Interfacial characteristics and mechanical properties of the WC/γ-Fe interface in WC/SS 316L composites fabricated by laser powder bed fusion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Impact toughness of LPBF 316L stainless steel below room temperature10.1016/j.msea.2024.147189 ↗
2. First-principle and experimental investigation into the interfacial characters of Ti-doped ZTA and high chromium cast iron10.1016/j.ceramint.2024.08.368 ↗
3. Theoretical prediction on interfacial bonding and strengthening mechanism of polymorphic ZrO2/Fe interfaces10.1016/j.physb.2024.416871 ↗
4. New perspectives in hardmetal abrasion simulation10.1016/j.wear.2017.01.038 ↗
5. Wear mechanisms of diamond-containing hardmetals in comparison with diamond-based materials10.1016/j.ijrmhm.2017.10.013 ↗
6. Phase reactions and chemical stability of ceramic carbide and solid lubricant particulate additions within sintered high speed steel matrix10.1179/pom.1993.36.4.267 ↗
7. Investigation on the WC/Cu interfacial bonding properties: first-principles prediction and experimental verification10.1016/j.ijrmhm.2022.105872 ↗
8. Microstructure evolution mechanisms endowing high compression strength assisted by stacking fault-twin synergy in TiC/TC4 alloy nanocomposites prepared by laser powder bed fusion under hot isostatic pressing10.1016/j.msea.2025.147789 ↗
9. Effect of directional energy deposition of dual-scale WC particles on the anti-wear properties of 316L10.1016/j.apsusc.2025.162441 ↗
10. High-performance 316L stainless steel composites: tailoring microstructure and mechanics with WC reinforcement via selective laser melting10.1007/s42243-025-01636-9 ↗
11. Effects of WC particles on microstructure and mechanical properties of 316L steel obtained by laser melting deposition10.1016/j.ceramint.2022.03.324 ↗
12. Effects of TiC addition on the interface stability, microstructure, and mechanical properties of IN718 fabricated by laser direct metal deposition: a combined experimental, DFT and MD study10.1016/j.intermet.2024.108268 ↗
13. First-principles study of polar Al/TiN(1 1 1) interfaces10.1016/j.actamat.2004.04.022 ↗
14. Structure and interfacial properties of η-Al5Fe2/Fe heterogeneous interface: first principles calculation and experimental research10.1016/j.jallcom.2024.173497 ↗
15. Revealing the electronic characteristics and fracture mechanism of TiC(1 1 1)/α-Ti(0 0 0 1) interfaces from a first principles investigation
16. Revealing the atomic-scale structure and the fracture mechanism of the α-Al2O3/γ-Fe ceramic-metal interface10.1016/j.jallcom.2021.161163 ↗
17. Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study10.1016/j.scriptamat.2020.08.021 ↗
18. First-principles study on interfacial bonding between LPBF-processed 316 stainless steel matrix and WC reinforcement10.1016/j.ijrmhm.2025.107560 ↗
19. First-principles study of the tensile and fracture of the Al/TiN interface10.1016/j.commatsci.2006.05.017 ↗
20. Effects of transition elements additions on interfacial properties of Al (1 1 1)/B4C (0 0 0 1) interface based on first-principles study10.1016/j.jpcs.2024.112360 ↗
21. First-principles calculations on the electronic structure and bonding nature of TaN(1 1 1)/TiN(1 1 1) interface10.1016/j.jallcom.2017.05.033 ↗
22. Preparation of 316L stainless steel/WC gradient layered structures with excellent strength-elongation synergy using laser powder bed fusion10.1016/j.jmapro.2024.11.093 ↗
23. Effects of heat treatment on microstructure and mechanical properties of Re/Inconel 718 composites fabricated by laser powder bed fusion10.1016/j.jmrt.2025.12.189 ↗
24. Plastic deformation behavior and strengthening mechanism of SLM 316L reinforced by micro-TiC particles10.1016/j.msea.2023.145557 ↗
25. Deformation strengthening mechanism of in situ TiC/TC4 alloy nanocomposites produced by selective laser melting10.1016/j.compositesb.2021.109305 ↗
26. Deformation faulting and dislocation-cell refinement in a selective laser melted 316L stainless steel10.1016/j.ijplas.2022.103346 ↗
27. The cellular boundary with high density of dislocations governed the strengthening mechanism in selective laser melted 316L stainless steel10.1016/j.msea.2020.140279 ↗
28. In-situ TEM investigation of fracture process in an Al–Cu–Mg alloy10.1016/j.msea.2013.08.013 ↗
29. Cosintering of powder injection molding parts made from ultrafine WC-Co and 316L stainless steel powders for fabrication of novel composite structures10.1007/s11661-009-0045-5 ↗
30. Investigation of M6C and M7C3 carbides in SiMo ductile cast iron alloyed with Al and Cr10.1016/j.jallcom.2025.179480 ↗
31. Interfacial structure of WC-Fe metal-matrix composite (WC/Fe3W3C and Fe/Fe3W3C) stability, electronic and mechanical properties from first-principles calculations
32. Wear modes in slurry jet erosion of tungsten carbide hardmetals: their relationship with microstructure and mechanical properties10.1016/j.ijrmhm.2014.07.036 ↗
33. Fracture in ceramic-reinforced metal matrix composites based on high-speed steel10.1023/A:1004303609990 ↗