Quenching-partitioning-tempering (Q-P-T) steels: Microstructural design, interface-mediated deformation, and mechanical-property synergy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (100+)
Show source-provided references
1. Carbon neutrality orientates the reform of the steel industry10.1038/s41563-022-01370-7 ↗
2. Current trends in metallic materials for body panels and structural members used in the automotive industry10.3390/ma17030590 ↗
3. Progress and perspective of ultra-high-strength martensitic steels for automobile10.3390/met12122184 ↗
4. Development trend of china’s automobile industry and the opportunities and challenges of steels for automobiles
5. A comprehensive overview of high strength and toughness steels for automobile based on QP process10.1016/j.jmrt.2023.09.210 ↗
6. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
7. Heterostructured metallic structural materials: research methods, properties, and future perspectives10.1002/adfm.202410521 ↗
8. High-strength, low-alloy steels10.1126/science.208.4446.862 ↗
9. Improving sustainability with simpler alloys10.1126/science.aaw9905 ↗
10. The enhancement of ductility in high-strength steels
11. D. Webster, INCREASING THE TOUGHNESS OF AFC 77 BY CONTROL OF RETAINED AUSTENITE CONTENT, AUSFORMING, AND STRAIN AGING, 1968.
12. The mechanism of high ductility for novel high-carbon quenching–partitioning–tempering martensitic steel10.1007/s11661-015-3021-2 ↗
13. Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite10.1016/j.scriptamat.2018.02.035 ↗
14. Dislocations across interphase enable plain steel with high strength-ductility10.1016/j.scib.2021.02.032 ↗
15. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
16. Hsu · 2007 · 2283
17. Quenching–partitioning–tempering process for ultra-high strength steel10.1179/174951508X358400 ↗
18. Novel ultrahigh-strength nanolath martensitic steel by quenching–partitioning–tempering process10.1557/JMR.2009.0029 ↗
19. A new effect of retained austenite on ductility enhancement in high-strength quenching–partitioning–tempering martensitic steel10.1016/j.msea.2011.07.049 ↗
20. Hirth · 1972
21. A new understanding of transformation induced plasticity (TRIP) effect in austenitic steels10.1016/j.msea.2022.143742 ↗
22. Retaining ductility10.1038/nmat1141 ↗
23. Improvement of fatigue strength of maraging steel by shot peening10.1080/10426910903386055 ↗
24. S. Suresh, Fatigue of materials, Cambridge university press1998.10.1017/CBO9780511806575 ↗
25. Ultra-long cycle fatigue of high-strength carbon steels part I: review and analysis of the mechanism of failure10.1016/S0921-5093(03)00135-7 ↗
26. Study on fatigue property of a new 2.8 GPa grade maraging steel10.1016/j.msea.2010.02.002 ↗
27. Optimizing the fatigue strength of 18Ni maraging steel through ageing treatment10.1016/j.msea.2017.09.107 ↗
28. Current status and prospects of fatigue performance for 300M steel by single vacuum process for landing gear of commercial aircraft
29. Ultrastrong steel strengthened by multiple shearable nanostructures10.1016/j.jmst.2023.05.001 ↗
30. Effect of microstructure on strength and toughness of heat-treated low alloy structural steels10.1007/BF02665319 ↗
31. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
32. Effect of substructure on toughness of lath martensite/bainite mixed structure in low-carbon steels10.1016/S1006-706X(10)60168-9 ↗
33. Effect of quenching temperature on martensite multi-level microstructures and properties of strength and toughness in 20CrNi2Mo steel10.1016/j.msea.2016.08.065 ↗
34. Ultrahigh Charpy impact toughness (∼ 450J) achieved in high strength ferrite/martensite laminated steels10.1038/srep41459 ↗
35. The important role of martensite laths to fracture toughness for the ductile fracture controlled by the strain in EA4T axle steel10.1016/j.msea.2017.03.110 ↗
36. The relationship between strength and toughness in tempered steel: trade‐off or invariable?10.1002/adem.201801116 ↗
37. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
