journal article·2016-10

Effect of Annealing on Mechanical Property and Formability of Cu/Al Clad Bipolar Plates in Proton Exchange Membrane Fuel Cells

Chuanjie Wang, Shaoxi Xue, Gang Chen, Xiyuan Lin, Hongwei Liu, Huan Liu, Peng Zhang

Advanced Engineering Materials· Volume 18· Issue 10
Publisher page

Abstract

The effect of annealing on the mechanical property in uniaxial tension tests and formability in micro coining processes of Cu/Al clad bipolar plates in proton exchange membrane fuel cells (PEMFC) is investigated. The results indicate both the thickness and the micro hardness of the interface layer increase with the increase of the holding time. The stress decreases firstly then increases with the increase of the holding time. The elongation decreases monotonically with the increase of the holding time. The micro coining of array micro channels results indicate that the height of micro rib increases with loading. The height of micro rib increases from the center to the edge along the transverse direction of the specimen. The simulation result by finite element method (FEM) verifies the experimental one.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Mechanical stress and fatigue analysis · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering Harbin Institute of Technology at Weihai Weihai 264209 China

References (51)

Show source-provided references
1. 10.1016/j.ijhydene.2007.12.06810.1016/j.ijhydene.2007.12.068 ↗
2. 10.1016/j.jpowsour.2014.04.08110.1016/j.jpowsour.2014.04.081 ↗
3. 10.1016/S0378-7753(03)00070-310.1016/S0378-7753(03)00070-3 ↗
4. 10.1016/S0378-7753(02)00542-610.1016/S0378-7753(02)00542-6 ↗
5. 10.1016/j.electacta.2005.10.01510.1016/j.electacta.2005.10.015 ↗
6. 10.1016/S0378-7753(02)00062-910.1016/S0378-7753(02)00062-9 ↗
7. 10.1016/j.electacta.2007.12.07810.1016/j.electacta.2007.12.078 ↗
8. 10.1016/j.ijhydene.2010.01.06210.1016/j.ijhydene.2010.01.062 ↗
9. 10.1016/j.jpowsour.2008.09.07910.1016/j.jpowsour.2008.09.079 ↗
10. 10.1155/2012/82807010.1155/2012/828070 ↗
11. 10.1016/j.jpowsour.2009.12.04610.1016/j.jpowsour.2009.12.046 ↗
12. 10.1016/j.jpowsour.2007.09.03610.1016/j.jpowsour.2007.09.036 ↗
13. 10.1016/j.jpowsour.2012.01.11210.1016/j.jpowsour.2012.01.112 ↗
14. 10.1016/j.ijhydene.2014.04.10310.1016/j.ijhydene.2014.04.103 ↗
15. 10.1016/j.jpowsour.2007.05.08910.1016/j.jpowsour.2007.05.089 ↗
16. 10.1016/j.matdes.2008.05.07410.1016/j.matdes.2008.05.074 ↗
17. 10.1016/j.ijhydene.2014.01.20110.1016/j.ijhydene.2014.01.201 ↗
18. 10.1016/j.jpowsour.2010.06.07810.1016/j.jpowsour.2010.06.078 ↗
19. 10.1016/j.jpowsour.2010.03.01810.1016/j.jpowsour.2010.03.018 ↗
20. 10.1016/j.jpowsour.2004.12.07210.1016/j.jpowsour.2004.12.072 ↗
21. 10.1007/s00170-014-6563-310.1007/s00170-014-6563-3 ↗
22. 10.1016/j.renene.2014.06.02110.1016/j.renene.2014.06.021 ↗
23. 10.1007/s11663-013-9882-010.1007/s11663-013-9882-0 ↗
24. 10.1007/s00170-012-4033-310.1007/s00170-012-4033-3 ↗
25. 10.1007/s00170-012-4162-810.1007/s00170-012-4162-8 ↗
26. 10.1002/fuce.20130013710.1002/fuce.201300137 ↗
27. 10.1179/1433075X13Y.000000011410.1179/1433075X13Y.0000000114 ↗
28. 10.1016/j.ijhydene.2014.03.01310.1016/j.ijhydene.2014.03.013 ↗
29. 10.1002/fuce.20140009110.1002/fuce.201400091 ↗
30. Kim M. J. · Proc. Instit. Mech. Eng. Part B J Eng Manuf · 2014 · 095440541454110
31. 10.1016/j.enconman.2014.06.03510.1016/j.enconman.2014.06.035 ↗
32. 10.1016/j.micron.2007.03.00310.1016/j.micron.2007.03.003 ↗
33. 10.1088/1742-6596/144/1/01200110.1088/1742-6596/144/1/012001 ↗
34. 10.1016/j.jpowsour.2005.01.05510.1016/j.jpowsour.2005.01.055 ↗
35. K. S.Weil J. Y.Kim G. G.Xia Z. G.Yang S.Chang M.Hardy Development of low‐cost clad metal bipolar plates for PEM fuel cells DOE‐EERE (HFCIT) Report; July2005.
36. 10.1016/j.jpowsour.2007.03.03210.1016/j.jpowsour.2007.03.032 ↗
37. Kim J. H. · Int. J. Electrochem. Sci · 2011 · 6 · 436510.1016/S1452-3981(23)18334-9 ↗
38. 10.1016/j.ijhydene.2006.08.04110.1016/j.ijhydene.2006.08.041 ↗
39. 10.1016/j.msea.2004.05.05110.1016/j.msea.2004.05.051 ↗
40. 10.1016/j.scriptamat.2010.05.01010.1016/j.scriptamat.2010.05.010 ↗
41. 10.1007/BF0246721010.1007/BF02467210 ↗
42. 10.1109/95.29637210.1109/95.296372 ↗
43. 10.1016/j.matdes.2012.12.07010.1016/j.matdes.2012.12.070 ↗
44. 10.1016/j.jallcom.2004.07.05710.1016/j.jallcom.2004.07.057 ↗
45. 10.1016/j.compositesb.2012.04.07310.1016/j.compositesb.2012.04.073 ↗
46. 10.1016/j.msea.2010.04.08010.1016/j.msea.2010.04.080 ↗
47. 10.1016/j.matdes.2014.07.06610.1016/j.matdes.2014.07.066 ↗
48. ASTM E8‐04 Standard Test Methods for Tension Testing of Metallic Materials American Society of Testing and Materials West Conshohocken2004.
49. 10.1016/j.msea.2011.05.07710.1016/j.msea.2011.05.077 ↗
50. 10.1038/srep2389510.1038/srep23895 ↗
51. 10.1016/S0924-0136(03)00080-310.1016/S0924-0136(03)00080-3 ↗