Temperature‐Dependent Dynamic Strain Aging in Selective Laser Melted 316L
Source abstract
Abstract
Additively manufactured austenitic stainless steel AISI 316L (EN 1.4404, X2CrNiMo17‐12‐2) is used at higher temperatures, e.g., in space applications. However, the high‐temperature properties of such materials have not been analyzed in detail yet. Thus, selective laser melted (SLM) 316L is tested in the solution‐annealed condition by compression and tensile tests at temperatures between 25 and 877 °C. The compressive strength of SLM 316L is higher in comparison with the conventionally produced reference material due to hardening by a high dislocation density and a fine substructure. However, tensile tests reveal a loss in ductility of the SLM material at temperatures between 300 and 627 °C, where the elongation to fracture is reduced from 65% to 39%. Alloying elements cause serrated yielding in the affected temperature range. Together with an increased normalized work‐hardening rate and a negative strain rate sensitivity, dynamic strain aging is found to cause the reduction of ductility.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science & Engineering Friedrich-Alexander-Universität Erlangen-Nürnberg Institute I: General Materials Properties 91052 Erlangen Germany
Ariane Group 82024 Taufkirchen Germany
References (60)
Show source-provided references
1. 10.1038/nmat502110.1038/nmat5021 ↗
2. M.Montero Sistiaga S.Nardone C.Hautfenne J.Van Humbeeck inProc. 27th Annu. Int. Solid Freeform Fabrication Symp. – Additive Manufacturing Conf. Solid Freeform Fabrication Texas USA2016 p.558.
3. Hong Y. · Mater. Sci. Eng., A · 2018 · 740 · 420
4. 10.1007/s40195-019-00983-310.1007/s40195-019-00983-3 ↗
5. 10.1557/jmr.2014.15710.1557/jmr.2014.157 ↗
6. 10.1016/j.msea.2019.01.11010.1016/j.msea.2019.01.110 ↗
7. 10.1016/j.jnucmat.2015.12.03410.1016/j.jnucmat.2015.12.034 ↗
8. 10.1016/j.matdes.2017.08.07210.1016/j.matdes.2017.08.072 ↗
9. 10.1016/j.jnucmat.2021.15284710.1016/j.jnucmat.2021.152847 ↗
10. Williams R. · Addit. Manuf. · 2020 · 37 · 101706
11. 10.1007/s11465-015-0341-210.1007/s11465-015-0341-2 ↗
12. 10.1108/1355254061070701310.1108/13552540610707013 ↗
13. 10.1016/j.actamat.2020.07.06310.1016/j.actamat.2020.07.063 ↗
14. 10.1016/j.jmst.2019.09.01710.1016/j.jmst.2019.09.017 ↗
15. 10.1016/j.addma.2019.10097710.1016/j.addma.2019.100977 ↗
16. 10.1016/0001-6160(83)90007-X10.1016/0001-6160(83)90007-X ↗
17. 10.1016/S0921-5093(01)01173-X10.1016/S0921-5093(01)01173-X ↗
18. Mughrabi H. · 2002 · 343
19. Blum W. · 1985
20. 10.1016/S0921-5093(00)02010-410.1016/S0921-5093(00)02010-4 ↗
21. A.Mertens S.Reginster Q.Contrepois T.Dormal O.Lemaire J.Lecomte-Beckers Mater. Sci. Forum2014 783–786 898.10.4028/www.scientific.net/MSF.783-786.898 ↗
22. 10.1016/j.msea.2015.10.07310.1016/j.msea.2015.10.073 ↗
23. 10.1108/1355254131130293210.1108/13552541311302932 ↗
24. 10.1007/s11740-009-0192-y10.1007/s11740-009-0192-y ↗
25. 10.1007/s11661-013-1978-210.1007/s11661-013-1978-2 ↗
26. 10.1016/S0142-1123(03)00154-310.1016/S0142-1123(03)00154-3 ↗
27. 10.3390/ma1207109010.3390/ma12071090 ↗
28. 10.1016/0001-6160(88)90331-810.1016/0001-6160(88)90331-8 ↗
29. Mannan S. L. · Trans. Indian Inst. Met. · 1983 · 36 · 313
30. 10.1023/A:100438151047410.1023/A:1004381510474 ↗
31. 10.1007/BF0274399310.1007/BF02743993 ↗
32. Portevin A. · C. R. Acad. Sci. · 1923 · 176 · 507
33. Brnic J. · J. Mater. Sci. Technol. · 2009 · 25 · 175
34. 10.1016/S0007-8506(07)60790-210.1016/S0007-8506(07)60790-2 ↗
35. 10.1179/174328406X10923010.1179/174328406X109230 ↗
36. 10.1590/S1516-1439200700040002110.1590/S1516-14392007000400021 ↗
37. Birnbaum A. J. · Addit. Manuf. · 2019 · 29 · 100784
38. 10.1016/j.msea.2014.12.01810.1016/j.msea.2014.12.018 ↗
39. 10.1016/j.electacta.2018.04.18810.1016/j.electacta.2018.04.188 ↗
40. 10.1007/s12613-020-1991-610.1007/s12613-020-1991-6 ↗
41. 10.1016/j.matlet.2019.02.04710.1016/j.matlet.2019.02.047 ↗
42. 10.1016/j.msea.2019.13808110.1016/j.msea.2019.138081 ↗
43. 10.1016/j.optlastec.2013.09.01710.1016/j.optlastec.2013.09.017 ↗
44. 10.1016/j.msea.2016.07.06110.1016/j.msea.2016.07.061 ↗
45. 10.1016/j.matdes.2013.08.08510.1016/j.matdes.2013.08.085 ↗
46. 10.1007/s11661-018-4607-210.1007/s11661-018-4607-2 ↗
47. 10.1016/j.msea.2019.05.07910.1016/j.msea.2019.05.079 ↗
48. 10.1016/S0921-5093(00)00992-810.1016/S0921-5093(00)00992-8 ↗
49. 10.1016/j.msea.2004.03.00410.1016/j.msea.2004.03.004 ↗
50. Kubin L. P. · J. Phys. III · 1991 · 1 · 929
51. 10.1016/j.jnucmat.2004.04.33110.1016/j.jnucmat.2004.04.331 ↗
52. 10.1080/0141861880820450110.1080/01418618808204501 ↗
53. 10.1016/j.scriptamat.2005.03.04310.1016/j.scriptamat.2005.03.043 ↗
54. Woodford D. A. · Trans. ASM · 1969 · 62 · 291
55. 10.1007/BF0264383610.1007/BF02643836 ↗
56. 10.1016/0956-7151(90)90021-810.1016/0956-7151(90)90021-8 ↗
57. 10.1016/0001-6160(67)90211-810.1016/0001-6160(67)90211-8 ↗
58. 10.1016/j.msea.2004.08.02910.1016/j.msea.2004.08.029 ↗
59. 10.1002/pssa.221030012010.1002/pssa.2210300120 ↗
60. 10.1016/j.msea.2012.06.06710.1016/j.msea.2012.06.067 ↗