Microstructure, Phase Composition, and Thermal Stability of Two Zirconium Alloys Subjected to High‐Pressure Torsion at Different Temperatures

The structure, phase composition, and thermal stability of the industrial zirconium alloys, namely, E110 (Zr–1% Nb) and E635 (Zr–1% Nb–0.3% Fe–1.2% Sn), which are subjected to high‐pressure torsion (HPT) at room temperature (RT), 200, and 400 °С have been studied. HPT of Zr‐alloys at RT (10 revolutions) leads to the formation of grain–subgrain nano‐sized structure and to increase the microhardness by 2.1…2.8 times. The increase in the HPT temperature to 200–400 °С leads to the increase in the structural‐element average size. The structural‐element size in the complexly alloyed E635 alloy in all cases is lower compared with the E110 alloy. The hardening of the alloys after HPT at RT and 200 °С is close, and at 400 °С is much less. HPT initiates the α‐Zr → (ω‐Zr + β‐Zr) transformation, which is the main factor for alloys hardening. The α‐Zr → (ω‐Zr + β‐Zr) transformation in the E635 alloy occurs less quickly. The maximum amount (ω‐Zr + β‐Zr) phase in the structure of the alloys is observed after HPT at RT and 200 °C, and the minimum − at 400 °C. During heating, the alloys undergo the reverse (ω‐Zr + β‐Zr) → α transformation which depends on both the alloy composition and HPT temperature.