Atomic and Molecular Structure Regulated In Situ Cross-Linked Polyurethane Gel Electrolyte for High-Performance Lithium Metal Batteries
Source abstract
Abstract
Abstract The incompatibility of conventional electrolytes with high-voltage cathodes and lithium metal anodes limits the performance of lithium metal batteries (LMBs). Here, an in situ cross-linked polyurethane gel electrolyte (G-P3 AR) is designed through atomic and molecular structure regulation. The polyester segments widen the highest occupied molecular orbital–lowest unoccupied molecular orbital gap, extending the electrochemical stability window to 4.97 V for compatibility with NCM811 cathodes. Polyether segments exhibit a lower Li + binding energy, reducing the desolvation barrier and enhancing anode stability. At the atomic level, sp 2 -hybridized boron in the chain extender immobilizes anions (TFSI − and DFOB − ) through Lewis acid–base interactions, raising the Li + transference number to 0.78 and enabling exceptional rate capability (157.7 mAh g −1 at 2 C in the Li||NCM811 cell). Hydrogen bonding between the polymer and solvent restructures the solvation sheath, promoting inorganic-rich interphases. The Li|G-P3 AR|NCM811 cell retains 81.7% capacity after 500 cycles at 0.5 C charge/1 C discharge, demonstrating a rational electrolyte design strategy for high-performance LMBs.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. H. Yang, L. Wang, Y. Li, Z. Zhuo, T. Wu et al., Co-free gradient lithium-rich cathode for high-energy batteries with optimized cyclability. Proc. Natl. Acad. Sci. USA. 121(50), e2412460121 (2024). https://doi.org/10.1073/pnas.241246012110.1073/pnas.2412460121 ↗
2. T. Wu, X. Zhang, Y. Li, H. Du, T. Liu et al., Quantitative identification of dopant occupation in Li-rich cathodes. Adv. Mater. 37(3), 2408543 (2025). https://doi.org/10.1002/adma.20240854310.1002/adma.202408543 ↗
3. M. Bai, X. Tang, M. Zhang, H. Wang, Z. Wang et al., An in-situ polymerization strategy for gel polymer electrolyte Si||Ni-rich lithium-ion batteries. Nat. Commun. 15, 5375 (2024). https://doi.org/10.1038/s41467-024-49713-z10.1038/s41467-024-49713-z ↗
4. T. Wu, X. Liu, X. Zhang, Y. Lu, B. Wang et al., Full concentration gradient-tailored Li-rich layered oxides for high-energy lithium-ion batteries. Adv. Mater. 33(2), 2001358 (2021). https://doi.org/10.1002/adma.20200135810.1002/adma.202001358 ↗
5. F. Makhlooghiazad, L.A. O’Dell, L. Porcarelli, C. Forsyth, N. Quazi et al., Zwitterionic materials with disorder and plasticity and their application as non-volatile solid or liquid electrolytes. Nat. Mater. 21(2), 228–236 (2022). https://doi.org/10.1038/s41563-021-01130-z10.1038/s41563-021-01130-z ↗
6. F. Yu, Y. Mu, M. Han, J. Liu, K. Zheng et al., Electrochemically stable and ultrathin polymer-based solid electrolytes for dendrite-free all-solid-state lithium-metal batteries. Mater. Futur. 4(1), 015101 (2025). https://doi.org/10.1088/2752-5724/ada0cc10.1088/2752-5724/ada0cc ↗
7. H. Zhang, L. Huang, H. Xu, X. Zhang, Z. Chen et al., A polymer electrolyte with a thermally induced interfacial ion-blocking function enables safety-enhanced lithium metal batteries. eScience 2(2), 201–208 (2022). https://doi.org/10.1016/j.esci.2022.03.00110.1016/j.esci.2022.03.001 ↗
