Coherent twin boundaries in Laves phase prevent stress saturation and enable ductile fracture in a CoCuFeNiTa high-entropy alloy

1. others, Achieving exceptional strength-ductility synergy in the GH4698 nickel-based superalloy via heterogeneous grains and L12-\gamma’ nanoprecipitates with bimodal size distribution10.1016/j.msea.2025.148474 ↗

2. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗

3. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗

4. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗

5. Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes10.1002/adem.200300567 ↗

6. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗

7. Carbon effect on thermo-kinetics of Co-Cr-Fe-Mn-Ni high entropy alloys: A computational study validated by interdiffusion experiments10.1016/j.actamat.2023.119358 ↗

8. Processing and Properties of High-Entropy Ultra-High Temperature Carbides10.1038/s41598-018-26827-1 ↗

9. S. Dasari, A. Sharma, C. Jiang, B. Gwalani, W.-C. Lin, K.-C. Lo, S. Gorsse, A.-C. Yeh, S.G. Srinivasan, R. Banerjee, Exceptional enhancement of mechanical properties in high-entropy alloys via thermodynamically guided local chemical ordering, Proc Natl Acad Sci U S A 120 (n.d.) e2211787120. https://doi.org/10.1073/pnas.2211787120.10.1073/pnas.2211787120 ↗

10. Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy10.1016/j.scriptamat.2020.05.063 ↗

11. Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy

12. Effect of varying Al/Ta atomic ratio on precipitation behaviour and mechanical properties of CoCrFeNiTa0.395 eutectic high entropy Alloy

13. Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering10.1016/j.matchar.2024.113826 ↗

14. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗

15. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗

16. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗

17. Effect of atomic size difference on the type of major intermetallic phase in arc-melted CoCrFeNiX high-entropy alloys10.1016/j.jallcom.2016.10.286 ↗

18. Microstructure and mechanical properties of CoCrFeNiW high entropy alloys reinforced by μ phase particles10.1016/j.jallcom.2020.155997 ↗

19. Mitigating embrittlement of sigma phase in dual-phase high-entropy alloys through heterostructure design10.1016/j.ijplas.2025.104272 ↗

20. Formation and significance of topologically close-packed Laves phases in refractory high-entropy alloys10.1016/j.jallcom.2024.174148 ↗

21. Twinning deformation and toughening effect of Laves phase intermetallics10.1016/j.jmrt.2025.03.248 ↗

22. Highly deformable Laves phase in a high entropy alloy10.1016/j.scriptamat.2023.115828 ↗

23. Evidence of twinning-induced plasticity (TWIP) and ultrahigh hardness in additively-manufactured near-eutectic Ni–Nb10.1007/s10853-023-08636-8 ↗

24. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗

25. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗

26. Detwinning mechanisms for growth twins in face-centered cubic metals10.1016/j.actamat.2009.12.013 ↗

27. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗

28. DAMASK: the Düsseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver10.1016/j.piutam.2012.03.001 ↗

29. A spherical harmonic transform approach to the indexing of electron back-scattered diffraction patterns10.1016/j.ultramic.2019.112841 ↗

30. Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging10.1016/j.jallcom.2019.05.001 ↗

31. Dislocation strengthening in FCC metals and in BCC metals at high temperatures10.1016/j.actamat.2016.12.040 ↗

32. Comparison of Full-Field Crystal Plasticity Simulations to Synchrotron Experiments: Detailed Investigation of Mispredictions10.1007/s40192-024-00359-1 ↗

33. Strengthening-softening transition in yield strength of nanotwinned Cu10.1016/j.scriptamat.2018.11.049 ↗

34. Achieving an exceptional ductility at room temperature in a low SFE copper alloy fabricated by severe plastic deformation