Physics-informed FEA–GPR–PSO optimization of perforated CARALL structures for simultaneous bending strength increase and lightweight design

1. Reducing Vehicle Weight and improving U.S. Energy Efficiency using Integrated Computational Materials Engineering10.1007/s11837-012-0424-z ↗

2. J. Zhang, V. S. Chevali, H. Wang, C. Wang,Current status of carbon fibre and carbon fibre composites recycling, Compos Part B-eng 193(2020)108053 1359-8368. doi: 10.1016/j.compositesb.2020.108053.10.1016/j.compositesb.2020.108053 ↗

3. Design and manufacturing of automobile hood using natural composite structure10.1016/j.compositesb.2015.12.033 ↗

4. Numerical and experimental analysis of machinability aspects and surface damage in drilling MD-CFRP laminates10.1016/j.compositesb.2025.113149 ↗

5. M.S Sohn, X.Z Hu, J.K Kim, L Walker, Impact damage characterisation of carbon fibre/epoxy composites with multi-layer reinforcement, Compos Part B-eng 31(2000) 81-691, 1359-8368,https://doi.org/10.1016/S1359-8368(00)00028-7.10.1016/S1359-8368(00)00028-7 ↗

6. J. Zhou, B. Liao, Y. Shi, Y. Zuo, H. Tuo, L. Jia, Low-velocity impact behavior and residual tensile strength of CFRP laminates,Compos Part B-eng 161(2019) 300-313 1359-8368,https://doi.org/10.1016/j.compositesb.2018.10.090.10.1016/j.compositesb.2018.10.090 ↗

7. Optimization of machining quality for carbon fiber reinforced thermoplastic polymer/aluminum hybrid laminates via ultrasonic-assisted processing and interfacial modification

8. Y. Hu, B. Yuan, F. Cheng, X. Hu, NaOH etching and resin pre-coating treatments for stronger adhesive bonding between CFRP and aluminium alloy, Compos Part B-eng 178(2019)107478 1359-8368,https://doi.org/10.1016/j.compositesb.2019.107478.10.1016/j.compositesb.2019.107478 ↗

9. U. Bakhbergen, F. Abbassi, G. Kalimuldina, R. Montazami, E. Shehab, S.Araby, Recent approaches of interface strengthening in fibre metal laminates: Processes, measurements, properties and numerical analysis, Compos Part B-eng 285(2024)111744 1359-8368,https://doi.org/10.1016/j.compositesb.2024.111744.10.1016/j.compositesb.2024.111744 ↗

10. Classification of fiber metal laminates (FMLs), adhesion theories and methods for improving interfacial adhesion: a review10.1016/j.tws.2024.111744 ↗

11. Empirical Characterization and Modeling of Cohesive–to–Adhesive Shear Fracture Mode transition due to increased Adhesive Layer Thicknesses of Fiber Reinforced Composite Single–Lap Joints10.1007/s10443-024-10251-y ↗

12. Progressive damage behaviour and failure mechanisms of carbon fibre reinforced aluminium laminates under three-point bending

13. Effects of stacking sequences on the axial compressive buckling behavior and failure characteristics of channel-section CFRP/Al laminate columns

14. Comparison of stacking sequence on the low-velocity impact failure mechanisms and energy dissipation characteristics of CFRP/Al hybrid laminates10.1002/pc.26867 ↗

15. Enhancing mechanisms of electro-spun nanofiber veils on the low-velocity impact and residual compressive performances of carbon fiber reinforced aluminum laminates

16. Shape optimization of interior cutouts in composite panels10.1007/BF01279653 ↗

17. Effect of Perforation Area and Arrangement Pattern on Structural Behaviour of Nature inspired Perforated Hollow Structure

18. B. Yeh, B. Herzog, Effect of Holes on the Structural Capacities of Laminated Veneer Lumber, World Conference on Timber Engineering (2018).

19. Development of surrogate models of clamp configuration for optical glass lens centering through finite element analysis and machine learning10.1007/s00170-022-09915-5 ↗

20. Surrogate modeling for the homogenization of elastoplastic composites based on RBF interpolation10.1016/j.cma.2023.116282 ↗

21. Surrogate modeling of parametrized finite element simulations with varying mesh topology using recurrent neural networks10.1016/j.array.2022.100137 ↗

22. Recent advances in surrogate-based optimization10.1016/j.paerosci.2008.11.001 ↗

23. A Gaussian process regression reduced order model for geometrically nonlinear structures10.1016/j.ymssp.2022.109720 ↗

24. Structural design and material comparison for aircraft wing box beam panel10.1016/j.heliyon.2024.e27403 ↗

25. Cohesive Zone Models: a critical Review of Traction-Separation Relationships across Fracture Surfaces10.1115/1.4023110 ↗

26. Traction-separation law for glass/epoxy composite laminates under mixed mode I/II loading condition considering the effects of fiber bridging

27. Experimental study on effects of asymmetrical stacking sequence on carbon fiber/epoxy filament wound specimens in DCB, ENF, and MMB tests10.1016/j.compstruct.2021.113749 ↗

28. R.K. Joki, Cohesive zone model for mode I and mode II delamination, DACOMAT Project Deliverable D1.2, 2019.

29. Tensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning10.1051/matecconf/201815705014 ↗

30. D14 Committee, Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding, ASTM D5868-01R23. https://doi.org/10.1520/D5868-01R23.10.1520/D5868-01R23 ↗

31. Enhancement of tensile strength of embedded parts in carbon fiber-reinforced plastic/aluminum honeycomb sandwich structures for vehicle10.1016/j.compstruct.2016.06.022 ↗

32. Analytical and numerical evaluation of the relationship between elongation calibration function and cyber standard tensile tests for ductile materials10.1016/j.matdes.2025.113851 ↗

33. D30 Committee, Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM D3039/D3039M-14. https://doi.org/10.1520/D3039_D3039M-14.10.1520/D3039_D3039M-14 ↗

34. E28 Committee, Test Methods for Tension Testing of Metallic Materials, ASTM E8/E8M-22. https://doi.org/10.1520/E0008_E0008M-22.10.1520/E0008_E0008M-22 ↗

35. E08 Committee, Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials, ASTM E466-21. https://doi.org/10.1520/E0466-21.10.1520/E0466-21 ↗

36. Characterization of progressive damage behaviour and failure mechanisms of carbon fibre reinforced aluminium laminates under three-point bending10.1016/j.tws.2018.12.002 ↗

37. Determination of forming procedure by numerical analysis and investigation of mechanical properties of steel/CFRP hybrid composites with complicated shapes10.1016/j.compstruct.2016.10.021 ↗

38. D20 Committee, Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM D790-17. https://doi.org/10.1520/D0790-17.10.1520/D0790-17 ↗

39. Effect of pitch distance, row spacing, end distance and bolt diameter on multi-fastened composite joints10.1016/1359-835X(95)00020-3 ↗