Abnormal grain growth behavior and mechanism of longitudinal welds in 2196 Al-Cu-Li extrusions with different original microstructures
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (59)
Show source-provided references
1. Microstructural evolution and mechanical properties of the rapidly-solidified and hot-extruded 2196 Al-Li alloy
2. Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions10.1016/j.jmapro.2020.09.063 ↗
3. Formation mechanism and prediction model for peripheral coarse grain of high-strength aluminum alloy thermoplastic forming component: a case study on 2195 Al-Li alloy extrusion profile10.1016/j.jmatprotec.2025.118776 ↗
4. Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: a review10.1016/j.jare.2017.12.004 ↗
5. Microstructural, chemical, and mechanical characterization of extruded Al-Cu-Li rods10.1016/j.matchar.2023.113048 ↗
6. Influence of solution treatment on surface recrystallization and age-hardening response of extruded 2196 Al-Li alloy
7. Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles10.1016/j.jmatprotec.2016.05.024 ↗
8. Analysis of the structure and resulting mechanical properties of aluminium extrusions containing a charge weld interface10.1016/j.jmatprotec.2015.09.013 ↗
9. Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds10.1016/j.jmatprotec.2017.04.030 ↗
10. Optimization of numerical parameters and microstructure evolution on 2195 Al-Li alloy extrusion process10.1016/j.jmrt.2023.09.122 ↗
11. Intermediate annealing treatment as an effective tool for suppression of abnormal grain growth at longitudinal weld of 2196 Al-Cu-Li profile10.1016/j.vacuum.2023.112656 ↗
12. Effects of cold rolling pre-strain on abnormal grain growth behavior in longitudinal welds of 2196 Al-Cu-Li profiles
13. Suppression of abnormal grain growth in friction-stir welded aluminum by pre-strain rolling: limitation of the approach10.1016/j.msea.2021.142388 ↗
14. A quasi-in-situ EBSD study on abnormal grain growth in 2219 aluminum alloy friction stir welded joints during post-weld heat treatment10.1016/j.matdes.2024.113386 ↗
15. Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments10.1016/j.msea.2021.140901 ↗
16. Effect of pre-weld solution treatment and post-weld rapid heat treatment on abnormal grain growth in friction-stir weld joints: a quasi-in-situ EBSD study
17. New insight into the phenomenon of the abnormal grain growth in friction-stir welded aluminum10.1016/j.matlet.2021.130407 ↗
18. Effects of abnormal grain growth at longitudinal weld on the aging behavior and mechanical properties of 2196 Al-Cu-Li alloy profile10.1016/j.matdes.2021.110043 ↗
19. Effect of a novel intermediate heat treatment process on abnormal grain growth in 2219 aluminum alloy friction stir welds10.1016/j.msea.2023.145604 ↗
20. Microstructure evolution and mechanical properties of as-annealed and solution treated Al-Cu-Li alloy 2195 under dynamic compression10.1016/j.jmatprotec.2022.117516 ↗
21. Enhancing strength-ductility synergy in an extruded Al-Cu-Li-Mg-Ag alloy via homogeneous GP zones and dislocation configuration10.1016/j.matdes.2024.112766 ↗
22. Enhancing solidification cracking resistance in high-strength Al-Li alloys via strategic light rare earth alloying: an integrated experiment-simulation approach10.1016/j.matdes.2025.114826 ↗
23. Mechanisms of abnormal grain growth in friction-stir-welded aluminum alloy 6061-T610.1016/j.matchar.2022.112473 ↗
24. Mechanistic insights into abnormal grain growth suppression in friction stir welded 7075-T651 aluminum alloys through variation in tool rotational speed
25. Analysis of abnormal grain growth in 6061 aluminum alloy during high-temperature solution treatment following forging10.1016/j.msea.2025.148252 ↗
26. Microstructure evolution of 5052 aluminum alloy after electromagnetic-driven stamping following different heat treatment conditions10.1016/j.jmrt.2024.03.049 ↗
27. Effect of strain and dispersoids on abnormal grain growth, precipitation behavior and mechanical properties at longitudinal weld in Al-Li alloy profile10.1016/j.jmatprotec.2023.118216 ↗
