Effecting rate-dependent behavior with friction based geometrical design
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (28)
Show source-provided references
1. Mechanical metamaterials and beyond10.1038/s41467-023-41679-8 ↗
2. Tuning stiffness of mechanical metamaterial unit cells via transitions to second-order RIGID and pre-stressed states10.1039/D4SM01318B ↗
3. Design and manufacturing of a metal-based mechanical metamaterial with tunable damping properties10.3390/ma15165644 ↗
4. One-degree-of-freedom mechanical metamaterials with arbitrary prescribability and rapid reprogrammability of force–displacement curves10.34133/research.0715 ↗
5. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading10.1016/j.actamat.2016.05.054 ↗
6. Rate-dependent behaviour of additively manufactured topology optimised lattice structures10.1016/j.tws.2024.111710 ↗
7. Strain rate–dependent mechanical metamaterials10.1126/sciadv.aba0616 ↗
8. Elastodynamical mechanism of rate-dependent friction10.1046/j.1365-246x.2002.01582.x ↗
9. Theory of rubber friction and contact mechanics10.1063/1.1388626 ↗
10. The auxetic friction cell: towards programming strain rate dependency and energy dissipation into mechanical metamaterials
11. Ueber innere reibung fester körper, insbesondere der metalle10.1002/andp.18922831210 ↗
12. The symmpact: a direct-impact hopkinson bar setup suitable for investigating dynamic equilibrium in low-impedance materials10.1007/s11340-021-00785-8 ↗
13. “Dynamic tensile behaviour and adiabatic heating of wrought and additively manufactured Ti6Al4V”. En
14. Investigation into the dynamic mechanical properties of selective laser melted Ti-6Al-4V alloy at high strain rate tensile loading10.1016/j.msea.2019.01.010 ↗
15. On the calculation of a dry friction coefficient10.1002/pamm.201900407 ↗
16. Physical analysis of the state- and rate-dependent friction law. II. dynamic friction
17. Coulombic friction in metamaterials to dissipate mechanical energy10.1016/j.eml.2020.100847 ↗
18. An experimental study of friction at high sliding velocities10.1016/j.wear.2004.03.017 ↗
19. Friction experiments for titanium alloy tribopairs sliding in dry conditions: sub-surface and surface analysis10.1016/j.triboint.2012.04.007 ↗
20. Adhesive wear of a Ti6Al4V tribopair for a fast friction contact10.1016/j.wear.2014.08.001 ↗
21. Influence of 3D-printing on the behaviour of Ti6Al4V in high-speed friction10.1016/j.triboint.2020.106557 ↗
22. A simplified design for a split-hopkinson tension bar with long pulse duration
23. A constant acoustic impedance mount for sheet-type specimens in the tensile split-hopkinson bar
24. Meyers · 1994
25. The area of contact between stationary and moving surfaces
26. 3D-printed mechanical metamaterials with high energy absorption10.1002/admt.201800419 ↗
27. Effect of process parameters on surface integrity in laser powder bed fusion of Ti-6Al-4V alloy
28. Correlations in LPBF-fabricated Ti6Al4V: influence of laser power and scanning speed on microstructure and mechanical performance10.1016/j.rineng.2026.109122 ↗