Techniques for investigation of hydrogen embrittlement of advanced high strength steels
Source abstract
Abstract
Abstract Production volumes of advanced high strength steels (AHSS) are growing rapidly due to material and energy savings they provide in a number of application areas. In order to use their potential fully, it is necessary to minimize any danger of unexpected failures caused by hydrogen embrittlement. It is possible only if deeper understanding of underlying mechanisms is obtained through further research. Besides description of main grades of AHSS and mechanisms of HE, this paper reviews available tools for determination of hydrogen content and susceptibility to HE focusing on atmospheric conditions. Techniques such as slow strain rate testing, constant load testing, electrochemical permeation technique, scanning Kelvin probe and scanning Kelvin probe force microscopy have already been used to study the effect of hydrogen entered under atmospheric exposure conditions. Nanoindentation, hydrogen microprint technique, thermal desorption spectroscopy, Ag decoration or secondary ion mass spectrometry can be also conducted after atmospheric exposure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metal Construction Materials, University of Chemistry and Technology Prague, Technopark Kralupy , Žižkova 7 , 27801 Kralupy nad Vltavou , Czech Republic
University of Chemistry and Technology Prague, Technopark Kralupy , Žižkova 7 , 27801 Kralupy nad Vltavou , Czech Republic
voestalpine Stahl GmbH , voestalpine-Straße 3 , 4020 Linz , Austria
References (100+)
Show source-provided references
1. Akiyama E, Matsuoka S. Hydrogen visualization in steels using Ag decoration method. Mater Trans 2015; 56: 793–797.10.2320/matertrans.M2014431 ↗
2. Akiyama E, Matsukado K, Wang MQ, Tsuzaki K. Evaluation of hydrogen entry into high strength steel under atmospheric corrosion. Corros Sci 2010; 52: 2758–2765.10.1016/j.corsci.2009.11.046 ↗
3. Akiyama E, Li SJ, Shinohara T, Zhang ZG, Tsuzaki K. Hydrogen entry into Fe and high strength steels under simulated atmospheric corrosion. Electrochim Acta 2011a; 56: 1799–1805.10.1016/j.electacta.2010.09.043 ↗
4. Akiyama E, Matsukado K, Li SJ, Tsuzaki K. Constant-load delayed fracture test of atmospherically corroded high strength steels. Appl Surf Sci 2011b; 257: 8275–8281.10.1016/j.apsusc.2011.03.037 ↗
5. Akiyama E, Wang M, Li S, Zhang Z, Kimuro Y, Uno N, Tsuzaki K. Studies of evaluation of hydrogen embrittlement property of high strength steels with consideration of the effect of atmospheric corrosion. Metall Mater Trans A 2013; 44A: 1290–1300.10.1007/s11661-012-1403-2 ↗
6. Aksoy M, Esin A. Improving the mechanical properties of structural carbon steel by dual-phase heat treatment. J Mater Eng 1988; 10: 281–287.10.1007/BF02834157 ↗
7. Aoki M, Saito H, Mori M, Ishida Y, Nagumo M. Deformation microstructures of a low carbon steel characterized by tritium autoradiography and thermal desorption spectroscopy. J Jpn I Met 1994; 58: 1141–1148.10.2320/jinstmet1952.58.10_1141 ↗
8. Ariza EA, Nishikawa AS, Goldenstein H, Tschiptschin AP. Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P). Mater Sci Eng A 2016; 671: 54–69.10.1016/j.msea.2016.06.038 ↗
9. Awane T, Fukushima Y, Matsuo T, Murakami Y, Miwa S. Highly sensitive secondary ion mass spectrometric analysis of time variation of hydrogen spatial distribution in austenitic stainless steel at room temperature in vacuum. Int J Hydrogen Energ 2014; 39: 1164–1172.10.1016/j.ijhydene.2013.10.116 ↗
10. Bag A, Ray KK, Dwarakadasa ES. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels. Metall Mater Trans A 1999; 30: 1193–1202.10.1007/s11661-999-0269-4 ↗
11. Barnoush A, Vehoff H. Recent developments in the study of hydrogen embrittlement: hydrogen effect on dislocation nucleation. Acta Mater 2010; 58: 5274–5285.10.1016/j.actamat.2010.05.057 ↗
12. Barnoush A, Asgari M, Johnsen R. Resolving the hydrogen effect on dislocation nucleation and mobility by electrochemical nanoindentation. Scripta Mater 2012; 66: 414–417.10.1016/j.scriptamat.2011.12.004 ↗
13. Beachem CD. A new model for hydrogen-assisted cracking (hydrogen embrittlement). Metall Trans 1972; 3: 441–455.10.1007/BF02642048 ↗
