Characterization of silicon acrylic resin containing silica nanoparticles as candidate materials for antifouling and anticorrosion properties in seawater
Source abstract
Abstract
Abstract The damage caused by marine fouling organisms to ships and underwater artificial equipment is becoming increasingly serious issue, and the prevention and control of marine biofouling has always been a research hotspot in marine coatings. Aiming at the problems of poor adhesion, long curing time and high curing temperature of low-surface energy marine antifouling coatings of organosilicon, a hydrophobic low-surface energy nano-SiO 2 /silicon acrylic resin nanocomposite coating was synthesized. The anticorrosive property of the composite coatings was analyzed by simulated seawater periodic immersion experiments. The gel permeation chromatography analysis showed that polydimethyl-siloxanes (PDMS) is involved in cross-linking reactions. The dynamic thermomechanical analysis indicated that the glass transition temperature of resin is 58 °C. The contact angle (CA) test showed that the CA of nanocomposite coating is 109.99°. All the detection results can support the excellent antifouling and anticorrosion performance of the low surface energy nanocomposite coatings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Marine Biology and Environmental Chemistry · Microplastics and Plastic Pollution · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hunan Provincial Key Laboratory of Efficient and Clean Utilization of Manganese Resources, College of Chemistry and Chemical Engineering , Central South University , Changsha, 410083 , Hunan , China
Cangzhou Dahua Group Co., Ltd. , Cangzhou, 061000 , Hebei , China
Funding
Hunan Provincial Science and Technology Department · National Natural Science Foundation of China
References (29)
Show source-provided references
1. Al-Naamani, L., Dobretsov, S., Dutta, J., and Burgess, J.G. (2017). Chitosan-zinc oxide nanocomposite coatings for the prevention of marinebiofouling. Chemosphere 168: 408–417, https://doi.org/10.1016/j.chemosphere.2016.10.033.10.1016/j.chemosphere.2016.10.033 ↗
2. Ammar, S., Ramesh, K., Vengadaesvaran, B., Ramesh, S., and Arof, A.K. (2016a). Amelioration of anticorrosion and hydrophobic properties of epoxy/PDMS composite coatings containing nano ZnO particles. Prog. Org. Coat. 92: 54–65, https://doi.org/10.1016/j.porgcoat.2015.12.007.10.1016/j.porgcoat.2015.12.007 ↗
3. Ammar, S., Ramesh, K., Vengadaesvaran, B., Ramesh, S., and Arof, A.K. (2016b). A novel coating material that uses nano-sized SiO2 particles to intensify hydrophobicity and corrosion protection properties. Electrochim. Acta 220: 417–26, https://doi.org/10.1016/j.electacta.2016.10.099.10.1016/j.electacta.2016.10.099 ↗
4. Andrews, D.H. (1992). Progress in low temperature physics. Phys. Today 22: 107–109, https://doi.org/10.1063/1.3035332.10.1063/1.3035332 ↗
5. Arukalam, I.O., Oguzie, E.E., and Li, Y. (2016). Fabrication of FDTS-modified PDMS-ZnO nanocomposite hydrophobic coating with anti-fouling capability for corrosion protection of Q235 steel. Colloid. Interf. Sci. 484: 220–228, https://doi.org/10.1016/j.jcis.2016.08.064.10.1016/j.jcis.2016.08.064 ↗
6. Azémard, C., Vieillescazes, C., and Ménager, M. (2014). Effect of photodegradation on the identification of natural varnishes by FT-IR spectroscopy. Microchem. J. 112: 137–149, https://doi.org/10.1016/j.microc.2013.09.020.10.1016/j.microc.2013.09.020 ↗
7. Buskens, P., Wouters, M., Rentrop, C., and Vroon, Z. (2012). A brief review of environmentally benign antifoulingand foul-release coatings for marine applications. J. Coat. Technol. Res. 10: 29–36, https://doi.org/10.1007/s11998-012-9456-0.10.1007/s11998-012-9456-0 ↗
8. Cai, J.P. and Liu, M. (2006). Novel accelerated corrosion test for LY12CZ and LC4CS aluminum alloys. Trans. Nonferr. Met. Soc. China. 16: s1415–s1418.