8. L. Ye, X. Li, A dynamic stability design strategy for lithium metal solid state batteries. Nature 593(7858), 218–222 (2021). https://doi.org/10.1038/s41586-021-03486-310.1038/s41586-021-03486-3 ↗
9. F. Pei, Y. Huang, L. Wu, S. Zhou, Q. Kang et al., Multisite crosslinked poly(ether-urethane)-based polymer electrolytes for high-voltage solid-state lithium metal batteries. Adv. Mater. 36(49), 2409269 (2024). https://doi.org/10.1002/adma.20240926910.1002/adma.202409269 ↗
10. X. Miao, J. Hong, S. Huang, C. Huang, Y. Liu et al., In situ gel polymer electrolyte with rapid Li+ transport channels and anchored anion sites for high-current-density lithium-ion batteries. Adv. Funct. Mater. 35(1), 2411751 (2025). https://doi.org/10.1002/adfm.20241175110.1002/adfm.202411751 ↗
11. S. Yuan, K. Ding, X. Zeng, D. Bin, Y. Zhang et al., Advanced nonflammable organic electrolyte promises safer Li-metal batteries: from solvation structure perspectives. Adv. Mater. 35(13), 2206228 (2023). https://doi.org/10.1002/adma.20220622810.1002/adma.202206228 ↗
12. C.V. Amanchukwu, Z. Yu, X. Kong, J. Qin, Y. Cui et al., A new class of ionically conducting fluorinated ether electrolytes with high electrochemical stability. J. Am. Chem. Soc. 142(16), 7393–7403 (2020). https://doi.org/10.1021/jacs.9b1105610.1021/jacs.9b11056 ↗
13. X. Hou, T. Li, Y. Qiu, M. Jiang, H. Lin et al., Interfacial chemistry of perfluorinated-anion additives deciphering ether-based electrolytes for sodium-ion batteries. ACS Energy Lett. 9(2), 461–467 (2024). https://doi.org/10.1021/acsenergylett.3c0281110.1021/acsenergylett.3c02811 ↗
14. X. Yi, X. Li, J. Zhong, S. Wang, Z. Wang et al., Unraveling the mechanism of different kinetics performance between ether and carbonate ester electrolytes in hard carbon electrode. Adv. Funct. Mater. 32(48), 2209523 (2022). https://doi.org/10.1002/adfm.20220952310.1002/adfm.202209523 ↗
15. Z. Wang, A. Hu, Y. Yin, W. Xu, Y. Wang et al., Ionization-targeted modulation enables fast-charging and high-temperature lithium-metal batteries. Adv. Funct. Mater. 36(7), e13437 (2026). https://doi.org/10.1002/adfm.20251343710.1002/adfm.202513437 ↗
16. G. Liu, Z. Cao, P. Wang, Z. Ma, Y. Zou et al., Switching electrolyte interfacial model to engineer solid electrolyte interface for fast charging and wide-temperature lithium-ion batteries. Adv. Sci. 9(26), 2201893 (2022). https://doi.org/10.1002/advs.20220189310.1002/advs.202201893 ↗
17. Y. Zhao, T. Zhou, D. Baster, M. El Kazzi, J.W. Choi et al., Targeted functionalization of cyclic ether solvents for controlled reactivity in high-voltage lithium metal batteries. ACS Energy Lett. 8(7), 3180–3187 (2023). https://doi.org/10.1021/acsenergylett.3c0100410.1021/acsenergylett.3c01004 ↗
18. D. Ruan, L. Tan, S. Chen, J. Fan, Q. Nian et al., Solvent versus anion chemistry: unveiling the structure-dependent reactivity in tailoring electrochemical interphases for lithium-metal batteries. JACS Au 3(3), 953–963 (2023). https://doi.org/10.1021/jacsau.3c0003510.1021/jacsau.3c00035 ↗
19. Y. Chen, M. Li, Y. Liu, Y. Jie, W. Li et al., Origin of dendrite-free lithium deposition in concentrated electrolytes. Nat. Commun. 14, 2655 (2023). https://doi.org/10.1038/s41467-023-38387-810.1038/s41467-023-38387-8 ↗