14. Bellavoine M, Dumont M, Drillet J, Maugis P, Hebert V. Influence of microalloying elements Ti and Nb on recrystallization during annealing of advanced high-strength steels. Mater Sci Forum 2017; 879: 217–223.10.4028/www.scientific.net/MSF.879.217 ↗
15. Bhattacharyya T, Singh SB, Das S, Haldar A, Bhattacharjee D. Development and characterisation of C-Mn-Al-Si-Nb TRIP aided steel. Mater Sci Eng A 2011; 528: 2394–2400.10.1016/j.msea.2010.11.054 ↗
16. Birnbaum HK, Sofronis P. Hydrogen-enhanced localized plasticity – a mechanism for hydrogen-related fracture. Mater Sci Eng A 1994; 176: 191–202.10.1016/0921-5093(94)90975-X ↗
17. Brass AM, Chene J, Boutry-Forveille A. Measurements of deuterium and tritium concentration enhancement at the crack tip of high strength steels. Corros Sci 1996; 38: 569–585.10.1016/0010-938X(95)00146-B ↗
18. Casanova T, Soto F, Eyraud M, Crousier J. Hydrogen absorption during zinc plating on steel. Corros Sci 1997; 39: 529–537.10.1016/S0010-938X(97)86101-X ↗
19. Charles Y, Nguyen HT, Gaspérini M. FE simulation of the influence of plastic strain on hydrogen distribution during an U-bend test. Int J Mech Sci 2017; 120: 214–224.10.1016/j.ijmecsci.2016.11.017 ↗
20. Chida T, Hagihara Y, Akiyama E, Iwanaga K, Takagi S, Hayakawa M, Ohishi H, Hirakami D, Tarui T. Comparison of constant load, SSRT and CSRT methods for hydrogen embrittlement evaluation using round bar specimens of high strength steels. ISIJ Int 2016; 56: 1268–1275.10.2355/isijinternational.ISIJINT-2015-565 ↗
21. Cook AB, Barrett Z, Lyon SB, McMurray HN, Walton J, Williams G. Calibration of the scanning Kelvin probe force microscope under controlled environmental conditions. Electrochim Acta 2012; 66: 100–105.10.1016/j.electacta.2012.01.054 ↗
22. Cottis RA. Hydrogen embrittlement. In: Richardson T, editor. Shreir’s corrosion. Amsterdam, Netherlands: Elsevier Science, 2010: 902–922.10.1016/B978-044452787-5.00200-6 ↗
23. Dabah E, Kannengießer T, Eliezer D, Böllinghaus T. Hydrogen interaction with residual stresses in steel studied by synchrotron X-ray diffraction. Mater Sci Forum 2014; 772: 91–95.10.4028/www.scientific.net/MSF.772.91 ↗
24. da Silva JF, de Oliveira CAS, Fonstein N, Girina O, Miranda FJF, Drumond J, Serafim EA, Afonso CRM. Effect of Cr additions on ferrite recrystallization and austenite formation in dual-phase steels heat treated in the intercritical temperature range. Mat Res 2016; 19: 258–266.10.1590/1980-5373-MR-2015-0641 ↗
25. Davies RG. Hydrogen embrittlement of dual-phase steels. Metall Mater Trans A 1981; 12: 1667–1672.10.1007/BF02643572 ↗
26. Davies RG. Influence of martensite content on the hydrogen embrittlement of dual-phase steels. Scripta Metall Mater 1983; 17: 889–892.10.1016/0036-9748(83)90255-7 ↗
27. De Cooman BC. Structure-properties relationship in TRIP steels containing carbide-free bainite. Curr Opin Solid S M 2004; 8: 285–303.10.1016/j.cossms.2004.10.002 ↗
28. Demeri MY. Advanced high-strength steels: science, technology, and applications. ASM International: Materials Park, US, 2012.10.31399/asm.tb.ahsssta.9781627082792 ↗
29. Depover T, Wallaert E, Verbeken K. Fractographic analysis of the role of hydrogen diffusion on the hydrogen embrittlement susceptibility of DP steel. Mater Sci Eng A 2016; 649; 201–208.10.1016/j.msea.2015.09.124 ↗
30. Devanathan MAV, Stachurski Z. Adsorption and diffusion of electrolytic hydrogen in palladium. Proc R Soc Lon Ser-A 1962; 270: 90–102.10.1098/rspa.1962.0205 ↗
31. Dias E, Horimoto L, dos Santos Pereira M. Microstructural characterization of CP steel used in automotive industry. Mater Sci Forum 2014; 775–776: 141–145.10.4028/www.scientific.net/MSF.775-776.141 ↗
32. Dong CF, Liu ZY, Li XG, Cheng YF. Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking. Int J Hydrogen Energ 2009; 34: 9879–9884.10.1016/j.ijhydene.2009.09.090 ↗
33. Eaves D, Williams G, McMurray HN. Inhibition of self-corrosion in magnesium by poisoning hydrogen recombination on iron impurities. Electrochim Acta 2012; 79; 1–7.10.1016/j.electacta.2012.05.148 ↗
34. Eliaz N, Shachar A, Tal B, Eliezer D. Characteristics of hydrogen embrittlement, stress corrosion cracking and tempered martensite embrittlement in high-strength steels. Eng Fail Anal 2002; 9: 167–184.10.1016/S1350-6307(01)00009-7 ↗
