Ex Situ Residual Stress Analysis of Chemical Vapor Deposited Diamond Coated Cutting Tools by Synchrotron X‐Ray Diffraction in Transmission Geometry
Source abstract
Abstract
When machining difficult‐to‐cut, nonferrous materials, chemical vapor deposited (CVD) diamond–coated cutting tools are applied. The tools’ favorable mechanical property profile is based on the hardness of the coating as well as the adaptability of the substrate. Nevertheless, the reproducibility of machining results and process stability are limited by insufficient coating adhesion. The resulting cutting tool failure is based on coating delamination initiated by crack development. By assessing residual stress as an influence of coating adhesion, an analysis of CVD diamond–coated tools is performed using synchrotron X‐ray diffraction in transmission geometry. Investigation of a nanocrystalline and multilayer morphology on cobalt‐based tungsten carbide (WC‐Co) and a silicon nitride–based ceramic (Si3N4) provides the distribution of the principal in‐plane residual stress tensor component σ22 depending on the coating morphology and substrate material. Contrary to microcrystalline CVD diamond, nanocrystalline layers decrease the compressive residual stress. In addition, the CVD diamond coating deposited on the Si3N4 substrate material tends to induce an overall initial tensile residual stress that leads to increased tool performance compared to WC‐Co‐based coated tools. Variation of the coating morphology as well as the substrate material offers the possibility to extend the current model for residual stress–dependent tool failure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Machine Tools and Factory Management (IWF) Technische Universität Berlin Pascalstr. 8-9 10587 Berlin Germany
Institute for Materials Science and Technology Metallic Materials Technische Universität Berlin Ernst-Reuter-Platz 1 10587 Berlin Germany
Department of Production Systems Fraunhofer Institute for Production Systems and Design Technology (IPK) Pascalstr. 8-9 10587 Berlin Germany
Funding
Deutsche Forschungsgemeinschaft
References (59)
Show source-provided references
1. Uhlmann E. · J. Mach. Eng. · 2020 · 20 · 2
2. 10.1016/j.cirp.2018.05.00510.1016/j.cirp.2018.05.005 ↗
3. Yan G. · Res. Phys. · 2019 · 13
4. F.Sammler Doctoral Thesis Technische Universität Berlin 2015.
5. 10.1016/B978-0-12-813248-7.00006-710.1016/B978-0-12-813248-7.00006-7 ↗
6. Gaydaychuk A. · Surf. Coat. Technol. · 2018 · 357 · 15
7. 10.1016/j.procir.2020.02.08910.1016/j.procir.2020.02.089 ↗
8. 10.1016/j.ijrmhm.2018.12.00410.1016/j.ijrmhm.2018.12.004 ↗
9. 10.1007/978-3-662-54207-110.1007/978-3-662-54207-1 ↗
10. 10.1016/j.surfcoat.2018.12.06110.1016/j.surfcoat.2018.12.061 ↗
11. He Y. · Surf. Rev. Lett. · 2019 · 26 · 9
12. Uhlmann E. · WT Online · 2019 · 109 · 11/12
13. Hinzmann D. · WT Online · 2019 · 109 · 7/8
14. 10.1016/j.tsf.2015.07.02210.1016/j.tsf.2015.07.022 ↗
15. M.Wacinski Doctoral Thesis Technical University Berlin 2015.
16. Silva F. G. · J. Nanosci. Nanotechnol. · 2019 · 9 · 6
17. 10.1016/j.cirp.2019.04.05610.1016/j.cirp.2019.04.056 ↗
18. 10.1063/1.489672910.1063/1.4896729 ↗
19. Zhang J. · Appl. Sci. · 2018 · 8 · 9
20. 10.1016/j.apsusc.2013.11.03510.1016/j.apsusc.2013.11.035 ↗
21. 10.1016/j.ijrmhm.2014.07.02310.1016/j.ijrmhm.2014.07.023 ↗
22. Xu Y. · Surf. Rev. Lett. · 2017 · 24 · 2
23. 10.24874/ti.2017.39.01.0310.24874/ti.2017.39.01.03 ↗
24. da Silva Neto J. V. · Braz. J. Vac. Appl. · 2016 · 35 · 1
25. 10.1142/S021798491850236610.1142/S0217984918502366 ↗
26. E.Ashkinazi V.Ralchenko V.Konov D.Vinogradov A.Martyanov V.Sedov D.Sovyk R.Khmelnitskii S.Fedorov M.Volosova in2020 7th International Congress on Energy Fluxes and Radiation Effects (EFRE) IEEE Piscataway NJ2020.
27. 10.1007/s11740-014-0580-910.1007/s11740-014-0580-9 ↗
28. 10.1016/j.cirp.2016.04.00710.1016/j.cirp.2016.04.007 ↗
29. 10.1103/PhysRevB.48.260110.1103/PhysRevB.48.2601 ↗
30. 10.1063/1.34870110.1063/1.348701 ↗
31. 10.1016/j.diamond.2016.12.00810.1016/j.diamond.2016.12.008 ↗
32. Marins R. L. · J. Vac. Sci. Technol. · 2020 · 39 · 1
33. Shabani M. · Coat · 2017 · 165 · 99
34. 10.3390/coatings710016510.3390/coatings7100165 ↗
35. 10.1016/j.diamond.2016.12.00110.1016/j.diamond.2016.12.001 ↗
36. Karawitz A. · Int. J. Refract. Met. Hard Mater. · 2015 · 49 · 47
37. 10.1016/j.ijrmhm.2016.04.00110.1016/j.ijrmhm.2016.04.001 ↗
38. Bobzin K. · CIRP J. Sci. Technol. · 2017 · 18 · 55
39. 10.1016/j.jmapro.2014.06.00110.1016/j.jmapro.2014.06.001 ↗
40. 10.1016/j.compositesa.2019.10555210.1016/j.compositesa.2019.105552 ↗
41. 10.1016/j.compositesa.2019.10555210.1016/j.compositesa.2019.105552 ↗
42. 10.1016/j.compstruct.2019.11144110.1016/j.compstruct.2019.111441 ↗
43. 10.1115/1.402652610.1115/1.4026526 ↗
44. 10.1016/j.ijmachtools.2015.04.00610.1016/j.ijmachtools.2015.04.006 ↗
45. Karataş M. A. · Def. Technol. · 2018 · 14
46. F.Brügmann Doctoral Thesis Technische Universität Hamburg 2018.
47. 10.1016/j.diamond.2014.09.01010.1016/j.diamond.2014.09.010 ↗
48. 10.1016/j.diamond.2015.09.00810.1016/j.diamond.2015.09.008 ↗
49. Celik A. · Wear · 2015 · 238
50. Uhlmann E. · Proc. Manuf. · 2016 · 6
51. 10.1016/j.wear.2020.20319110.1016/j.wear.2020.203191 ↗
52. 10.1016/j.jmatprotec.2015.03.04010.1016/j.jmatprotec.2015.03.040 ↗
53. Sun J. · Ceram. Int. · 2020 · 46 · 2
54. Uhlmann E. · Prod. Eng. · 2014 · 9
55. 10.1016/j.scriptamat.2012.07.03410.1016/j.scriptamat.2012.07.034 ↗
56. 10.1107/S002188981301953510.1107/S0021889813019535 ↗
57. 10.1016/S0040-6090(02)01287-710.1016/S0040-6090(02)01287-7 ↗
58. International Organization for Standardization · 2018
59. International Organization for Standardization · 2009