20. Z. Lu, H. Yang, J. Sun, J. Okagaki, Y. Choe et al., Conformational isomerism breaks the electrolyte solubility limit and stabilizes 4.9 V Ni-rich layered cathodes. Nat. Commun. 15, 9108 (2024). https://doi.org/10.1038/s41467-024-53570-110.1038/s41467-024-53570-1 ↗
21. Y. Wang, Z. Li, Y. Hou, Z. Hao, Q. Zhang et al., Emerging electrolytes with fluorinated solvents for rechargeable lithium-based batteries. Chem. Soc. Rev. 52(8), 2713–2763 (2023). https://doi.org/10.1039/d2cs00873d10.1039/d2cs00873d ↗
22. H.K. Bergstrom, B.D. McCloskey, Ion transport in (localized) high concentration electrolytes for Li-based batteries. ACS Energy Lett. 9(2), 373–380 (2024). https://doi.org/10.1021/acsenergylett.3c0166210.1021/acsenergylett.3c01662 ↗
23. C. Gao, Y. Zhou, Y. Huang, S. Wang, X. Ma, Bioinspired vascular bundle structured nanocellulose/PVDF-HFP composite membranes for efficient ion transport and stable all-solid-state lithium batteries. Nano-Micro Lett. 18(1), 254 (2026). https://doi.org/10.1007/s40820-026-02092-010.1007/s40820-026-02092-0 ↗
24. Y. Wang, P. Li, B. Liu, X. Wei, W. Fu et al., Solid polymer electrolytes: ion conduction enhancement and comprehensive frontiers. Mater. Futures 4(4), 042103 (2025). https://doi.org/10.1088/2752-5724/ae0ce310.1088/2752-5724/ae0ce3 ↗
25. H. Yang, L. Zhu, W. Li, Y. Tang, X. Li et al., Lignocellulose-mediated gel polymer electrolytes toward next-generation energy storage. Nano-Micro Lett. 18(1), 84 (2025). https://doi.org/10.1007/s40820-025-01927-610.1007/s40820-025-01927-6 ↗
26. J. Li, X. Zhu, Z. Xu, H. Ren, S. Muhammad et al., Dynamic metal-ligand coordinated self-healing polymer electrolytes for lithium-ion batteries: correlating coordination mechanisms with electrochemical properties. Adv. Funct. Mater. 35(49), e10177 (2025). https://doi.org/10.1002/adfm.20251017710.1002/adfm.202510177 ↗
27. S. Zhang, W. Chen, W. Hao, D. Li, C. Zhang et al., A composite gel polymer electrolyte by incorporating modified POSS endowing inorganic-rich SEI formation and stable cycle life for lithium metal batteries. Chem. Eng. J. 484, 149499 (2024). https://doi.org/10.1016/j.cej.2024.14949910.1016/j.cej.2024.149499 ↗
28. J. Zhu, J. Zhang, R. Zhao, Y. Zhao, J. Liu et al., In situ 3D crosslinked gel polymer electrolyte for ultra-long cycling, high-voltage, and high-safety lithium metal batteries. Energy Storage Mater. 57, 92–101 (2023). https://doi.org/10.1016/j.ensm.2023.02.01210.1016/j.ensm.2023.02.012 ↗
29. T. Li, X.-Q. Zhang, N. Yao, Y.-X. Yao, L.-P. Hou et al., Stable anion-derived solid electrolyte interphase in lithium metal batteries. Angew. Chem. Int. Ed. 60(42), 22683–22687 (2021). https://doi.org/10.1002/anie.20210773210.1002/anie.202107732 ↗
30. Y. Li, S. Ma, Y. Zhao, S. Chen, T. Xiao et al., Synergetic control of Li+ transport ability and solid electrolyte interphase by boron-rich hexagonal skeleton structured all-solid-state polymer electrolyte. Energy Environ. Mater. 7(3), e12648 (2024). https://doi.org/10.1002/eem2.1264810.1002/eem2.12648 ↗
31. S. Zhang, F. Sun, X. Du, X. Zhang, L. Huang et al., In situ-polymerized lithium salt as a polymer electrolyte for high-safety lithium metal batteries. Energy Environ. Sci. 16(6), 2591–2602 (2023). https://doi.org/10.1039/D3EE00558E10.1039/D3EE00558E ↗