9. Callow, J.A. and Callow, M.E. (2011). Trends in the development of environmentally friendly fouling-resistant marine coatings. Nat. commun. 2: 244, https://doi.org/10.1038/ncomms1251.10.1038/ncomms1251 ↗
10. Giudice, C.A., Benitez, J.C. (1995). Coatings for corrosion protection in seawater structures. Corros. Rev. 13: 81–190. https://doi.org/10.1515/corrrev.1995.13.2-4.81.10.1515/CORRREV.1995.13.2-4.81 ↗
11. Gogoi, B., Barua, S., Sarmah, J.K., and Karak, N. (2018). In situ synthesis of a microbial foulingresistant, nanofibrillar cellulose-hyperbranched epoxy composite for advanced coating applications. Prog. Org. Coat. 124: 224–231, https://doi.org/10.1016/j.porgcoat.2018.04.025.10.1016/j.porgcoat.2018.04.025 ↗
12. He, Y.X., Wu, D.Y., Zhou, M.Y., Liu, H., Zhang, L., Chen, Q.Y., Yao, B.H., Yao, D.H., Jiang, D.F., Liu, C.T., et al. (2020). Effect of MoO3/carbon nanotubes on friction and wear performance of glass fabric-reinforced epoxy composites under dry sliding. Appl. Surf. Sci. 506: 144946, https://doi.org/10.1016/j.apsusc.2019.144946.10.1016/j.apsusc.2019.144946 ↗
13. Hussain, A.K., Sudin, I., Basheer, U.M., and Mohd Yusop, M.Z. (2019). A review on graphene-based polymer composite coatings for the corrosion protection of metals. Corros. Rev. 37: 343–363, https://doi.org/10.1515/corrrev-2018-0097.10.1515/corrrev-2018-0097 ↗
14. Jiang, W.B., Dai, A.Q., Zhou, T., and Xie, H.S. (2019). Hybrid polysiloxane/polyacrylate/nano-SiO2 emulsion for waterborne polyurethane coatings. Polym. Test. 80: 106110, https://doi.org/10.1016/j.polymertesting.2019.106110.10.1016/j.polymertesting.2019.106110 ↗
15. Jiang, W.B., Jin, X.F., Li, H., Zhang, S.Y., Zhou, T., and Xie, H.S. (2020). Modification of nano-hybrid silicon acrylic resin with anticorrosion and hydrophobic properties. Polym. Test. 82: 106287, https://doi.org/10.1016/j.polymertesting.2019.106287.10.1016/j.polymertesting.2019.106287 ↗
16. Kuan, H.C., Ma, C.C.M., and Chang, W.P. (2005). Synthesis, thermal, mechanical and rheological properties of multiwall carbon nanotube/waterborne polyurethane nanocomposite. Compos. Sci. Technol. 65: 1703–1710, https://doi.org/10.1016/j.compscitech.2005.02.017.10.1016/j.compscitech.2005.02.017 ↗
17. Qiao, B., Liang, Y., Wang, T.J., and Jiang, Y. (2016). Surface modification to produce hydrophobic nano-silica particles using sodium dodecyl sulfate as a modifier. Appl. Surf. Sci. 364: 103–109, https://doi.org/10.1016/j.apsusc.2015.12.116.10.1016/j.apsusc.2015.12.116 ↗
18. Sathya, S., Murthy, P.S., Das, A., Gomathi Sankar, G., Venkatnarayanan, S., and Pandian, R. (2016). Marine antifouling property of PMMA nanocomposite films: results of laboratory and field assessment. Int. Biodeter. Biodegr. 114: 57–66, https://doi.org/10.1016/j.ibiod.2016.05.026.10.1016/j.ibiod.2016.05.026 ↗
19. Smith, B. (1998). Infrared spectral interpretation: a systematic approach. CRC Press, Boca Raton.
20. Su, Y.C. and Chang, F.C. (2003). Synthesis and characterization of fluorinated polybenzoxazine material with low dielectric constant. Polymer 44: 7989–7996, https://doi.org/10.1016/j.polymer.2003.10.026.10.1016/j.polymer.2003.10.026 ↗
21. Wang, S., Li, Y., Fei, X., Sun, M., Zhang, C., and Li, Y. (2011). Preparation of a durable superhydrophobic membrane by electrospinning poly (vinylidene fluoride) (PVDF) mixed with epoxy-siloxane modified SiO2 nanoparticles: a possible route to superhydrophobic surfaces with low water sliding angle and high water contact angle. J. Colloid. Interf. Sci. 359: 380–388, https://doi.org/10.1016/j.jcis.2011.04.004.10.1016/j.jcis.2011.04.004 ↗
22. Wu, S. (2003). Surface and interfacial tensions of polymers, oligomers, plasticizers, and organic pigments. In: Book: the Wiley database of polymer properties. John Wiley & Sons, pp. 125–138.
23. Yamada, N., Suzumura, M., Koiwa, F., and Negishi, N. (2013). Differences in elimination efficiencies of escherichia coli in freshwater and seawater as a result of TiO2 photocatalysis. Water Res. 47: 2770–2776, https://doi.org/10.1016/j.watres.2013.02.023.10.1016/j.watres.2013.02.023 ↗
24. Yebra, D.M., Kiil, S., and Dam-Johansen, K. (2004). Antifouling technology—past, present and future steps towards efficient and environmentally friendly antifouling coatings. Prog. Org. Coat. 50: 75–104, https://doi.org/10.1016/j.porgcoat.2003.06.001.10.1016/j.porgcoat.2003.06.001 ↗
25. Yee, M.S.L., Khiew, P.S., Lim, S.S., Chiu, W.S., Tan, Y.F., and Kok, Y.Y. (2017). Enhanced marine antifouling performance of silver-titania nanotube composites from hydrothermal processing. Colloid. Surface. A. 20: 701–711, https://doi.org/10.1016/j.colsurfa.2017.02.034.10.1016/j.colsurfa.2017.02.034 ↗
26. Yesudass, S.A., Mohanty, S., Nayak, S.K., and Rath, C.C. (2017). Zwitterionic–polyurethane coatingsfor non-specific marine bacterial inhibition: a nontoxic approach for marine application. Eur. Polym. J. 96: 304–315.10.1016/j.eurpolymj.2017.09.019 ↗
27. Yilgör, E. and Yilgör, I. (2014). Silicone containing copolymers: synthesis, properties and applications. Prog. Polym. Sci. 39: 1165–1195, https://doi.org/10.1016/j.progpolymsci.2013.11.003.10.1016/j.progpolymsci.2013.11.003 ↗
28. Zhang, J., Pan, M., Luo, C., Chen, X., Kong, J., and Zhou, T. (2016). A novel composite paint (TiO2/fluorinated acrylic nanocomposite) for antifouling application in marine environments. J. Environ. Chem. Eng. 4: 2545–2555, https://doi.org/10.1016/j.jece.2016.05.002.10.1016/j.jece.2016.05.002 ↗
29. Zhao, X., Su, Y., Li, Y., Zhang, R., Zhao, J., and Jiang, Z. (2014). Engineering amphiphilic membrane surfaces based on PEO and PDMS segments for improved antifouling performances. J. Membrane. Sci. 450: 111–123, https://doi.org/10.1016/j.memsci.2013.08.044.10.1016/j.memsci.2013.08.044 ↗