35. EN ISO 17081:2014, Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique.
36. Enos DG, Scully JR. A critical-strain criterion for hydrogen embrittlement of cold-drawn, ultrafine pearlitic steel. Metall Mater Trans A 2002; 33: 1151–1166.10.1007/s11661-002-0217-z ↗
37. Escobar DP, Verbeken K, Duprez L, Verhaege M. Evaluation of hydrogen trapping in high strength steels by thermal desorption spectroscopy. Mater Sci Eng A 2012; 551; 50–58.10.1016/j.msea.2012.04.078 ↗
38. Evers S, Rohwerder M. The hydrogen electrode in the “dry”: a Kelvin probe approach to measuring hydrogen in metals. Electrochem Commun 2012; 24; 85–88.10.1016/j.elecom.2012.08.019 ↗
39. Evers S, Senöz C, Rohwerder M. Hydrogen detection in metals: a review and introduction of a Kelvin probe approach. Sci Technol Adv Mat 2013a; 14: 014201.10.1088/1468-6996/14/1/014201 ↗
40. Evers S, Senöz C, Rohwerder M. Spatially resolved high sensitive measurement of hydrogen permeation by scanning Kelvin probe microscopy. Electrochim Acta 2013b; 110; 534–538.10.1016/j.electacta.2013.04.171 ↗
41. Ferreira PJ, Robertson IM, Birnbaum HK. Hydrogen effects on the interaction between dislocations. Acta Mater 1998; 46: 1749–1757.10.1016/S1359-6454(97)00349-2 ↗
42. Fonstein N, Kapustin M, Pottore N, Gupta I, Yakubovsky O. Factors that determine the level of the yield strength and the return of the yield-point elongation in low-alloy ferrite-martensite steels. Phys Met Metallogr 2007; 104: 315–323.10.1134/S0031918X07090153 ↗
43. Gaspard V, Kermouche G, Delafosse D, Barnoush A. Hydrogen effect on dislocation nucleation in a ferritic alloy Fe-15Cr as observed per nanoindentation. Mater Sci Eng A 2014; 604; 86–91.10.1016/j.msea.2014.02.041 ↗
44. Gesari SB, Pronsato ME, Juan A. The electronic structure and bonding of H pairs at Sigma=5 BCCFe grain boundary. Appl Surf Sci 2002; 187: 207–217.10.1016/S0169-4332(01)00990-4 ↗
45. Girina O, Fonstein N, Yakubovsky O, Panahi D, Bhattacharya D, Jansto S. The influence of Mo, Cr and B alloying on phase transformation and mechanical properties in Nb added high strength dual phase steels. In: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015: Conference Proceedings, Hangzhou, 2015.10.1002/9781119223399.ch24 ↗
46. Gündüz S. Effect of chemical composition, martensite volume fraction and tempering on tensile behaviour of dual phase steels. Mater Lett 2009; 63: 2381–2383.10.1016/j.matlet.2009.08.015 ↗
47. Hadžipašić AB, Malina J, Nižnik Š. The influence of microstructure on hydrogen diffusion and embrittlement of multiphase fine-grained steels with increased plasticity and strength. Chem Biochem Eng Q 2011a; 25: 159–169.
