Use of wood dust fly ash from an industrial pulverized fuel facility for rendering
Source abstract
Abstract
Abstract Wood dust II fly ash, which was generated after boiler retrofit (implementation of low-NOx burners combined with over-fire air), apparently is an enhanced quality for rendering. This is attributed to the mineral phases formed, an increase in the amount of free lime, and performance test results. After accelerated aging tests, the wood dust II fly ash showed no visible occurrence of cracks or detachment of the render base coat from the substrate. Tensile strength values met the applicable limit requirement of 8 MPa. The results contribute to a sustainable ash management for wood fly ash from pulverized fuel facilities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Recycling and Waste Management Techniques · Coal and Its By-products
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Use of biomass gasification fly ash in lightweight plasterboard10.1021/ef060260n ↗
2. Ash properties and environmental impact of various biomass and coal fuels and their blends10.1016/j.fuproc.2010.11.013 ↗
3. Characterization of biomass ashes from power plants firing agricultural residues10.1021/ef201134m ↗
4. Association · 2003
5. Ash formation from excluded minerals including consideration of mineral−mineral associations †10.1021/ef060414z ↗
6. Mineral admixtures
7. A review on the utilization of fly ash10.1016/j.pecs.2009.11.003 ↗
8. Life cycle sustainability assessment of fly ash concrete structures10.1016/j.rser.2017.05.232 ↗
9. Reduction of the cement content in rendering mortars with fine glass aggregates10.1016/j.jclepro.2015.02.049 ↗
10. Influence of fly ash allocation approaches on the life cycle assessment of cement-based materials10.1016/j.jclepro.2017.04.093 ↗
11. Toxicity and environmental and economic performance of fly ash and recycled concrete aggregates use in concrete: A review10.1016/j.heliyon.2018.e00611 ↗
12. Ashes from co-combustion of coal and biomass: New industrial wastes10.1016/j.resconrec.2012.09.010 ↗
13. W. Vom Berg H.-J. Feuerborn Coal Combustion Products in Europe – Valuable Raw Materials for the Construction Industry 2006 Essen, Germany.
14. P. Grammelis G. Skodras E. Kakaras Effects of biomass co-firing with coal on ash properties Part I: Characterisation and PSD. Fuel 85 16 2006 2310 2315.10.1016/j.fuel.2006.01.036 ↗
15. T.R. Naik, R. Kumar, Sustainable Concrete with Industrial and Postconsumer By-Product Materials, in: Sabnis GM, editor. Green building with concrete: Sustainable design and construction, pp. 337–372.
16. Properties and durability of concrete made with blended fly ash. title no. 95–M43
17. Coal Combustion Products in Europe- an update on Production and Utilisation, Standardisation and Regulation-. Universtiy of Kentucky: University of Kentucky, Center for Applied Energy Research; 2011.
18. A critical review on additives to reduce ash related operation problems in biomass combustion applications10.1016/j.egypro.2012.03.004 ↗
19. Opportunities and challenges in the use of coal fly ash for soil improvements–a review10.1016/j.jenvman.2014.07.005 ↗
20. Fly ash for soil amelioration: a review on the influence of ash blending with inorganic and organic amendments10.1016/j.earscirev.2013.10.003 ↗
21. Parker · 1997
22. utilisation – Impact of recent changes in power generation practices
23. Study on fired bricks with replacing clay by fly ash in high volume ratio10.1016/j.conbuildmat.2004.05.017 ↗
24. Gamma-ray shielding effectiveness of novel light-weight clay-flyash bricks10.1016/j.radphyschem.2016.06.013 ↗
25. Physical and thermal properties of fired clay bricks mixed with rice husk ash and fly ash10.4028/www.scientific.net/KEM.718.169 ↗
26. Lime based steam autoclaved fly ash bricks10.1016/j.conbuildmat.2006.01.005 ↗
27. Development of greener alkali-activated cement: utilisation of sodium carbonate for activating slag and fly ash mixtures10.1016/j.jclepro.2015.12.010 ↗
28. Influence of limestone content, fineness, and composition on the properties and microstructure of alkali-activated slag cement10.1016/j.cemconcomp.2016.06.015 ↗
29. Shrinkage and strength development of alkali-activated fly ash-slag binary cements10.1016/j.conbuildmat.2017.06.040 ↗
30. Biofunctional characteristics of lignite fly ash modified by humates: a new soil conditioner