32. X.-Y. Huang, C.-Z. Zhao, W.-J. Kong, N. Yao, Z.-Y. Shuang et al., Tailoring polymer electrolyte solvation for 600 Wh kg−1 lithium batteries. Nature 646(8084), 343–350 (2025). https://doi.org/10.1038/s41586-025-09565-z10.1038/s41586-025-09565-z ↗
33. L. Wu, F. Pei, D. Cheng, Y. Zhang, H. Cheng et al., Flame-retardant polyurethane-based solid-state polymer electrolytes enabled by covalent bonding for lithium metal batteries. Adv. Funct. Mater. 34(16), 2310084 (2024). https://doi.org/10.1002/adfm.20231008410.1002/adfm.202310084 ↗
34. F. Pei, L. Wu, Y. Zhang, Y. Liao, Q. Kang et al., Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries. Nat. Commun. 15(1), 351 (2024). https://doi.org/10.1038/s41467-023-43467-w10.1038/s41467-023-43467-w ↗
35. Y. Chai, J. Gao, L. Yang, W. Wu, D. Ning et al., In situ coordinated MOF-polymer composite electrolyte for solid-state lithium metal batteries with exceptional high-rate performance. Small 22(12), 2412494 (2026). https://doi.org/10.1002/smll.20241249410.1002/smll.202412494 ↗
36. J. Chen, D. Zhang, L. Zhu, M. Liu, T. Zheng et al., Hybridizing carbonate and ether at molecular scales for high-energy and high-safety lithium metal batteries. Nat. Commun. 15, 3217 (2024). https://doi.org/10.1038/s41467-024-47448-510.1038/s41467-024-47448-5 ↗
37. L. Yang, Y. Chu, Y. Feng, Y. Mu, L. Zou et al., Breaking voltage limitations: triethyl phosphate-engineered PVDF-based electrolytes with dual-interphase stabilization for 4.7 V-class quasi-solid-state lithium metal batteries. J. Am. Chem. Soc. 147(29), 25940–25949 (2025). https://doi.org/10.1021/jacs.5c0849310.1021/jacs.5c08493 ↗
38. S. Huo, L. Sheng, W. Xue, L. Wang, H. Xu et al., Challenges of polymer electrolyte with wide electrochemical window for high energy solid-state lithium batteries. InfoMat 5(3), e12394 (2023). https://doi.org/10.1002/inf2.1239410.1002/inf2.12394 ↗
39. Z. Zhu, Y. Li, J. Ji, X. Qi, J. Pan et al., Taming the ion-dipole interaction via rational diluent selection for low-temperature Li-metal batteries. Angew. Chem. Int. Ed. 64(15), e202423940 (2025). https://doi.org/10.1002/anie.20242394010.1002/anie.202423940 ↗
40. D. Hu, H. Huang, C. Wang, Q. Hong, H. Wang et al., Tailoring multiple interactions in poly (urethane-urea)-based solid-state polymer electrolytes for long-term cycling lithium metal batteries. Adv. Energy Mater. 15(26), 2406176 (2025). https://doi.org/10.1002/aenm.20240617610.1002/aenm.202406176 ↗
41. Z. Wei, Z. Liu, X. Fu, Y. Wang, A. Yuan et al., Effect of crystalline structure on water resistance of waterborne polyurethane. Eur. Polym. J. 157, 110647 (2021). https://doi.org/10.1016/j.eurpolymj.2021.11064710.1016/j.eurpolymj.2021.110647 ↗
42. J. Petry, M. Dietel, M. Thelakkat, Semi-interpenetrating network electrolytes utilizing ester-functionalized low tg polysiloxanes in lithium-metal batteries. Adv. Energy Mater. 15(12), 2403531 (2025). https://doi.org/10.1002/aenm.20240353110.1002/aenm.202403531 ↗
43. H. Hu, J. Li, F. Lin, J. Huang, H. Zheng et al., Induction effect of fluorine-grafted polymer-based electrolytes for high-performance lithium metal batteries. Nano-Micro Lett. 17(1), 256 (2025). https://doi.org/10.1007/s40820-025-01738-910.1007/s40820-025-01738-9 ↗
