Thermal stress build-up and thermal crack formation mechanisms in ferritic high-Si and austenitic high-Mn steels
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (63)
Show source-provided references
1. Medium Mn transformation-induced plasticity steels: recent progress and challenges10.1016/j.scriptamat.2016.07.013 ↗
2. Enhancing strength and cryogenic toughness of high manganese TWIP steel plate by double strengthened structure design10.1016/j.msea.2020.139397 ↗
3. Non-oriented electrical steel sheets
4. De Cooman · 2011
5. Crack formation in the continuous casting of steel10.1007/BF02696937 ↗
6. A formation mechanism of transverse cracks on CC slab surface10.2355/isijinternational.30.310 ↗
7. Reasonable temperature schedules for cold or hot charging of continuously cast steel slabs10.1007/s11661-013-1842-4 ↗
8. Analysis of an as-cast high Si slab to elucidate fundamental causes of the fracture mechanism: clinking10.1016/j.prostr.2018.12.300 ↗
9. Formation and control of transverse corner cracks in the continuous casting slab of a microalloyed steel10.1002/srin.202000649 ↗
10. Mechanism of crack initiation and propagation in high-alloy steel slabs during the cooling and scarfing processes after the continuous casting process10.1016/j.mechmat.2022.104240 ↗
11. Khosla · 2020
12. Cracking and failure characteristics of flame cut thick steel plates10.1007/s11661-020-05639-x ↗
13. A study of high temperature cracking in ferritic stainless steels10.1016/0921-5093(92)90131-J ↗
14. Study of thermal stress cracks in steel ingots10.2355/isijintoverseas.4.3_296 ↗
15. Cleavage fracture assessment of cold charged steel slabs using experimental and numerical approaches10.1016/j.prostr.2018.12.128 ↗
16. Prevention of thermal crack in steel slab using neural networks model to predict impact absorption energy10.1002/srin.202300732 ↗
17. Bhadeshia · 2017
18. Experimental simulation of thermally induced stresses during cooling of continuously cast steel slabs10.1002/srin.201500369 ↗
19. Hot ductility of steels and its relationship to the problem of transverse cracking during continuous casting10.1179/imr.1991.36.1.187 ↗
20. Study of process parameters on solidification structure and centre grain size of 2311 in 420 mm extra-thick continuously cast slabs10.3390/met13010047 ↗
21. Numerical simulation of the 65Mn-Cr steel slab solidification process and analysis of the formation mechanism of internal cracks10.3390/ma18040872 ↗
22. Impulse excitation apparatus to measure resonant frequencies, elastic moduli, and internal friction at room and high temperature10.1063/1.1148422 ↗
23. IETeasy: an open source and low-cost instrument for impulse excitation technique, applied to materials classification by acoustical and mechanical properties assessment10.1016/j.ohx.2021.e00231 ↗
24. Elastic properties of ferrite and austenite in low alloy steels versus temperature and alloying10.1016/j.mtla.2018.100193 ↗
25. Plasticity in cryogenic brittle fracture of ferritic steels: dislocation versus twinning10.1016/j.msea.2018.12.038 ↗
26. Deformation twinning feature and its effects on significant enhancement of tensile ductility in columnar-grained Fe–6.5 wt.% Si alloy at intermediate temperatures10.1016/j.intermet.2011.12.011 ↗
27. Deformation twinning in an Fe-6.5 wt.% Si alloy with columnar grains during intermediate temperature compression10.1016/j.msea.2012.01.050 ↗
28. Thermomechanical processing of advanced high strength steels10.1016/j.pmatsci.2018.01.006 ↗
29. Reed-Hill · 1973
30. Humphreys · 2012
31. Effect of cold rolling on recrystallization and tensile behavior of a high-Mn steel10.1016/j.matchar.2015.12.021 ↗
32. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel10.1016/j.msea.2006.12.170 ↗
33. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
34. Saeed-Akbari · 2011
35. Correlations between the calculated stacking fault energy and the plasticity mechanisms in fe–mn–c alloys10.1016/j.msea.2004.01.059 ↗
36. The temperature dependence of stacking fault energy in Fe-Cr-Ni alloys
37. The correlation between stacking fault energy and the work hardening behaviour of high-Mn twinning induced plasticity steel tested at various temperatures10.4028/www.scientific.net/AMR.922.676 ↗
38. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
39. Deformation twinning characteristics in hot-rolled Fe-6.5 wt% Si alloy with different degree of order10.1016/j.msea.2019.138095 ↗
40. The B 2 and D O3 ordering reactions in iron–silicon alloys in the vicinity of the Curie temperature10.1179/030634575790445279 ↗
41. Applying the grain orientation dependence of deformation twinning to improve the deformation properties of an Fe-6.5 wt% Si alloy10.1016/j.jallcom.2016.07.319 ↗
42. Deformation twinning in equiaxed-grained Fe-6.5 wt.% Si alloy after rotary swaging10.1016/j.jmst.2020.01.048 ↗
43. Fundamental insights on ductile to brittle transition phenomenon in ferritic steel10.1016/j.mtla.2022.101667 ↗
44. Low temperature deformation in iron studied with dislocation dynamics simulations10.1016/j.ijplas.2009.05.003 ↗
45. Elastic constants of iron-silicon alloy single crystals10.1007/BF01587133 ↗
46. Extended Hall–Petch relationships for yield, cleavage and intergranular fracture strengths of bcc steel and its deformation and fracture behaviors10.1007/s12540-018-0026-6 ↗
47. Plastic flow of Fe-binary alloys—II. Application of the description to the ductile-brittle transition10.1016/0001-6160(81)90069-9 ↗
48. Effect of silicon and aluminium in ferrite on tensile and impact properties10.1080/02670836.2017.1320085 ↗
49. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
50. The association of twinning and fracture in bcc metals10.1007/BF02648534 ↗
51. Initiation of cleavage in polycrystalline iron10.1016/0001-6160(65)90121-5 ↗
52. The formation of cracks as a result of plastic flow10.1098/rspa.1954.0124 ↗
53. Crack nucleation in crystalline solids10.1179/msc.1967.1.1.56 ↗
54. Fracture and strength of solids10.1088/0034-4885/12/1/309 ↗
55. A theory of the fracture of metals10.1080/00018735700101406 ↗
56. Elastic properties of metals and alloys, I. Iron, nickel, and iron‐nickel alloys10.1063/1.3253127 ↗
57. Monocrystal‐polycrystal elastic constants of a stainless steel10.1002/pssa.2210850111 ↗
58. Morrell · 2004
59. Howe · 1997
60. De Cooman · 2018
61. Orientation and temperature dependence of plastic deformation processes in 3· 25% silicon iron10.1098/rspa.1963.0111 ↗
62. Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels10.1179/026708309X12535382371852 ↗
63. Modelling of TWIP effect on work-hardening10.1016/S0921-5093(00)02019-0 ↗