Oxidation protection of C/C composites with in situ bamboo-shaped SiC nanowire-toughened Si–Cr coating
Source abstract
Abstract
Abstract An in situ bamboo-shaped SiC nanowire-toughened Si–Cr coating was prepared on the carbon/carbon composites by pack cementation and heat treatment with ferrocene as the catalyst. The microstructures and oxidation behavior of the coating were investigated. Results showed that the coating had a dense microstructure, without the penetrating microcracks, which was primarily attributed to the unusual toughening effect of the bamboo-shaped nanowires resulting from the mechanical interlocking between the nodes and the matrix. The coating exhibited good oxidation protection ability at high temperature. The weight gain of the samples was 0.79% after isothermal oxidation at 1500 °C for 185 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Oxidation protection of carbon-carbon composites using chemical vapour deposition and glaze technology10.1016/0010-938X(93)90344-G ↗
2. Influence of SiC nanowires on the properties of SiC coating for C/C composites between room temperature and 1500°C10.1016/j.corsci.2011.05.046 ↗
3. SiC/SiC–YAG–YSZ oxidation protective coatings for carbon/carbon composites10.1016/j.corsci.2013.01.013 ↗
4. Oxidation and erosion resistance of MoSi2–CrSi2–Si/SiC-coated C/C composites in static and aerodynamic oxidation environment10.1016/j.carbon.2010.01.005 ↗
5. Si–W–Mo coating for SiC coated carbon/carbon composites against oxidation10.1016/j.surfcoat.2007.04.062 ↗
6. Oxidation protection of SiC-coated C/C composites by SiC nanowire-toughened CrSi2–SiC–Si coating10.1016/j.corsci.2011.11.001 ↗
7. Oxidation protection of C/C composites with a multilayer coating of SiC and Si+SiC+SiC nanowires10.1016/j.carbon.2011.10.048 ↗
8. Bamboo-shaped SiC nanowire-toughened SiC coating for oxidation protection of C/C composites10.1016/j.corsci.2012.12.009 ↗
9. Oxidation protection and behavior of C/C composites with an in situ SiC nanowire-SiC–Si/SiC–Si coating10.1016/j.corsci.2012.11.039 ↗
10. Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites10.1016/j.carbon.2005.02.025 ↗
11. Thermal expansion of the cubic (3C) polytype of SiC10.1007/BF01106557 ↗
12. Controlled Al-doped single-crystalline 6H–SiC10.1021/cg701227n ↗
13. B/SiOx nanonecklace reinforced nanocomposites by unique mechanical interlocking mechanism10.1002/adma.200801549 ↗
14. Toughening by SiC nanowires in a dense SiC–Si ceramic coating for oxidation protection of C/C composites10.1111/j.1551-2916.2012.05412.x ↗
15. SiC nanowire-toughened SiC–MoSi2–CrSi2 oxidation protective coating for carbon/carbon composites10.1016/j.surfcoat.2010.07.001 ↗
16. Effect of SiC nanowires on the mechanical and oxidation protective ability of SiC coating for C/C composites10.1111/j.1551-2916.2012.05412.x ↗