38. Impact toughness and fracture propagation mechanism of NiAl precipitation-strengthened HSLA steels10.1016/j.matdes.2024.112927 ↗
39. Nanostructural metallic materials: structures and mechanical properties10.1016/j.mattod.2020.04.005 ↗
40. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment10.1016/S1359-6454(02)00594-3 ↗
41. Plastic strain-induced grain refinement at the nanometer scale in copper10.1016/j.actamat.2006.07.013 ↗
42. Wear and corrosion properties of a low carbon steel processed by means of SMAT followed by lower temperature chromizing treatment10.1016/j.surfcoat.2006.05.019 ↗
43. 8.14-Surface nanocrystallization (SNC) of materials and its effect on mechanical behavior, comprehensive structural integrity
44. Ultrahigh fatigue strength of gradient nanostructured plain steel10.1016/j.scriptamat.2024.116243 ↗
45. Enhancing impact toughness of QPT plain steels via multiscale design: resolving the strength-toughness balance10.1016/j.scriptamat.2025.116890 ↗
46. Effect of interfacial Mn partitioning on carbon partitioning and interface migration during the quenching and partitioning process10.1007/s11661-017-4121-y ↗
47. Thermo-kinetic design of retained austenite in advanced high strength steels10.1016/j.actamat.2018.04.040 ↗
48. Strengthening mechanism of complex transition carbide (FexC) in quenching–partitioning–tempering steels
49. Elastoplastic phase-field study of local stress and plastic deformation due to carbide precipitation in high-and low-carbon quenching–tempering steels10.1007/s11661-025-07903-4 ↗
50. Revealing carbide precipitation effects and their mechanisms during quenching-partitioning-tempering of a high carbon steel: experiments and Modeling10.1016/j.actamat.2021.117176 ↗
51. Universality of quenching-partitioning-tempering local equilibrium model10.1016/j.jmst.2021.12.021 ↗
52. Multi-interface migration mechanism induced by carbide precipitation during the quenching-partitioning-tempering process in a high-carbon steel10.1016/j.ijplas.2024.103928 ↗
53. Effect of novel QPT and traditional QT processes on the microstructure and mechanical properties of martensitic steels with different carbon content
54. Strengthening and toughening mechanisms of quenching–partitioning–tempering (Q–P–T) steels10.1016/j.jallcom.2012.02.016 ↗
55. Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: a critical assessment10.1016/j.actamat.2007.08.051 ↗
56. A novel microstructural design and heat treatment technique based on gradient control of carbon partitioning between austenite and martensite for high strength steels10.1007/s11431-013-5206-5 ↗
57. Optimising the strength-ductility-toughness combination in ultra-high strength quenching and partitioning steels by tailoring martensite matrix and retained austenite10.1016/j.ijplas.2020.102851 ↗
58. Mechanism exploration of an ultrahigh strength steel by quenching–partitioning–tempering process10.1016/j.msea.2011.08.050 ↗
59. A new effect of retained austenite on ductility enhancement of low carbon QPT steel10.3724/SP.J.1037.2012.00042 ↗
60. A new effect of retained austenite on ductility enhancement in high strength bainitic steel10.1016/j.msea.2012.05.042 ↗
61. On the role of chemical heterogeneity in carbon diffusion during quenching and partitioning10.1016/j.actamat.2024.119902 ↗
62. Influence of silicon on cementite precipitation in steels10.1179/174328408X275973 ↗
63. Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel10.1016/j.actamat.2023.118742 ↗
64. Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe–0.6 mass% C martensite10.1016/j.actamat.2007.05.023 ↗
65. Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography10.1016/j.actamat.2018.01.022 ↗
66. Thermodynamic mapping of austenite decomposition’s approach toward equilibrium in Fe–C–Mn at 700 C10.1016/j.actamat.2015.01.001 ↗
67. Influences of manganese content and heat treatment on mechanical properties of precipitation-strengthened steels10.1016/j.msea.2022.142724 ↗