48. Hadžipašić AB, Malina J, Nižnik Š. The influence of microstructure on hydrogen diffusion in dual phase steel. Acta Metall Slovaca 2011b; 17: 129–137.
49. Hagihara Y. Evaluation of delayed fracture characteristics of high-strength bolt steels by CSRT. ISIJ Int 2012; 52: 292–297.10.2355/isijinternational.52.292 ↗
50. Halas S, Durakiewicz T, Mackiewicz P. Temperature-dependent work function shifts of hydrogenated/deuteriated palladium: a new theoretical explanation. Surf Sci 2004; 555: 43–50.10.1016/j.susc.2004.03.001 ↗
51. Hanna T, Hiramatsu H, Sakaguchi I, Hosono H. Highly hydrogen-sensitive thermal desorption spectroscopy system for quantitative analysis of low hydrogen concentration (~1×1016 atoms/cm3) in thin-film samples. Rev Sci Instrum 2017; 88: 053103.10.1063/1.4982255 ↗
52. Hanada H, Otsuka T, Nakashima H, Sasaki S, Hayakawa M, Sugisaki M. Profiling of hydrogen accumulation in a tempered martensite microstructure by means of tritium autoradiography. Scripta Mater 2005; 53: 1279–1284.10.1016/j.scriptamat.2005.07.031 ↗
53. Hänninen HE, Lee TC, Robertson IM, Birnbaum HK. In-situ observations on effects of hydrogen on deformation and fracture of A533b pressure-vessel steel. J Mater Eng Perform 1993; 2: 807–817.10.1007/BF02645681 ↗
54. Hashemi SG, Eghbali B. Evolution of high strength and ductile ultrafine grained dual phase superferrite low carbon V-Nb-Mo steel. Mater Sci Eng A 2017; 705: 32–41.10.1016/j.msea.2017.07.094 ↗
55. Hironaka S, Tanaka H, Matsumoto T. Effect of Si on mechanical property of galvannealed dual phase steel. Mater Sci Forum 2010; 638–642: 3260–3265.10.4028/www.scientific.net/MSF.638-642.3260 ↗
56. Hofmann H, Mattissen D, Schaumann TW. Advanced cold rolled steels for automotive applications. Steel Res Int 2009; 80: 22–28.
57. Hong Y, Zhou C, Zheng Y, Zhang L, Zheng J, An B, Chen X, Wang X. Hydrogen effect on the deformation evolution process in situ detected by nanoindentation continuous stiffness measurement. Mater Charact 2017; 127: 35–40.10.1016/j.matchar.2017.02.012 ↗
58. Hryniewicz T, Konarski P, Rokosz K, Rokicki R. SIMS analysis of hydrogen content in near surface layers of AISI 316L SS after electrolytic polishing under different conditions. Surf Coat Tech 2011; 205: 4228–4236.10.1016/j.surfcoat.2011.03.024 ↗
59. Ichitani K, Kanno M. Visualization of hydrogen diffusion in steels by high sensitivity hydrogen microprint technique. Sci Technol Adv Mat 2003; 4: 545–551.10.1016/j.stam.2003.12.006 ↗
60. Ichitani K, Kuramoto S, Kanno M. Quantitative evaluation of detection efficiency of the hydrogen microprint technique applied to steel. Corros Sci 2003; 45: 1227–1241.10.1016/S0010-938X(02)00218-4 ↗
61. Ishikawa N, Sueyoshi H, Nagao A. Hydrogen microprint analysis on the effect of dislocations on grain boundary hydrogen distribution in steels. ISIJ Int 2016; 56: 413–417.10.2355/isijinternational.ISIJINT-2015-329 ↗
62. Jacques PJ, Delannay F, Ladrière J. On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metall Mater Trans A 2001; 32: 2759–2768.10.1007/s11661-001-1027-4 ↗
63. Kamikawa N, Hirohashi M, Sato Y, Chandiran E, Miyamot G, Furuhara T. Tensile behavior of ferrite-martensite dual phase steels with nano-precipitation of vanadium carbides. ISIJ Int 2015; 55: 1781–1790.10.2355/isijinternational.ISIJINT-2015-106 ↗
64. Karsch T, Bomas H, Zoch HW, Mändl S. Influence of hydrogen content and microstructure on the fatigue behaviour of steel SAE 52100 in the VHCF regime. Int J Fatigue 2014; 60: 74–89.10.1016/j.ijfatigue.2013.09.006 ↗
