journal article·2014-11

Formation of amorphous oxide in Al82Ni13Zr5 and Al88Ni7Ca5 alloys

Kang Cheol Kim, Ka Ram Lim, Sung Hyun Park, Min Young Na, Won Tae Kim, Do Hyang Kim

Corrosion Science· Volume 88
Publisher page

Abstract

Formation and thermal stability of amorphous oxide in Al82Ni13Zr5 and Al88Ni7Ca5 alloys during holding at 873 K have been investigated. The thickness of amorphous oxide layer upon heating up to 873 K is ∼8 nm in Al82Ni13Zr5, while ∼15 nm in Al88Ni7Ca5. After exposure for 15 h, the amorphous oxide still remains in Al88Ni7Ca5, indicating that the thermal stability of the amorphous oxide in Al88Ni7Ca5 is higher than that in Al82Ni13Zr5. Such a phenomenon is discussed from the points of view of structural stability and oxygen ion mobility in the crystalline and amorphous oxide phases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Bulk metallic glass nanowire architecture for electrochemical applications10.1021/nn200033c ↗
2. Capillary flow of amorphous metal for high performance electrode
3. Oxidation induced amorphous stabilization of the subsurface region in Zr–Cu metallic glass10.1063/1.4862025 ↗
4. Corrosion behaviors of coatings fabricated using bulk metallic glass powders with the composition of Fe68.5C7.1Si3.3B5.5P8.7Cr2.3Mo2.5Al2.010.1007/s12540-012-4006-y ↗
5. Effects of electrolyte ph on the electrochemical behavior of Fe-based bulk metallic glass10.1007/s12540-012-5007-6 ↗
6. Exploiting metallic glasses for 19.6% efficient back contact solar cell10.1063/1.4742324 ↗
7. Novel thermoplastic bonding using a bulk metallic glass solder10.1016/j.scriptamat.2008.06.055 ↗
8. Enhancement of oxidation resistance of the supercooled liquid in Cu–Zr-based metallic glass by forming an amorphous oxide layer with high thermal stability10.1016/j.corsci.2012.09.018 ↗
9. Effect of thermal stability of the amorphous substrate on the amorphous oxide growth on Zr–Al–(Cu, Ni) metallic glass surfaces10.1016/j.corsci.2013.04.009 ↗
10. Thermal stability of amorphous oxide in Al87Ni3Y10 metallic glass10.1016/j.corsci.2013.08.010 ↗
11. Amorphous versus crystalline state for ultrathin Al2O3 overgrowths on Al substrates10.1063/1.2913505 ↗
12. Enhance the thermal stability and glass forming ability of Al-based metallic glass by Ca minor-alloying10.1016/j.intermet.2012.04.009 ↗
13. Reduced electronegativity difference as a factor leading to the formation of Al-based glassy alloys with a large supercooled liquid region of 50 K10.1063/1.2159420 ↗
14. The thermodynamic stability of amorphous oxide overgrowths on metals10.1016/j.actamat.2007.10.023 ↗
15. Growth kinetics and mechanisms of aluminum-oxide films formed by thermal oxidation of aluminum10.1063/1.1491591 ↗
16. Fundamental condition of glass formation10.1111/j.1151-2916.1947.tb19654.x ↗
17. Glass formation and thermal properties of low-silica calcium aluminosilicate glasses10.1016/0022-3093(90)90821-3 ↗