journal article·2020-01Open access

Microstructure and Failure Characteristics of Nanostructured Molybdenum–Copper Composites

Katharina T. Schwarz, Julian M. Rosalie, Stefan Wurster, Reinhard Pippan, Anton Hohenwarter

Advanced Engineering Materials· Volume 22· Issue 1

Abstract

Liquid‐metal infiltrated Cu30Mo70 (wt%) is subjected to severe plastic deformation using high‐pressure torsion. The initially equiaxed dual‐phase structure is gradually transformed into a lamellar structure composed of individual Cu and Mo layers. The thickness of the lamellae varies between the micro‐ and nanometer ranges depending on the amount of applied strain. Consistent with the refinement of the microstructural features, strength and hardness substantially increase. In addition, an acceptable ductility is found in the intermediate deformation range. An assessment of the damage tolerance of the produced composites is performed by measuring the fracture toughness in different crack propagation directions. The results indicate the development of a pronounced anisotropy with increasing degree of deformation which is an effect of the concurrent alignment of the nanostructured lamellar composite into the shear plane.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Erich Schmid Institute of Materials Science Austrian Academy of Sciences Jahnstraße 12 Leoben 8700 Austria

Department of Materials Science, Chair of Materials Physics Montanuniversität Leoben Jahnstraße 12 Leoben 8700 Austria

Funding

H2020 European Research Council

References (37)

Show source-provided references
1. 10.1016/S0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
2. 10.1016/j.actamat.2013.08.01810.1016/j.actamat.2013.08.018 ↗
3. 10.1080/21663831.2015.106054310.1080/21663831.2015.1060543 ↗
4. 10.1016/j.actamat.2012.10.03810.1016/j.actamat.2012.10.038 ↗
5. 10.1016/j.msea.2004.04.02110.1016/j.msea.2004.04.021 ↗
6. 10.1007/s10853-010-4381-z10.1007/s10853-010-4381-z ↗
7. 10.1016/j.msea.2016.04.00810.1016/j.msea.2016.04.008 ↗
8. 10.3139/146.10142210.3139/146.101422 ↗
9. 10.1016/j.jnucmat.2007.03.07910.1016/j.jnucmat.2007.03.079 ↗
10. 10.1126/science.115608410.1126/science.1156084 ↗
11. 10.1016/j.actamat.2010.12.04310.1016/j.actamat.2010.12.043 ↗
12. 10.1016/j.msea.2015.02.06610.1016/j.msea.2015.02.066 ↗
13. 10.1016/j.msea.2017.09.01010.1016/j.msea.2017.09.010 ↗
14. 10.1016/j.msea.2017.12.10610.1016/j.msea.2017.12.106 ↗
15. 10.1088/1742-6596/1134/1/01204910.1088/1742-6596/1134/1/012049 ↗
16. 10.1038/srep3322810.1038/srep33228 ↗
17. 10.1007/s10853-010-4635-910.1007/s10853-010-4635-9 ↗
18. 10.1080/21663831.2016.116640310.1080/21663831.2016.1166403 ↗
19. 10.1016/j.matchemphys.2011.03.04710.1016/j.matchemphys.2011.03.047 ↗
20. 10.1016/j.jallcom.2015.06.12910.1016/j.jallcom.2015.06.129 ↗
21. 10.1007/s11661-001-0077-y10.1007/s11661-001-0077-y ↗
22. 10.1016/j.msea.2007.02.01710.1016/j.msea.2007.02.017 ↗
23. 10.1007/s12598-012-0522-710.1007/s12598-012-0522-7 ↗
24. 10.1016/j.ijrmhm.2013.08.01210.1016/j.ijrmhm.2013.08.012 ↗
25. 10.1007/s10853-017-1142-210.1007/s10853-017-1142-2 ↗
26. 10.1016/j.msea.2012.01.08910.1016/j.msea.2012.01.089 ↗
27. 10.1098/rsta.2014.036610.1098/rsta.2014.0366 ↗
28. ASTM E399-90 · 2001
29. ASTM-standard E1820-08 · 2008
30. 10.1520/JTE2012017510.1520/JTE20120175 ↗
31. 10.1016/j.actamat.2011.07.04610.1016/j.actamat.2011.07.046 ↗
32. 10.3139/146.11022410.3139/146.110224 ↗
33. 10.1007/BF0001261910.1007/BF00012619 ↗
34. Rao K. T. V. · Metall. Trans. A · 1989 · 20 · 485
35. Hertzberg R. W. · 1996
36. 10.1016/j.scriptamat.2017.08.02510.1016/j.scriptamat.2017.08.025 ↗
37. 10.1016/j.msea.2017.07.06210.1016/j.msea.2017.07.062 ↗