A defect-induced property degradation map for high-pressure die-cast aluminum structure based on 3D porosity and mechanical property heterogeneity
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (63)
Show source-provided references
1. An assessment of using aluminum and magnesium on CO2 emission in European passenger cars[J]10.1016/j.jclepro.2019.119120 ↗
2. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications[J]10.1016/j.actamat.2012.10.044 ↗
3. The use of aluminium and magnesium alloys in automotive lightweight technologies[J]10.1007/s12206-023-0712-2 ↗
4. Critical life cycle inventory for aluminum die casting: a lightweight-vehicle manufacturing enabling technology[J]10.1016/j.apenergy.2021.117814 ↗
5. Critical success factors of industry 4.0 in automotive manufacturing industry[J]10.1109/TEM.2020.3017004 ↗
6. Kallas M K. Multi-directional unibody casting machine for a vehicle frame and associated methods: US20190217380A1[P]. 2019-07-18.
7. Alloy development and process innovations for light metals casting[J]10.1016/j.jmatprotec.2022.117606 ↗
8. Progress in integrated die-casting technology for aluminum alloys[J]
9. Progress in integrated die casting of aluminum alloys[J]
10. Vehicle giga-casting Al alloys technologies, applications, and beyond[J]10.1016/j.jallcom.2025.178552 ↗
11. Heterogeneous microstructure and deformation behavior of an automotive grade aluminum alloy[J]10.1016/j.jallcom.2021.159413 ↗
12. Achieving ultrahigh fatigue resistance in AlSi10Mg alloy by additive manufacturing[J]
13. The influence of in-cavity pressure on heat transfer and porosity formation during high-pressure die casting of A380 Alloy[J]10.1007/s11837-020-04341-y ↗
14. Influence of Cu content on the microstructure and mechanical properties of AlSiMnMg alloys during the HVDC process[J]10.1016/j.matchar.2026.116010 ↗
15. Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall castings[J]10.1016/j.jmatprotec.2022.117525 ↗
16. Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys[J]10.1016/j.jmapro.2020.04.071 ↗
17. Influence of pore characteristics and eutectic particles on the tensile properties of Al–Si–Mn–Mg high pressure die casting alloy[J]10.1016/j.msea.2020.139280 ↗
18. Influence of high-speed ram transition position on porosity and mechanical properties of large one-piece die-casting Al-Si-Mn-Mg aluminium alloy[J]10.3390/ma17246169 ↗
19. Numerical simulation of squeeze casting of aluminum alloy flywheel housing with large wall thickness difference and complex shape[J]10.1016/S1003-6326(23)66187-4 ↗
20. Improved defect control and mechanical property variation in high-pressure die casting of a380 alloy by high shear melt conditioning[J]10.1007/s11837-018-3005-y ↗
21. Characterization of externally solidified crystals in a high-pressure die-cast AlSi10MnMg alloy and their effect on porosities and mechanical properties[J]10.1016/j.jmatprotec.2021.117299 ↗
22. The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy[J]10.1016/j.jmst.2020.02.040 ↗
23. Tensile Properties and Deformation Behaviors of a New Aluminum Alloy for High pressure die Casting[J]10.1016/j.jmst.2016.02.013 ↗
24. Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys[J]10.1016/j.matdes.2019.108394 ↗
25. Study of 3D pores and its relationship with crack initiation factors of aluminum alloy die castings[J]10.1007/s11663-019-01550-y ↗
26. Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy[J]10.1016/j.jmst.2018.11.024 ↗
27. On the formation mechanism of the ring-like microstructure of high-pressure die-cast A390 alloy[J]10.1016/j.matchar.2018.04.012 ↗
28. Effect of vacuum on die filling in high pressure die casting: water analog, process simulation and casting validation[J]
29. Clustering characteristics of Fe-rich intermetallics in high vacuum die cast AlSiMgMn alloys with high resolution μ-CT inspection[J]10.1016/j.matchar.2023.113607 ↗
30. Effects of porosity on mechanical properties of castings in high-pressure die-casting process[J]
31. Effect of Zn Addition on the Microstructural Heterogeneity and Mechanical Properties of Vacuum‐Assisted High‐Pressure die Casting Al–Si–Mg–Cu alloys[J]10.1002/adem.202201457 ↗
32. Microstructural evolution and mechanical properties of Al–Si–Cu–(Ge)–(Mg) alloy solidified under high pressure[J]10.1016/j.msea.2021.142065 ↗
