Stacking Fault and Plastic Deformation Mechanism in Nano‐twinned Cu Pillar under Ultrahigh Stress
Source abstract
Abstract
Nano‐twinned Cu pillar is fabricated on an as‐electroplated nano‐twinned Cu film, which preferentially grew in the {111} plane family. With a nano‐indentation device (Picoindenter), a vertical ultrahigh pressure of 5100 MPa is applied to the nano‐twinned Cu pillar. The twin lamellar grain is greatly deformed under that ultrahigh external stress. Consequently, the top surface plane is pressed into the lattice beneath to continuously form edge dislocations. Those dislocations are driven along the possible slip systems toward the outer surface of the first matrix lamella, corresponding to the plastic deformation. A dislocation‐mediated mechanism is proposed to explain the plastic deformation of the nano‐twinned Cu pillar. Three types of slip systems are identified for the created dislocations, each resulting in either the displacement on the first matrix lamellar grain or cross‐slip on the twin boundary. At the ultrahigh external pressure, as the dislocations slide through the twin boundary, they would dissociate to Shockley partial dislocations and alter the stacking sequence in the twin boundary, creating stacking faults. The resultant stacking faults in the twin boundary are observed in the transmission electro microscopy (TEM) lattice images.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical and Materials Engineering National Central University No. 300, Zhongda Road Zhongli District Taoyuan City 32001 Taiwan, R.O.C.
Funding
Ministry of Science and Technology, Taiwan
References (35)
Show source-provided references
1. 10.1109/TCPMT.2022.314446110.1109/TCPMT.2022.3144461 ↗
2. 10.1109/MSSC.2021.311138610.1109/MSSC.2021.3111386 ↗
3. J.Knickerbocker P.Andry E.Colgan B.Dang T.Dickson X.Gu C.Haymes C.Jahnes Y.Liu J.Maria presented at2012 IEEE 62nd Electronic Components and Technology Conf. San Diego CA USA May‐June2012
4. Y.Lu W.Yin B.Zhang D.Yu L.Wan D.Shangguan G.Xia F.Qin M.Ru F.Xiao presented at2013IEEE 63rd Electronic Components and Technology Conf. Las Vegas NV USA May2013.
5. S. W.Yoon P.Tang R.Emigh Y.Lin P. C.Marimuthu R.Pendse presented at2013IEEE 63rd Electronic Components and Technology Conf. Las Vegas NV USA May2013.
6. M.‐J.Wang C.‐Y.Hung C.‐L.Kao P.‐N.Lee C.‐H.Chen C.‐P.Hung H.‐M.Tong presented at2012IEEE 62nd Electronic Components and Technology Conf. San Diego CA USA May‐June2012.
7. X.Zhang T.Chai J. H.Lau C.Selvanayagam K.Biswas S.Liu D.Pinjala G.Tang Y.Ong S.Vempati presented at200959th Electronic Components and Technology Conf. San Diego CA USA May2009.
8. S. W.Yoon J. H.Ku N.Suthiwongsunthorn P. C.Marimuthu F.Carson presented atIEEE Inter. Conf. on 3D System Integration San Francisco CA USA September2009.
9. L.Li P.Ton M.Nagar P.Chia presented at2017 IEEE 67th Electronic Components and Technology Conf. (ECTC) Orlando FL USA May‐June2017.
10. A.Kumar G.Verma V.Nath S.Choudhury presented atProc. of the Inter. Conf. on Nano‐electronics Circuits & Communication Systems 2017.
11. 10.1115/1.402862910.1115/1.4028629 ↗
12. 10.1038/srep0973410.1038/srep09734 ↗
13. J. Y.Juang K. C.Shie P.‐N.Hsu Y. J.Li K.Tu C.Chen presented at2019 IEEE 69th Electronic Components and Technology Conf. (ECTC) Las Vegas NV USA May2019.
14. 10.1109/LED.2021.310543410.1109/LED.2021.3105434 ↗
15. J.‐Y.Juang Y.‐C.Chu C.‐L.Lu C.Chen K.‐N.Tu presented at2017 5th Inter. Workshop on Low Temperature Bonding for 3D Integration (LTB‐3D) Tokyo Japan May2017.
16. 10.1109/TCPMT.2021.306908510.1109/TCPMT.2021.3069085 ↗
17. 10.1016/j.jtice.2021.10.02710.1016/j.jtice.2021.10.027 ↗
18. W.Yang H.Shintani M.Akaike T.Suga presented at2011 IEEE 61st Electronic Components and Technology Conf. (ECTC) Lake Buena Vista FL USA June2011.
19. C.Chen C.‐M.Liu H.‐W.Lin Y.‐S.Huang Y.‐C.Chu D.‐R.Lyu K.‐N.Chen K.‐N.Tu presented at2016 Pan Pacific Microelectronics Symp. (Pan Pacific) 2016.
20. M.Gerber C.Beddingfield S.O’Connor M.Yoo M.Lee D.Kang S.Park C.Zwenger R.Darveaux R.Lanzone presented at2011 IEEE 61st Electronic Components and Technology Conf. (ECTC) Lake Buena Vista FL USA June2011.
21. 10.1016/j.matdes.2021.10983010.1016/j.matdes.2021.109830 ↗
22. 10.1149/1.235390510.1149/1.2353905 ↗
23. 10.1016/j.mee.2011.04.01210.1016/j.mee.2011.04.012 ↗
24. 10.1126/science.116077710.1126/science.1160777 ↗
25. 10.1038/s41598-018-28812-010.1038/s41598-018-28812-0 ↗
26. 10.1016/j.actamat.2012.09.05210.1016/j.actamat.2012.09.052 ↗
27. 10.1016/j.actamat.2012.11.01510.1016/j.actamat.2012.11.015 ↗
28. 10.1016/S0921-5093(02)00126-010.1016/S0921-5093(02)00126-0 ↗
29. 10.1016/j.actamat.2010.10.02810.1016/j.actamat.2010.10.028 ↗
30. 10.1016/j.msea.2019.05.07910.1016/j.msea.2019.05.079 ↗
31. 10.1073/pnas.180866011510.1073/pnas.1808660115 ↗
32. 10.1002/pssa.221030013110.1002/pssa.2210300131 ↗
33. 10.1016/j.actamat.2007.12.02710.1016/j.actamat.2007.12.027 ↗
34. 10.1021/jp048023d10.1021/jp048023d ↗
35. 10.1038/s41377-019-0206-210.1038/s41377-019-0206-2 ↗