44. X. Xie, P. Zhang, X. Li, Z. Wang, X. Qin et al., Rational design of F-modified polyester electrolytes for sustainable all-solid-state lithium metal batteries. J. Am. Chem. Soc. 146(9), 5940–5951 (2024). https://doi.org/10.1021/jacs.3c1209410.1021/jacs.3c12094 ↗
45. K. Liu, S. Jiang, T.L. Dzwiniel, H.-K. Kim, Z. Yu et al., Molecular design of a highly stable single-ion conducting polymer gel electrolyte. ACS Appl. Mater. Interfaces 12(26), 29162–29172 (2020). https://doi.org/10.1021/acsami.0c0336310.1021/acsami.0c03363 ↗
46. Y. Wang, S. Zhang, Z. Chen, H. Zhang, F. Tian et al., Long-life lithium metal batteries enabled by in situ solidified polyphosphoester-based electrolyte. Adv. Mater. 38(3), e14210 (2026). https://doi.org/10.1002/adma.20251421010.1002/adma.202514210 ↗
47. M. Li, D.A. Rakov, Y. Fan, C. Wang, C. Wang et al., Balancing solvation ability of polymer and solvent in gel polymer electrolytes for efficient lithium metal batteries. Angew. Chem. Int. Ed. 64(41), e202513450 (2025). https://doi.org/10.1002/anie.20251345010.1002/anie.202513450 ↗
48. K. Wang, V. Koverga, N. Maslekar, F. Wu, R. Kuphl et al., Novel zwitterionic polyurethane-in-salt electrolytes with high ion conductivity, elasticity, and adhesion for high-performance solid-state lithium metal batteries. Adv. Energy Mater. 15(30), 2405676 (2025). https://doi.org/10.1002/aenm.20240567610.1002/aenm.202405676 ↗
49. Y. Mo, Y. Gao, M. Li, S. Qi, W. Zhang et al., Fluorinated deep eutectic polymer electrolytes with hydrogen bonds-rich networks: realizing targeted management of primary solvation sheath migration. Small 21(13), 2501741 (2025). https://doi.org/10.1002/smll.20250174110.1002/smll.202501741 ↗
50. S. Wang, W. Sun, B. Zhang, J. Guan, T. Wu et al., Elastic bridging design of a fluorine-free electrolyte enables high-performance lithium batteries. Adv. Mater. 38(25), e72977 (2026). https://doi.org/10.1002/adma.7297710.1002/adma.72977 ↗
51. X. Chen, W. Li, C. Luo, H. Zhang, C. Gao et al., A bioinspired piezoelectric stress buffer layer for SiOx-based electrodes toward high-energy lithium batteries. Adv. Mater. 37(45), e04360 (2025). https://doi.org/10.1002/adma.20250436010.1002/adma.202504360 ↗
52. X. Wu, H. Zeng, S. He, R. He, Z. Zhang et al., Intermolecular hydrogen bonding tailors solvation structures for low-temperature and long-cycling lithium-ion batteries. Adv. Funct. Mater. 36(13), e19001 (2026). https://doi.org/10.1002/adfm.20251900110.1002/adfm.202519001 ↗
53. X. Zhang, X. Dong, X. Yue, J. Gao, Z. Shi et al., Solvation regulation via hydrogen bonding to mitigate Al current collector corrosion for high-voltage Li-ion batteries. Adv. Energy Mater. 15(10), 2403588 (2025). https://doi.org/10.1002/aenm.20240358810.1002/aenm.202403588 ↗
54. S. Wang, L. Zhang, Z. Hu, B. Zhang, N. Li et al., Intrinsic structural and coordination chemistry insights of Li salts in rechargeable lithium batteries. Adv. Mater. 37(11), 2420428 (2025). https://doi.org/10.1002/adma.20242042810.1002/adma.202420428 ↗
55. M. Qin, Z. Zeng, F. Ma, C. Gu, X. Chen et al., Doping in solvation structure: enabling fluorinated carbonate electrolyte for high-voltage and high-safety lithium-ion batteries. ACS Energy Lett. 9(6), 2536–2544 (2024). https://doi.org/10.1021/acsenergylett.4c0079010.1021/acsenergylett.4c00790 ↗