28. Pre-strain rolling as an effective tool for suppression of abnormal grain growth in friction-stir welded 6061 aluminum alloy10.1016/j.msea.2018.07.026 ↗
29. A quasi-in-situ EBSD study on the effect of abnormal grain growth on mechanical properties of the friction-stir welds of 2219 aluminum alloy
30. Mechanical properties of base metal and heat-affected zone in friction-stir-welded AA6061-T6 at ultra-low temperature of 20K10.1016/j.jmrt.2024.06.165 ↗
31. A study on peripheral grain structure evolution of an AA7050 aluminum alloy with a laboratory-scale extrusion setup10.1007/s11665-019-04208-7 ↗
32. Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy10.1016/j.corsci.2020.109201 ↗
33. Abnormal grain growth behavior and mechanism of 6005A aluminum alloy extrusion profile10.1016/j.jmst.2023.02.013 ↗
34. Experimental investigation and numerical prediction of the peripheral coarse grain (PCG) evolution during the extrusion of different AA6082 aluminum alloy profiles10.1016/j.matchar.2024.113723 ↗
35. Pre-strain effect on the abnormal grain growth for aircraft 2219 aluminium alloy under indirect hot forming condition10.1016/j.jmrt.2025.05.201 ↗
36. Stress relaxation inhibits recrystallization and grain growth in deformed Al-Cu-Li alloys10.1016/j.jallcom.2025.181355 ↗
37. The effect of die bearing geometry on surface recrystallization during extrusion of an Al-Mg-Si-Mn alloy10.1007/s11661-019-05437-0 ↗
38. A finite element coupled visco-plastic self-consistent simulation to predict micro-texture and anisotropy evolution during single point incremental forming in Al-Li alloy10.1016/j.jmatprotec.2022.117834 ↗
39. Investigation of the skin contamination predictability by means of QForm UK extrusion code10.21741/9781644902479-59 ↗
40. Effects of secondary phase and coarse grain defects on mechanical behavior of near-equiatomic Al alloy during extrusion at different temperatures and speeds10.1016/j.jmrt.2025.02.186 ↗
41. Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process10.1016/j.jmatprotec.2019.116348 ↗
42. Metadynamic recrystallization in A5083 aluminum alloy with homogenized and as-extruded initial microstructures10.1016/j.msea.2022.142789 ↗
43. Thermal stability of SPD-processed aluminum alloys-Internal friction as an indication for recovery, recrystallization and abnormal grain growth10.1016/j.jmrt.2022.01.149 ↗
44. The effect of solute on discontinuous dynamic recrystallization10.1016/j.actamat.2012.08.021 ↗
45. Influence of homogenization treatment on microstructure and recrystallization behavior of 2195 Al–Li alloy10.1016/S1003-6326(23)66257-0 ↗
46. Review on role of intermetallic and ceramic particles in recrystallization driving force and microstructure of wrought Al alloys10.1016/j.jmrt.2023.10.098 ↗
47. Enhancing ultrahigh-strength aluminum alloys via TiC nanoparticle-pinning effect in friction rolling additive manufacturing10.1016/j.jmapro.2025.03.003 ↗
48. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach10.1016/j.ijplas.2020.102710 ↗
49. Modeling of recrystallization behaviour of AA6xxx aluminum alloy during extrusion process10.1016/S1003-6326(24)66600-8 ↗
50. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy10.1016/j.matdes.2022.111135 ↗
51. Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al-Cu-Li alloy10.1016/j.actamat.2014.04.046 ↗
52. Modelling recrystallization after hot deformation of aluminium10.1016/1359-6454(96)00078-X ↗
53. Hot deformation mechanisms of a solution-treated Al-Li-Cu-Mg-Zr alloy10.1007/BF02595440 ↗
54. Dislocation models of crystal grain boundaries10.1103/PhysRev.78.275 ↗
55. A dislocation-based model for the substructure evolution and flow stress of aluminum alloys during high-temperature compression10.1016/j.jmrt.2025.02.132 ↗
56. A read-shockley model for high-angle grain boundaries10.1016/0036-9748(89)90348-7 ↗
57. Humphreys · 2004 · 167
58. Numerical investigation of the surface recrystallization during the extrusion of a AA6082 aluminum alloy under different process conditions10.1007/s00170-023-12397-8 ↗
59. Analysis on exceptional cryogenic mechanical properties of AA2219 alloy FSW joints in multi-scale10.1016/j.msea.2022.143489 ↗