Polymer film bridging for enhanced flexural strength and waterproofing in ultra-low dosage styrene-acrylate modified cement mortars
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Study on high supplementary cementitious materials content cement: design and analysis based on response surface method10.1016/j.conbuildmat.2025.140398 ↗
2. A review of novel self-healing concrete technologies
3. Combined chloride-sulfate attack and subsequent damage from salt-freeze-thaw cycles on high durability concrete
4. Sustainable design of rubberised geopolymer-based ultra-high performance concrete using waste tyres: Mechanical, microstructural, and environmental evaluation10.1016/j.conbuildmat.2025.144477 ↗
5. Thermal management and retardation kinetics of cementitious systems modified with styrene-acrylate polymer additives
6. Advancing an already high-performance smart building with model predictive control: Multi-layer optimization under forecast uncertainty in a real building case10.1016/j.apenergy.2025.126999 ↗
7. Complex emulsion template-UV-photopolymerization synergistic approach for constructing sodium carbonate microcapsules toward efficient self-healing oil well cement10.1016/j.cemconcomp.2025.106367 ↗
8. A review on nanomaterials and polymers modified cementitious materials with high performances
9. Synergistic and antagonistic interactions between styrene-acrylic emulsion and silica fume in cement composites: Mechanisms and performance10.1016/j.conbuildmat.2025.144594 ↗
10. Study on the waterproofing and impermeability performance of mortar based on OPC-CSA-anhydrite cementitious system modified by triethoxyvinylsilane-styrene-acrylate emulsion10.1016/j.conbuildmat.2025.144229 ↗
11. Effect of latex polymers with different functional monomers on time-dependent rheological properties of fresh cement pastes10.1016/j.conbuildmat.2025.142710 ↗
12. Interfacial bonding properties of styrene-butadiene rubber and ethylene vinyl acetate emulsion-modified OPC–CAC–G repair mortar10.1016/j.conbuildmat.2023.130747 ↗
13. Polymer-modified mortar flexibility of the masonry-concrete structure interface
14. Integral hydrophobic concrete without using silane10.1016/j.conbuildmat.2019.116678 ↗
15. A Review on Recent Application of Acrylate Emulsion/Resin in Cement Additives10.1002/pat.70218 ↗
16. Multifunctional high fatigue resistant silica aerogel reinforced by polyurethane via ambient pressure drying for improved thermal and sound insulation, water proofing, and vapor permeability10.1016/j.conbuildmat.2024.139826 ↗
17. Application potential of redispersible styrene-acrylic ester copolymer powder-modified cement mortar to steel with anticorrosive coating10.1016/j.jobe.2025.114041 ↗
18. Development of a hydrophobic cement mortar with controllable strength: Preparation and micro-mechanism analysis10.1016/j.conbuildmat.2023.133216 ↗
19. Improvement of the durability of cement-based material through surface modification with nano-engineered releasing agents10.1016/j.conbuildmat.2022.128480 ↗
20. Study of a new hydrophobic coating with CMC as binder and its effect on concrete erosion resistance
21. Effect of waterborne polymer on mechanical properties, carbonation resistance and freeze-thaw resistance of cement mortar10.1016/j.conbuildmat.2025.142922 ↗
22. Long-term salt freeze-thaw resistance of polyvinyl alcohol (PVA) modified mortar: The role of molecular structure10.1016/j.cemconcomp.2025.106159 ↗
23. Synergetic effect of superabsorbent polymer (SAP) and crystalline admixture (CA) on mortar macro-crack healing10.1016/j.conbuildmat.2020.118521 ↗
24. Effects of styrene acrylate emulsion (SAE) on fracture toughness and chloride permeability of high-strength cement-based composites containing CaCO310.1016/j.conbuildmat.2024.135603 ↗
25. Effects of styrene-acrylic emulsion on toughness, volume stability and fiber dispersion of hybrid fibers reinforced ultra-high performance geopolymer concrete10.1016/j.conbuildmat.2025.140930 ↗
26. Effect of styrene acrylic (SA) latex and slag pozzolan on concrete’s mechanical and durability properties, considering the environmental impact and cost10.1007/s41062-025-01946-7 ↗
27. Zwitterionic hydrogels as swelling components for the preparation of cement-based materials with water plugging function
28. Effect of polymerizable ionic surfactant in the acrylic latex additive on advanced properties of Portland cement-based mortars10.1016/j.conbuildmat.2025.142079 ↗
29. Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar10.1016/j.conbuildmat.2018.03.005 ↗
30. Retardation effect of styrene-acrylate copolymer latexes on cement hydration10.1016/j.cemconres.2015.04.014 ↗
31. Effect of curing and compaction on volumetric and mechanical properties of cold-recycled mixture with asphalt emulsion under different cement contents10.1016/j.conbuildmat.2021.123699 ↗
