MoSi₂/Al₂O₃/Feldspar Composites for Injection‐Molded Ceramic Heating Elements

MoSi₂ is an electrically conductive material with numerous applications mostly in high‐temperature environments. Herein, the production of MoSi₂‐containing resistive heating elements by ceramic injection molding (CIM) is described. The sintered parts consist of MoSi₂ particles embedded in a matrix of vitrified feldspar and Al₂O₃. The conductivity of sintered parts can be tuned precisely by varying the content of the conductive phase. For the development of the injection‐molding feedstock, four binder systems are evaluated. The corresponding feedstocks are injection molded into different geometries in traditional molds as well as in additively manufactured, soluble molds. For each feedstock, a debinding and sintering routine is elaborated based on thermogravimetric measurements. Higher debinding temperature leads to more oxidation of MoSi₂ and less conductive samples. Therefore, the conductivity as well as density of sintered parts is used to evaluate the applicability of the feedstocks. Finally, glow tests prove that MoSi₂/Al₂O₃/feldspar composite parts can be used as heating elements and by combining infrared temperature measurement data with computational simulations important material data such as thermal and electrical conductivity and thermal capacity can be obtained reliably.