56. N. Yao, X. Chen, S.-Y. Sun, Y.-C. Gao, L. Yu et al., Identifying the lithium bond and lithium ionic bond in electrolytes. Chem 11(1), 102254 (2025). https://doi.org/10.1016/j.chempr.2024.07.01610.1016/j.chempr.2024.07.016 ↗
57. B.D. Adams, J. Zheng, X. Ren, W. Xu, J.-G. Zhang, Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries. Adv. Energy Mater. 8(7), 1702097 (2018). https://doi.org/10.1002/aenm.20170209710.1002/aenm.201702097 ↗
58. N. Meng, Y. Ye, Z. Yang, H. Li, F. Lian, Developing single-ion conductive polymer electrolytes for high-energy-density solid state batteries. Adv. Funct. Mater. 33(43), 2305072 (2023). https://doi.org/10.1002/adfm.20230507210.1002/adfm.202305072 ↗
59. J. Li, X. Chen, S. Muhammad, S. Roy, H. Huang et al., Development of solid polymer electrolytes for solid-state lithium battery applications. Mater. Today Energy 43, 101574 (2024). https://doi.org/10.1016/j.mtener.2024.10157410.1016/j.mtener.2024.101574 ↗
60. Z. Zheng, X. Liu, X.-Q. Zhang, S.-Y. Sun, J.-L. Li et al., Deciphering coulombic efficiency of lithium metal anodes by screening electrolyte properties. Angew. Chem. Int. Ed. 64(30), e202507387 (2025). https://doi.org/10.1002/anie.20250738710.1002/anie.202507387 ↗
61. Z. Hao, Y. Wu, Q. Zhao, J. Tang, Q. Zhang et al., Functional separators regulating ion transport enabled by metal-organic frameworks for dendrite-free lithium metal anodes. Adv. Funct. Mater. 31(33), 2102938 (2021). https://doi.org/10.1002/adfm.20210293810.1002/adfm.202102938 ↗
62. Q. Liu, A. Cresce, M. Schroeder, K. Xu, D. Mu et al., Insight on lithium metal anode interphasial chemistry: reduction mechanism of cyclic ether solvent and SEI film formation. Energy Storage Mater. 17, 366–373 (2019). https://doi.org/10.1016/j.ensm.2018.09.02410.1016/j.ensm.2018.09.024 ↗
63. Y. Chai, D. Ning, D. Zhou, J. Gao, J. Ni et al., Construction of flexible asymmetric composite polymer electrolytes for high-voltage lithium metal batteries with superior performance. Nano Energy 130, 110160 (2024). https://doi.org/10.1016/j.nanoen.2024.11016010.1016/j.nanoen.2024.110160 ↗
64. J. Chen, X. Deng, X. Jia, Y. Gao, H. Chen et al., Li+ ion-dipole interaction-enabled a dynamic supramolecular elastomer interface layer for dendrite-free lithium metal anodes. J. Am. Chem. Soc. 146(45), 30836–30847 (2024). https://doi.org/10.1021/jacs.4c0876610.1021/jacs.4c08766 ↗
65. H. Peng, T. Long, J. Peng, H. Chen, L. Ji et al., Molecular design for in-situ polymerized solid polymer electrolytes enabling stable cycling of lithium metal batteries. Adv. Energy Mater. 14(22), 2400428 (2024). https://doi.org/10.1002/aenm.20240042810.1002/aenm.202400428 ↗
66. Y. Zeng, F. Liu, Q. Zhang, D. Cheng, Y. Xu et al., A thermoresponsive electrolyte additive for high-energy, long-cycling, and safe lithium batteries. Joule 9(9), 102100 (2025). https://doi.org/10.1016/j.joule.2025.10210010.1016/j.joule.2025.102100 ↗
67. J. Wu, Z. You, M. Li, H. Chen, S. Feng et al., Synergistic reduction and oxidation resistant interface modifier for high-voltage and high-loading solid-state lithium batteries. Adv. Energy Mater. 15(9), 2403585 (2025). https://doi.org/10.1002/aenm.20240358510.1002/aenm.202403585 ↗