.scriptamat.2007.04.007 ↗
11. 10.1016/j.msea.2015.10.09410.1016/j.msea.2015.10.094 ↗
12. 10.1016/j.scriptamat.2009.01.01210.1016/j.scriptamat.2009.01.012 ↗
13. 10.1016/j.jallcom.2017.02.01210.1016/j.jallcom.2017.02.012 ↗
14. 10.1016/j.actamat.2010.09.03110.1016/j.actamat.2010.09.031 ↗
15. 10.2320/matertrans.42.117210.2320/matertrans.42.1172 ↗
16. 10.1016/j.jmst.2016.09.01910.1016/j.jmst.2016.09.019 ↗
17. 10.1016/j.jallcom.2012.10.10810.1016/j.jallcom.2012.10.108 ↗
18. 10.1016/S1359-6462(98)00122-510.1016/S1359-6462(98)00122-5 ↗
19. 10.1016/j.actamat.2016.05.00110.1016/j.actamat.2016.05.001 ↗
20. 10.1016/j.matlet.2008.05.04510.1016/j.matlet.2008.05.045 ↗
21. 10.1016/j.msea.2016.07.10710.1016/j.msea.2016.07.107 ↗
22. 10.1016/j.msea.2007.02.02910.1016/j.msea.2007.02.029 ↗
23. 10.1016/j.msea.2016.01.02310.1016/j.msea.2016.01.023 ↗
24. 10.1016/j.matdes.2015.06.04110.1016/j.matdes.2015.06.041 ↗
25. 10.1016/j.jallcom.2007.02.04510.1016/j.jallcom.2007.02.045 ↗
26. 10.1016/j.scriptamat.2008.07.00710.1016/j.scriptamat.2008.07.007 ↗
27. 10.1016/j.powtec.2011.05.00610.1016/j.powtec.2011.05.006 ↗
28. Avedesian M. M. · 1999
29. 10.1016/j.msea.2016.10.09410.1016/j.msea.2016.10.094 ↗
30. 10.1016/j.msea.2015.03.11210.1016/j.msea.2015.03.112 ↗
31. 10.1016/j.jallcom.2016.09.22010.1016/j.jallcom.2016.09.220 ↗
32. 10.1016/j.matdes.2015.09.15310.1016/j.matdes.2015.09.153 ↗
33. 10.1016/j.scriptamat.2008.11.02410.1016/j.scriptamat.2008.11.024 ↗
34. 10.1016/j.msea.2012.03.03610.1016/j.msea.2012.03.036 ↗
35. 10.1016/j.msea.2007.09.06910.1016/j.msea.2007.09.069 ↗
36. 10.1016/j.actamat.2014.08.02310.1016/j.actamat.2014.08.023 ↗