65. Kheradmand N, Johnsen R, Olsen JS, Barnoush A. Effect of hydrogen on the hardness of different phases in super duplex stainless steel. Int J Hydrogen Energ 2016; 41: 704–712.10.1016/j.ijhydene.2015.10.106 ↗
66. Kim NJ, Thomas G. Effects of morphology on the mechanical-behavior of a dual phase Fe-2Si-0.1C steel. Metall Trans A 1981; 12: 483–489.10.1007/BF02648546 ↗
67. Koyama M, Akiyama E, Sawaguchi T, Ogawa K, Kireeva IV, Chumlyakov YI, Tsuzaki K. Hydrogen-assisted quasi-cleavage fracture in a single crystalline type 316 austenitic stainless steel. Corros Sci 2013; 75: 345–353.10.1016/j.corsci.2013.06.018 ↗
68. Koyama M, Rohwerder M, Tasan CC, Bashir A, Akiyama E, Takai K, Tsuzaki K. Recent progress in microstructural hydrogen mapping in steels: quantification, kinetic analysis, and multi-scale characterisation. Mater Sci Tech Ser 2017; 33: 1–16.10.1080/02670836.2017.1299276 ↗
69. Kröger B, Holbein R, Klose SG. Hydrogen assisted cracking in a high strength dual phase steel DP1180HY. Mater Test 2017; 59: 430–437.10.3139/120.111026 ↗
70. Kuang S, Kang YL, Yu H, Liu RD. Effect of continuous annealing parameters on the mechanical properties and microstructures of a cold rolled dual phase steel. Int J Min Met Mater 2009; 16: 159–164.10.1016/S1674-4799(09)60027-3 ↗
71. Kushida T. Hydrogen entry into steel by atmospheric corrosion. ISIJ Int 2003; 43: 470–474.10.2355/isijinternational.43.470 ↗
72. Kuziak R, Kawalla R, Waengler S. Advanced high strength steels for automotive industry: a review. Arch Civ Mech Eng 2008; 8: 103–117.10.1016/S1644-9665(12)60197-6 ↗
73. Lasia A, Grégoire D. General-model of electrochemical hydrogen absorption into metals. J Electrochem Soc 1995; 142: 3393–3399.10.1149/1.2050267 ↗
74. Le TD, Wilde BE. An autoradiographic technique for studying the segregation of hydrogen absorbed into carbon and low alloy steels. Corrosion 1983; 39: 258–265.10.5006/1.3581910 ↗
75. Lee DH, Lee JA, Seok MY, Baek UB, Nahm SH, Jang JI. Stress-dependent hardening-to-softening transition of hydrogen effects in nanoindentation of a linepipe steel. Int J Hydrogen Energ 2014; 39: 1897–1902.10.1016/j.ijhydene.2013.11.060 ↗
76. Li YD, Yang ZG, Liu YB, Li SX, Li GY, Hui WJ, Weng YQ. The influence of hydrogen on very high cycle fatigue properties of high strength spring steel. Mater Sci Eng A 2008; 489: 373–379.10.1016/j.msea.2008.01.089 ↗
77. Li M, Guo LQ, Qiao LJ, Bai Y. The mechanism of hydrogen-induced pitting corrosion in duplex stainless steel studied by SKPFM. Corros Sci 2012; 60: 76–81.10.1016/j.corsci.2012.04.010 ↗
78. Liu Q, Atrens A. A critical review of the influence of hydrogen on the mechanical properties of medium-strength steels. Corros Rev 2013; 31: 85–103.10.1515/corrrev-2013-0023 ↗
79. Liu Q, Atrens A. Reversible hydrogen trapping in a 3.5NiCrMoV medium strength steel. Corros Sci 2015; 96: 112–120.10.1016/j.corsci.2015.04.011 ↗
80. Liu Q, Zhou Q, Venezuela J, Zhang M, Wang J, Atrens A. A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction. Corros Rev 2016a; 34: 127–152.10.1515/corrrev-2015-0083 ↗
81. Liu Q, Venezuela J, Zhang M, Zhou Q, Atrens A. Hydrogen trapping in some advanced high strength steels. Corros Sci 2016b; 111: 770–785.10.1016/j.corsci.2016.05.046 ↗
82. Lovicu G, Bottazzi M, D’aiuto F, De Sanctis M. Dimatteo A, Santus C, Valentini R. Hydrogen embrittlement of automotive advanced high-strength steels. Metall Mater Trans A 2012; 43: 4075–4087.10.1007/s11661-012-1280-8 ↗