32. A comprehensive study of pumice and mica in geopolymer mortar as GGBFS replacement on mechanical, durability, high-temperature, and sustainability performance10.1016/j.conbuildmat.2025.143410 ↗
33. Influence of Feldspar and Ground Granulated Blast-furnace slag as a partial cement replacement on mechanical properties and thermal durability and environmental impacts of cement mortars
34. Characterisation of magnetic properties in cementitious composites for advanced wireless power transfer systems using magnetic sand, magnetite powder, GGBFS, and silica fume10.1016/j.rineng.2026.109156 ↗
35. Preparation of organic-inorganic styrene-acrylate emulsion and its improvement on the comprehensive performance of mortar
36. Ambient-condition curable high internal phase emulsion as a 3D-printable and scalable porous template10.1016/j.colsurfa.2024.133912 ↗
37. Preparation, Characterization and Evaluation of Some Acrylate Polymers Nanoparticles as Binder to Improving the Physical Properties of Water Based Paints
38. Synthesis, kinetics and characterization of environment friendly waterborne acrylate copolymers10.1016/j.matpr.2020.04.164 ↗
39. Dynamics of hydrogen-bonded end groups in bulk polymers revealed by solid-state NMR spectroscopy relaxation dispersion experiments10.1038/s42004-025-01597-w ↗
40. Synthesis and characterization of acrylic polyols and polymers from soybean oils for pressure-sensitive adhesives10.1039/C5RA04399A ↗
41. Biobased Itaconate Acrylic Pressure-Sensitive Adhesives via Emulsion Polymerization: Sustainable Design for High Peel Resistance10.1021/acsomega.5c03586 ↗
42. Opportunities and Challenges of the Application of Nuclear Magnetic Resonance-Based Cerebrospinal Fluid Metabolomics for Clinical Research10.1002/cmtd.202500082 ↗
43. Precise intermolecular force modulation enables ultra-selective and superfast water transport across polyamide membranes10.1039/D5TA01241D ↗
44. The freeze-thaw stability of flavor high internal phase emulsion and its application to flavor preservation and 3D printing10.1016/j.fochx.2023.100759 ↗
45. Analysis of stability and mechanical properties of SBS/SBR composite modified emulsified asphalt10.1016/j.conbuildmat.2025.143678 ↗
46. The secondary drop formation of nanoparticle/surfactant-stabilized water droplets under non-uniform electric fields10.1016/j.ijmultiphaseflow.2020.103211 ↗
47. Oil-in-water high-internal-phase poly(styrene-acrylate) Pickering emulsions and their applications as waterborne damping coatings10.1016/j.colsurfa.2022.128783 ↗
48. Synthesis and Characterization of Sodium Lignosulfonate-Based Phosphorus-Containing Intermediates and Its Composite Si–P–C Silicone-Acrylic Emulsion Coating for Flame-Retardant Plywood10.1021/acs.langmuir.4c01012 ↗
49. Electrostatic-modulated interfacial crosslinking and waterborne emulsion coating toward waterproof, breathable, and antifouling fibrous membranes10.1016/j.cej.2022.140439 ↗
50. Particle size distribution in mini-emulsion polymerization10.1016/j.crci.2003.07.019 ↗
51. Achieving optimum balance between mechanical properties and gloss of acrylonitrile–styrene–acrylate resin through control of rubber particle size distribution10.1002/pen.27004 ↗
52. Stabilizing strands: Exploring the kinetic stability of polymer-coated emulsions with surface specific spectroscopy10.1016/j.colsurfa.2024.134414 ↗
53. Steric stabilization in emulsion polymerization using oligomeric nonionic surfactants10.1016/S0009-2509(98)00336-4 ↗
54. Multiscale combined techniques for evaluating emulsion stability: A critical review10.1016/j.cis.2022.102813 ↗
55. Effect of Styrene Concentration on Tensile Properties of Styrene-Acrylate Films10.1088/1742-6596/2907/1/012001 ↗
56. Polystyrene-block-poly(n-butyl acrylate)-block-polystyrene Triblock Copolymer Thermoplastic Elastomer Synthesized via RAFT Emulsion Polymerization10.1021/ma101348k ↗
57. Mechanical properties and fractal morphology of high-impact polystyrene/poly(styrene-b-butadiene-b-styrene) blends10.1016/j.polymdegradstab.2005.02.021 ↗
58. J. Dou, G. Zhang, S. Li, C. Tian, C. Ji, C. Zhang, Properties of degraded waste PET-modified styrene-acrylic emulsions for cement slurry materials, Adv. Civ. Eng. 2019 (1) (2019) 4624907.10.1155/2019/4624907 ↗
59. Effect of styrene acrylic latex on the performance of metakaolin blended cement: from hydration to mechanical properties10.1016/j.conbuildmat.2024.137289 ↗
60. Enhancing energy efficiency in buildings, optimization method and building management systems application for lower CO2 emissions10.1016/j.energy.2024.134054 ↗
61. Effect of optimized pore structure on sealing performance of drilling sealing materials in coal mine10.1016/j.conbuildmat.2020.121765 ↗