33. Unravelling precipitation behavior and mechanical properties of Al–Zn–Mg–Cu alloy[J]10.1016/j.jmst.2024.03.021 ↗
34. Effects of Cu content and heat treatment process on microstructures and mechanical properties of Al−Si−Mg−Mn−xCu cast aluminum alloys[J]10.1016/S1003-6326(23)66431-3 ↗
35. Rensong Huang, Hongfu Yang, Shanju Zheng, 等. The evolution mechanism of the second phase during homogenization of Al-Zn-Mg-Cu aluminum alloy[J]. Materials & Design, 2023, 235: 112395.10.1016/j.matdes.2023.112395 ↗
36. Investigation of the synergistic evolution of mechanical properties governed by composition–process–microstructure coupling in ultra-long flow die-cast aluminum alloys[J]10.1016/j.jmapro.2025.04.084 ↗
37. Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography: a review[J]10.1007/s41230-024-4109-3 ↗
38. Automated optimized parameters for T-distributed stochastic neighbor embedding improve visualization and analysis of large datasets[J]10.1038/s41467-019-13055-y ↗
39. Process uncertainty analysis of stochastic lack-of-fusion defects in laser powder bed fused inconel 718[J]10.1007/s40192-025-00421-6 ↗
40. Improvement in as-cast strength of high pressure die-cast Al–Si–Cu–Mg alloys by synergistic effect of Q-Al5Cu2Mg8Si6 and θ-Al2Cu phases[J]10.1016/j.msea.2020.140612 ↗
41. 等. on the characterization of primary iron-rich phase in a high-pressure die-cast hypoeutectic Al-Si alloy[J]10.1016/j.jallcom.2020.158580 ↗
42. Effect of porosity on strength distribution of microcrystalline cellulose[J]10.1208/s12249-015-0325-x ↗
43. Effect of porosity on mechanical properties of porous tantalum scaffolds produced by electron beam powder bed fusion[J]10.1016/S1003-6326(22)65993-4 ↗
44. Strength prediction of Class G oilwell cement during early ages by electrical conductivity[J]10.1007/s13202-013-0075-9 ↗
45. A micromechanical investigation for the effects of pore size and its distribution on geopolymer foam concrete under uniaxial compression[J]10.1016/j.engfracmech.2019.01.033 ↗
46. Analysing the effect of defects on stress concentration and fatigue life of L-PBF AlSi10Mg alloy using finite element modelling[J]10.1007/s40964-023-00457-0 ↗
47. Realizing a novel friction stir processing-enabled FWTPET process for strength enhancement using firefly and PSO methods[J]10.3390/ma13030728 ↗
48. On the ductile enlargement of voids in triaxial stress fields∗[J]10.1016/0022-5096(69)90033-7 ↗
49. Effect of relatively low levels of porosity on the plasticity of metals and implications for profilometry‐based indentation plastometry[J]10.1002/adem.202200642 ↗
50. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)[J]10.1016/j.msea.2017.08.027 ↗
51. The mechanistic origins of heterogeneous void growth during ductile failure[J]10.1016/j.actamat.2024.119977 ↗
52. Kinetic analysis of pore formation in die-cast metals and influence of absolute pressure on porosity[J]10.1016/j.vacuum.2019.108828 ↗
53. Effect of thermophysical properties on porosity and microstructure of laser welded cast and wrought aluminum alloy dissimilar lap joints[J]10.1016/j.jmrt.2023.08.021 ↗
54. Shrinkage cavities in conical mold castings of aluminum alloy[J]
55. Effect of chemical compositions on tensile behaviors of high pressure die-casting alloys Al-10Si-yCu-xMn-zFe[J]10.1016/j.msea.2016.03.032 ↗
56. Mechanical behavior and failure mechanism of pre-cracked specimen under uniaxial compression[J]10.1016/j.tecto.2017.06.004 ↗
57. Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite[J]10.1016/j.msea.2018.08.034 ↗
58. The stress concentration mechanism of pores affecting the tensile properties in vacuum die casting metals[J]10.3390/ma13133019 ↗
59. On the prediction of ductile fracture by void coalescence and strain localization[J]10.1016/j.jmps.2018.02.002 ↗
60. Void growth and interaction in a structural aluminum alloy: experiments and theory[J]
61. Dong Zhi Sun, Ying Song Ma, Florence Andrieux. Modeling of the Influence of Pore Morphology on Damage Behavior of an Aluminum Die Casting Alloy[J]. Materials Science Forum, 2014, 794-796: 319-324.10.4028/www.scientific.net/MSF.794-796.319 ↗
62. In Situ Investigations on the Ductility of an Al-Si-Mg Casting Alloy[J]10.1007/s11837-011-0231-y ↗
63. On the relationship between internal porosity and the tensile ductility of aluminium alloy die-castings[J]10.1016/j.msea.2020.139107 ↗