Selective Laser Melting of a Near‐α Ti6242S Alloy for High‐Performance Automotive Parts

This study aims to investigate additively manufactured Ti6242S specimens compared with the widely used Ti64 alloy with a special focus on microstructure and mechanical properties as well as the impact of subsequent heat treatments. As the Ti6242S alloy, which belongs to the family of near‐α Ti‐alloys, is often used at higher service temperatures, uniaxial tensile tests are performed at a room temperature up to 500 °C. By means of optical and electron microscopy, it is found that the as‐built microstructure consists of acicular α′ martensite, which decomposes to α + β during the subsequent heat treatment. A special focus on the prior microstructure shows that the Ti6242S alloy has a small β grain size, which influences the resulting α′ microstructure after the β → α′ phase transformation. Furthermore, the mechanical properties at room temperature as well as elevated temperatures exceed the values for selective laser melted Ti64 and conventionally cast Ti6242 material. The heat‐treated Ti6242S specimens exhibit an ultimate tensile strength of about 1213 MPa including a ductility of 11.3% at room temperature. These values may path the way to a substitution of the widely used Ti64 alloy by the near‐α Ti6242S alloy, especially for highly loaded components at elevated temperatures.