31. Biochar application does not improve the soil hydrological function of a sandy soil10.1016/j.geoderma.2015.03.022 ↗
32. Influence of biochar application methods on the phytostabilization of a hydrophobic soil contaminated with lead and acid tar10.1016/j.jenvman.2014.11.023 ↗
33. Effect of biochar application on soil hydrological properties and physical quality of sandy soil10.1016/j.geoderma.2016.06.028 ↗
34. The potential of biochar to remove hydrophobic compounds from model sandy soils10.1016/j.geoderma.2016.09.018 ↗
35. The different properties of lightweight aggregates with the fly ashes of fluidized-bed and mechanical incinerators10.1016/j.conbuildmat.2015.10.068 ↗
36. Effect of calcium compounds on lightweight aggregates prepared by firing a mixture of coal fly ash and waste glass10.1016/j.ceramint.2017.08.110 ↗
37. Structural concrete using sintered flyash lightweight aggregate: a review10.1016/j.conbuildmat.2017.08.005 ↗
38. Reuse of woody biomass fly ash in cement-based materials10.1016/j.conbuildmat.2014.11.052 ↗
39. Lime render layers: an overview of their properties10.1016/j.culher.2013.07.004 ↗
40. Using fine recycled concrete aggregate for mortar production10.1590/S1516-14392013005000164 ↗
41. Durability of current renderings: a probabilistic analysis10.1016/j.autcon.2014.04.002 ↗
42. Environmental impact of cement production: detail of the different processes and cement plant variability evaluation10.1016/j.jclepro.2009.12.014 ↗
43. Reduction of the cement content in mortars made with fine concrete aggregates10.1617/s11527-013-0053-1 ↗
44. Incorporation of fine sanitary ware aggregates in coating mortars10.1016/j.conbuildmat.2015.03.028 ↗
45. Mixed cement containing fly ash for masonry and plastering work10.1016/j.conbuildmat.2005.01.009 ↗
46. Influence of application conditions on the cracking susceptibility of renderings
47. Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastes10.1016/j.conbuildmat.2015.12.171 ↗
48. Incorporation of fine glass aggregates in renderings10.1016/j.conbuildmat.2013.03.042 ↗
49. Experimental assessment of commercial one-coat renders for buildings façades10.1016/j.conbuildmat.2010.06.044 ↗
50. Impact of accelerated carbonation on OPC cement paste blended with fly ash10.1016/j.cemconres.2014.10.003 ↗
51. G. Fava, T.R. Naik, Compressive Strength and Leaching Behavior of Mortars with Biomass Ash, in: By-products Utilization Sustainable Construction Materials and Technologies: Conference Proceedings Downloads and Books, The University of Wisconsin Milwaukee, eds P. Claisse, E Ganjian, T. Naik, 2016.
52. Diseño y prestaciones de morteros de albañilería elaborados con áridos reciclados procedentes de escombro de hormigón10.3989/mc.2009.44207 ↗
53. An overview of the organic and inorganic phase composition of biomass10.1016/j.fuel.2011.09.030 ↗
54. van Loo · 2008
55. An overview of the composition and application of biomass ash. Part 1. Phase–mineral and chemical composition and classification10.1016/j.fuel.2012.09.041 ↗
56. Power station fly ash — a review of value-added utilization outside of the construction industry10.1016/S0921-3449(00)00084-7 ↗
57. Wood ash composition as a function of furnace temperature10.1016/0961-9534(93)90032-Y ↗
58. Quality characteristics of Greek fly ashes and potential uses10.1016/j.fuproc.2006.09.001 ↗
59. European Committee for Standardization. Specification for mortar for masonry: Part 1: Rendering and plastering mortar;91.100.10(prEN 998-1). Brussels, Belgium: Technical Committee CEN/TC 125; 2010.
60. European Organization for Technical Approvals. Guideline for European Technical Approval of External Thermal Insulation Composite Systems with Rendering(ETAG 004). Brussels, Belgium: European Organization for Technical Approvals (EOTA); 2004; amendment 2008.
61. European Committee for Standardization. Methods of test for mortar for masonry- Part 11: Determination of flexural and compressive strength of hardened mortar;91.100.10(pfEN 1015-11). Brussels, Belgium: European Commission; 1999.
62. A comparative study on the practical use of low sulfide base-metal tailings as aggregates for rendering and masonry mortars10.1016/j.jclepro.2015.06.004 ↗
63. GC. Bye, Portland cement: Composition, production and properties / G.C. Bye. Oxford: Published on behalf of the Institute of Ceramics by Pergamon, 1983.