68. A heat-resistant steel with excellent high-temperature strength-ductility based on a combination of solid-solution strengthening and precipitation hardening10.1016/j.msea.2024.147218 ↗
69. Review on niobium application in microalloyed steel10.1007/s42243-022-00789-1 ↗
70. Quenching and partitioning martensite—a novel steel heat treatment10.1016/j.msea.2006.02.133 ↗
71. Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques10.1016/j.actamat.2015.01.024 ↗
72. The Mechanism of high strength-ductility steel produced by a novel Quenching-Partitioning-Tempering process and the mechanical stability of retained austenite at elevated temperatures10.1007/s11661-011-0929-z ↗
73. A general equation prescribing extend of austenite-martensite transformation in pure Fe-C alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
74. In situ austenite–martensite interface mobility study during annealing10.1016/j.actamat.2015.02.040 ↗
75. e Letter
76. High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching–partitioning–tempering process10.1016/j.msea.2011.07.008 ↗
77. Carbide characterization in a Nb-microalloyed advanced ultrahigh strength steel after quenching–partitioning–tempering process10.1016/j.msea.2010.02.026 ↗
78. Elucidating the effect of Mn partitioning on interface migration and carbon partitioning during Quenching and Partitioning of the Fe-C-Mn-Si steels: modeling and experiments10.1016/j.actamat.2017.11.025 ↗
79. Mechanical behavior and martensitic transformation of an Fe–Mn–Si–Al–Nb alloy10.1016/j.msea.2006.02.150 ↗
80. EBSD investigation of the crystallographic features of deformation-induced martensite in stainless steel10.1016/j.jmst.2020.08.023 ↗
81. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys10.1016/j.msea.2004.01.059 ↗
82. Z. Guo, Y. Rong, S. Chen, H.X.Z. TY, Energy Consideration of the fcc (γ)→ hcp (ε) Martensitic Transformation in Fe–Mn–Si Based Alloys, Materials Transactions, JIM 40(4) (1999) 328-334.10.2320/matertrans1989.40.328 ↗
83. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
84. Measurement of microstructural parameters of nanocrystalline Fe–30 wt.% Ni alloy produced by surface mechanical attrition treatment10.1016/j.jallcom.2008.06.136 ↗
85. Deformation-induced martensite in austenitic stainless steels: a review10.1007/s43452-020-00130-1 ↗
86. Room-temperature deformation behavior of directionally solidified multiphase Ni-Fe-Al alloys10.1007/s11661-997-0066-x ↗
87. Slip transfer and dislocation nucleation processes in multiphase ordered Ni-Fe-Al alloys10.1007/s11661-999-0152-3 ↗
88. Mittemeijer · 2010
89. Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel10.1016/j.actamat.2015.01.013 ↗
90. Davis · 1990 · vol. 1
91. The principle and mechanism of enhancement of both strength and ductility of martensitic steels by carbon
92. Effect of precursor microstructure on retained austenite and mechanical property of low carbon steels with IQ&P treatments
93. Thermomechanical deformation-induced grain boundary segregation of Sn in advanced high-strength steels10.1016/j.jmst.2025.05.020 ↗
94. Heterostructure mediated high strength and large ductility in novel medium-Mn steels with low Mn content10.1016/j.actamat.2024.120092 ↗
95. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation10.1016/j.actamat.2010.09.042 ↗
96. Alloying-element interactions with austenite/martensite interface during quenching and partitioning of a model Fe-C-Mn-Si alloy10.1016/j.scriptamat.2018.11.012 ↗
97. Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5 Si-0.3 C alloy: a transition in kinetics and morphology10.1016/j.actamat.2018.05.035 ↗
98. Influence of Si on the microstructure and C redistribution in martensitic steels10.1016/j.matdes.2023.111875 ↗
99. Unraveling the effects of Nb interface segregation on ferrite transformation kinetics in low carbon steels10.1016/j.actamat.2021.117081 ↗
100. Segregation mechanism of alloying elements at the fcc-Fe/bcc-Fe interface and its effects on carbon diffusion across the boundary10.1016/j.jpcs.2023.111657 ↗