83. Luppo MI, Hazarabedian A, Ovejero-García J. Effects of delta ferrite on hydrogen embrittlement of austenitic stainless steel welds. Corros Sci 1999; 41: 87–103.10.1016/S0010-938X(98)00083-3 ↗
84. Lynch SP. A fractographic study of gaseous-hydrogen embrittlement and liquid-metal embrittlement in a tempered-martensitic steel. Acta Metall Mater 1984; 32: 79–90.10.1016/0001-6160(84)90204-9 ↗
85. Lynch SP. Environmentally assisted cracking – overview of evidence for an adsorption-induced localized-slip process. Acta Metall Mater 1988; 36: 2639–2661.10.1016/0001-6160(88)90113-7 ↗
86. Lynch S. Hydrogen embrittlement phenomena and mechanisms. Corros Rev 2012; 30: 105–123.10.1515/corrrev-2012-0502 ↗
87. Mansilla G, Hereñú S, Brandaleze E. Hydrogen effects on low cycle fatigue of high strength steels. Mater Sci Technol 2014; 30: 501–505.10.1179/1743284713Y.0000000328 ↗
88. Matsumura O, Sakuma Y, TakeChi H. Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel. T Iron Steel I Jpn 1987; 27: 570–579.10.2355/isijinternational1966.27.570 ↗
89. McNabb A, Foster PK. A new analysis of the diffusion of hydrogen in iron and ferritic steels. Cc/Eng Tech Appl Sci 1983; 16: 22–22.
90. Messmer RP, Briant CL. The role of chemical bonding in grain-boundary embrittlement. Acta Metall Mater 1982; 30: 457–467.10.1016/0001-6160(82)90226-7 ↗
91. Mohrbacher H. Martensitic automotive steel sheet – fundamentals and metallurgical optimization strategies. Adv Mat Res 2015; 1063: 130–142.10.4028/www.scientific.net/AMR.1063.130 ↗
92. Momotani Y, Shibata A, Terada D, Tsuji N. Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel. Int J Hydrogen Energ 2016; 42: 3371–3379.10.1016/j.ijhydene.2016.09.188 ↗
93. Nagao A, Smith CD, Dadfarnia M, Sofronis P, Robertson IM. The role of hydrogen in hydrogen embrittlement fracture of lath martensitic steel. Acta Mater 2002; 60: 5182–5189.10.1016/j.actamat.2012.06.040 ↗
94. Nagashima T, Koyama M, Bashir A, Rohwerder M, Tasan CC, Akiyama E, Tsuzaki K. Interfacial hydrogen localization in austenite/martensite dual-phase steel visualized through optimized silver decoration and scanning Kelvin probe force microscopy. Mater Corros 2017; 68: 306–310.10.1002/maco.201609104 ↗
95. Nagumo M, Nakamura M, Takai K. Hydrogen thermal desorption relevant to delayed-fracture susceptibility of high-strength steels. Metall Mater Trans A 2001; 32: 339–347.10.1007/s11661-001-0265-9 ↗
96. Nazarov AP, Marshakov AI, Rybkina AA. Iron hydrogenation under atmospheric corrosion. Studies using a scanning vibrating microscope. Prot Met Phys Chem S 2015; 51: 347–359.10.1134/S2070205115030181 ↗
97. Nazarov A, Vucko F, Thierry D. Scanning Kelvin probe for detection of the hydrogen induced by atmospheric corrosion of ultra-high strength steel. Electrochim Acta 2016; 216; 130–139.10.1016/j.electacta.2016.08.122 ↗
98. Nibur KA, Bahr DF, Somerday BP. Hydrogen effects on dislocation activity in austenitic stainless steel. Acta Mater 2006; 54: 2677–2684.10.1016/j.actamat.2006.02.007 ↗
99. Nishimura R, Shiraishi D, Maeda Y. Hydrogen permeation and corrosion behavior of high strength steel MCM 430 in cyclic wet–dry SO2 environment. Corros Sci 2004; 46: 225–243.10.1016/S0010-938X(03)00141-0 ↗
100. Nishimoto A, Koyama M, Yamato S, Oda Y, Awane T, Noguchi H. Detection of charged hydrogen in ferritic steel through cryogenic secondary ion mass spectrometry. ISIJ Int 2015; 55: 335–337.10.2355/isijinternational.55.335 ↗