64. Concrete Science
65. Chemical Admixtures- Recent Developments
66. M.Y. Sabnis, G.M. Sabnis, Cement Concrete, Mix-Design Principals adn Practice. 5th ed. Girgaum, Mumbai: N. V. Maroo for Vipul Prakashan; 2004.
67. International Energy Agency · 2009
68. A review of the interference of carbon containing fly ash with air entrainment in concrete10.1016/j.pecs.2007.03.002 ↗
69. Coal fly ash: a retrospective and future look10.1016/S0016-2361(98)00148-3 ↗
70. Reduction of cement content in renderings with fine sanitary ware aggregates10.1617/s11527-015-0598-2 ↗
71. Beton-Kalender, Schwerpunkte: Silos und Behalter 2016 Wilhelm Ernst & Sohn Verlag fur Architektur und technische Wissenschaften Ingenieurbauwerke (Beton-Kalender (VCH)) (German Edition).
72. C.D. Lawrence. Physicochemical and Mechanical Properties of Portland Cements. In: Lea 1998- Lea's chemistry of cement and concrete, p. 343–419.10.1016/B978-075066256-7/50020-5 ↗
73. Moran · 2004
74. Tomei · 2015
75. R. Gupta (ed.). Impact of Mineral Impurities in Solid Fuel Combustion 1999th ed., 2007 Springer.
76. T. Sankaralingam, C. Roy, S.N. Pandey, A.K. Mathur, Fly Ash For Cement Concrete: Resource For High Strength and Durability of Structures at Lower Cost. [April 12, 2012]; Available from: http://cbrienvis.nic.in/Books/Fly-Ash-for-Cement-Concrete.pdf.
77. Ash transformation during co-firing coal and straw10.1016/j.fuel.2006.10.008 ↗
78. Klein · 1993
79. Gu · 2015
80. S.K. Dhanjal, L. Young, P. Storer, Automatic Control of Cement Quality using On-Line XRD. [October 09, 2017]; Available at: http://fct-actech.com/documents/ATT00017.pdf.
81. The influence of the combustion atmosphere on the desulfurization characteristics
82. A new approach for the classification of coal fly ashes based on their origin, composition, properties, and behaviour10.1016/j.fuel.2006.11.020 ↗
83. European Committee for Standardization. EN 450-1, Fly ash for concrete - Part 1: Definition, specifications and conformity criteria. 5th ed;91.100.30(EN 450-1). Brussels, Belgium: Technical Committee CEN/TC 104; 2012.
84. The effect of CaO addition on mechanical properties of cermaic tiles
85. Introduction to mineral
86. An overview of the composition and application of biomass ash10.1016/j.fuel.2012.10.001 ↗
87. Cristobalite formation from thermal treatment of Texas lignite fly ash10.1016/S0016-2361(99)00057-5 ↗
88. Influence of limestone and anhydrite on the hydration of Portland cements10.1016/j.cemconcomp.2013.11.007 ↗
89. 1995
90. Carbonation of cement-based materials: Challenges and opportunities10.1016/j.conbuildmat.2016.05.080 ↗
91. Carbonation of cement paste: Understanding, challenges, and opportunities10.1016/j.conbuildmat.2016.04.138 ↗
92. A review on effects of curing, sheltering, and CO2 concentration upon natural carbonation of concrete10.1016/j.conbuildmat.2016.09.056 ↗
93. R.S. Khairallah, Analysis of Autogenous and Drying Shrinkage of Concrete, Master's dissertation, 2009, Hamilton, Ontario.
94. Dynamics of the internal reaction layer arising during carbonation of concrete10.1016/j.ces.2006.11.014 ↗
95. Competition of several carbonation reactions in concrete: a parametric study10.1016/j.cemconres.2008.09.003 ↗
96. W.B. Butler, Sulphate attack on concrete: What it is and how to stop it. [April 01, 2013]; Available at: http://www.adaa.asn.au/documents/Technical_Notes_2.pdf.
97. Mineralische Bindemittel, Beton, Mauerwerk, Stahl, Holz, Kunsttoffe. [June 01, 2013]; Available from: http://www.ifb.ethz.ch/education/bachelor_werkstoffe1/2010FS/Werkstoffe_im_Bauwesen_FS10.pdf.
98. Effect of carbonation on the rebound number and compressive strength of concrete10.1016/j.cemconcomp.2008.10.001 ↗
99. Accelerators
100. Superpasticizers