Effect of selected rotary-swaging routes on the microstructure, residual stresses, and compressive behavior of boron-modified AZ91
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (44)
Show source-provided references
1. 2003
2. Microstructure of AZ31 and AZ61 Mg alloys prepared by rolling and ECAP
3. Solidification process and hot tearing behaviors of AZ series magnesium alloys10.1088/2053-1591/ab2bc3 ↗
4. TEM study of continuous precipitation in Mg–9 wt%Al–1 wt%Zn alloy10.1016/S1359-6454(00)00004-5 ↗
5. Fracture behavior of AZ91 magnesium alloy10.1016/S0167-577X(00)00041-0 ↗
6. High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures10.1016/j.matlet.2005.01.012 ↗
7. Multiscale model of deformed polycrystals. Hall-Petch problem10.1134/S1029959914010019 ↗
8. Influence of texture on Hall-Petch relationships in an Mg alloy10.1016/j.actamat.2014.08.023 ↗
9. 60 years of Hall-Petch: past to present nano-scale connections10.2320/matertrans.MA201302 ↗
10. Influence of boron addition on the grain refinement and mechanical properties of AZ91 Mg alloy10.1016/j.msea.2009.07.019 ↗
11. Effect of boron on the grain refinement and mechanical properties of as-cast Mg alloy AM5010.3390/ma12071100 ↗
12. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy10.1016/j.optlastec.2015.07.009 ↗
13. Experimental analysis of residual stresses on AlSi10Mg parts produced by means of selective laser melting (SLM)10.1016/j.procir.2016.06.030 ↗
14. Texture and differential stress development in W/Ni-Co composite after rotary swaging10.3390/ma13122869 ↗
15. Texture and residual stress within rotary swaged Cu/Al clad composites10.1016/j.matlet.2018.07.085 ↗
16. Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting10.1080/17452759.2015.1026045 ↗
17. Residual stress measurements on AISI 316L samples manufactured by selective laser melting
18. Texture, deformation twinning and hardening in a newly developed Mg–Dy–Al–Zn–Zr alloy processed with high pressure torsion10.1016/j.matdes.2015.11.062 ↗
19. FEA of plastic flow in AZ63 alloy during ECAP process10.12693/APhysPolA.122.581 ↗
20. Development of fresh and fully recrystallized microstructures through friction stir processing of a rare earth bearing magnesium alloy10.1016/j.msea.2019.138837 ↗
21. Optimizing structure and properties of Al/Cu laminated conductors via severe shear strain10.1016/j.jallcom.2023.170124 ↗
22. Crossing the limits of electric conductivity of copper by inducing nanotwinning via extreme plastic deformation at cryogenic conditions10.1016/j.matchar.2023.113513 ↗
23. Correlating microstrain and activated slip systems with mechanical properties within rotary swaged WNiCo pseudoalloy10.3390/ma13010208 ↗
24. A study of the structure, mechanical properties and corrosion resistance of magnesium alloy WE43 after rotary swaging10.1007/s11041-018-0269-3 ↗
25. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
26. Development of microstructure and properties within oxide dispersion strengthened steel directly consolidated by hot rotary swaging10.1016/j.matlet.2023.135276 ↗
27. Effect of rotary swaging on microstructure and mechanical properties of an AZ31 magnesium alloy10.1002/adem.201900596 ↗
28. Effect of hot rotary swaging and subsequent annealing on microstructure and mechanical properties of magnesium alloy WE4310.1007/s11041-019-00355-9 ↗
29. Improving the mechanical properties of Mg-5Al-2Ca-1Mn-0.5Zn alloy through rotary swaging10.3390/ma16124489 ↗
30. Effect of extrusion and rotary swaging on the microstructural evolution and properties of Mg-5Li-5.3Al-0.7Si alloy10.1016/j.msea.2023.145627 ↗
31. Achieving high strength in Mg-0.7Sm-0.3Zr Alloy via room-temperature rotary swaging: radial gradient microstructure and grain refinement mechanisms10.3390/ma18133199 ↗
32. Nano-gradient materials prepared by rotary swaging10.3390/nano11092223 ↗
33. Fatigue in an AZ31 alloy subjected to rotary swaging10.3390/ma15217541 ↗
34. Microstructures and mechanical properties of pure Mg processed by rotary swaging10.1016/j.matdes.2014.05.057 ↗
35. Twist channel multi-angular pressing (TCMAP) as a new SPD process: Numerical and experimental study10.1016/j.msea.2014.06.079 ↗
36. Residual stress distribution in a copper-aluminum multifilament composite fabricated by rotary swaging10.3390/ma16052102 ↗
37. Treatment of spatial resolution effects in neutron residual strain scanning10.1016/j.physb.2018.01.013 ↗
38. Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls10.1007/BF01337948 ↗
39. Zur Berechnung der vielkristallinen Elastizitäts-konstanten aus den Werten des Einkristalls
40. Severe plastic deformation: simple shear versus pure shear10.1016/S0921-5093(02)00066-7 ↗
41. Deformation behaviour of Cu-Al clad composites produced by rotary swaging
42. Comparative analysis of plastic flow and grain refinement in pure aluminium subjected to simple shear-based severe plastic deformation processing10.2320/matertrans.MD201113 ↗
43. Deformation behavior of multilayered Al–Cu clad composite during cold-swaging10.1016/j.matdes.2015.10.145 ↗
44. Structural phenomena introduced by rotary swaging: a review10.3390/ma17020466 ↗