1,000-hour life testing of 10-cell planar solid oxide electrolysis cell stacks at 650 °C: Effects of bipolar plate coatings on degradation suppression
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (54)
Show source-provided references
1. Green, turquoise, blue, or grey? Environmentally friendly hydrogen production in transforming energy systems10.1016/j.pecs.2022.100996 ↗
2. Grey, blue, and green hydrogen: a comprehensive review of production methods and prospects for zero-emission energy10.1080/15435075.2023.2244583 ↗
3. A review of high temperature co-electrolysis of H2O and CO2 to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology10.1039/C6CS00403B ↗
4. Energy analysis of a 10 kW-class power-to-gas system based on a solid oxide electrolyzer (SOE)10.1016/j.enconman.2019.111934 ↗
5. Bottom-up cost evaluation of SOEC systems in the range of 10–100 MW10.1016/j.ijhydene.2018.08.161 ↗
6. Stephen Herring · 2003
7. Hybrid H2-fuelled MGT and solar-wind powered SOEC for micro-CHP system: toward a sustainable utility system
8. Modeling of CO2/H2O Co-electrolysis using solar-driven SOEC coupled with ammonia-based chemical heat pump10.1016/j.renene.2023.05.041 ↗
9. Opportunities and limitations for existing CHP plants to integrate polygeneration of drop-in biofuels with onsite hydrogen production10.1016/j.enconman.2020.113109 ↗
10. Ni migration in solid oxide cell electrodes: review and revised hypothesis10.1002/fuce.202100072 ↗
11. Lattice expansion of LSCF-6428 cathodes measured by in situ XRD during SOFC operation10.1016/j.jpowsour.2011.09.099 ↗
12. Life testing of 10 Cm × 10 Cm fuel-electrode-supported solid oxide cells in reversible operation10.1016/j.apenergy.2023.122275 ↗
13. Performance and degradation of an SOEC stack with different cell components10.1016/j.electacta.2017.11.180 ↗
14. Electrochemical performance assessment of low-temperature solid oxide fuel cell with YSZ-based and SDC-based electrolytes10.1016/j.ijhydene.2017.09.173 ↗
15. YSZ-based SOFC with modified electrode/electrolyte interfaces for operating at temperature lower than 650°C10.1016/j.jpowsour.2008.01.066 ↗
16. Ionic conductivity of electrolytes composed of oleate-capped Yttria-stabilized zirconia nanoparticles10.1021/acsomega.3c05368 ↗
17. Nickel depletion and agglomeration in SOFC anodes during long-term operation10.1002/fuce.201600220 ↗
18. Solid oxide cell degradation operated in fuel cell and electrolysis modes: a comparative study on Ni agglomeration and LSCF destabilization10.1149/07801.3167ecst ↗
19. Impact of nickel agglomeration on solid oxide cell operated in fuel cell and electrolysis modes10.1016/j.jpowsour.2018.06.097 ↗
20. Sr segregation in perovskite oxides: why it happens and how it exists10.1016/j.joule.2018.07.016 ↗
21. Applied current on the suppression of strontium segregation in Sr2Fe1.5Mo0.5O6-δ electrode for improved oxygen evolution reaction
22. Modelling of anode delamination in solid oxide electrolysis cell and analysis of its effects on electrochemical performance10.1016/j.ijhydene.2018.02.189 ↗
23. On the delamination of air electrodes of solid oxide electrolysis cells: a mini-review10.1016/j.elecom.2022.107267 ↗
24. SOFC system and technology10.1016/S0167-2738(02)00345-4 ↗
25. Intermediate temperature SOFC – a promise for the 21st century10.1016/S0378-7753(97)02789-4 ↗
26. Dual-environment effects on the oxidation of metallic interconnects10.1361/105994906X117198 ↗
27. Corrosion of metallic interconnects for SOFC in fuel gases10.1016/j.ssi.2003.11.026 ↗
28. Dynamic oxidation of (Mn,Co)3O4-Coated interconnects for solid oxide electrolysis cells10.1016/j.ijhydene.2023.05.110 ↗
29. Protective coatings for ferritic stainless steel interconnect materials in high temperature solid oxide electrolyser atmospheres10.3390/en15031168 ↗
30. Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques10.1016/j.ijhydene.2016.03.195 ↗
31. Understanding the phase stability of yttria stabilized zirconia electrolyte under solid oxide electrolysis cell operation conditions10.1039/D3TA06652E ↗
32. Performance of stainless steel interconnects with (Mn,Co)3O4-Based coating for solid oxide electrolysis10.1016/j.ijhydene.2022.05.206 ↗
33. Understanding the Ni migration in solid oxide cell: a coupled experimental and modeling approach10.1149/1945-7111/acc1a3 ↗
34. Study of solid oxide electrolysis cells operated in potentiostatic mode: effect of operating temperature on durability10.1016/j.cej.2021.129260 ↗
35. ELECTRICAL CONDUCTIVITY AND SEEBECK VOLTAGE OF Fe20J, PURE AND DOPED, AS A FUNCTION OF TEMPERATURE AND OXYGEN PRESSURE
36. Study of protected current for stainless steel and carbon steel cathode from rust attack to determining optimum flow of electricity10.1088/1742-6596/1179/1/012091 ↗
37. Degradation analysis of commercial interconnect materials for solid oxide fuel cells in stacks operated up to 18000 hours10.1016/j.ijhydene.2019.09.218 ↗
38. Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties10.1016/j.ssi.2004.10.004 ↗
39. Li · 2013
40. 2015
41. Effect of pre-oxidation on the oxidation resistance of crofer 22 APU10.1016/j.corsci.2018.04.016 ↗
42. The effect of water vapor on selective oxidation of Fe–Cr alloys10.1007/s11085-007-9090-x ↗
43. Severe dual atmosphere effect at 600 °C for stainless steel 44110.1016/j.jpowsour.2015.10.001 ↗
44. Improving the interface adherence at sealings in solid oxide cell stacks10.1557/jmr.2018.459 ↗
45. Analysis of oxide film formed on type 304 stainless steel in 288°C water containing oxygen, hydrogen, and hydrogen peroxide10.5006/1.3283969 ↗
46. Manganese–cobalt based spinel coatings processed by electrophoretic deposition method: the influence of sintering on degradation issues of solid oxide cell oxygen electrodes at 750 °C10.3390/ma14143836 ↗
47. Multi-scale assessment of Cr contamination levels in SOFC cathode environment10.1149/1.3570190 ↗
48. Combined Cr and S poisoning in solid oxide fuel cell cathodes10.1016/j.jpowsour.2011.10.123 ↗
49. Thermodynamic perspective of Sr-related degradation issues in SOFCs10.1111/ijac.12809 ↗
50. Phase relations in the system Sr-Cr-O and thermodynamic properties of SrCrO4 and Sr3Cr2O810.1361/105497100770340417 ↗
51. Performance analysis of a metal-supported intermediate-temperature solid oxide electrolysis cell10.3389/fenrg.2022.888787 ↗
52. Chromium deposition and poisoning of La0.8Sr0.2MnO3 oxygen electrodes of solid oxide electrolysis cells10.1039/C5FD00010F ↗
53. Selective oxidation synthesis of MnCr2O4 spinel nanowires from commercial stainless steel foil10.1021/cg070514a ↗
54. Thermal sprayed protective coatings for bipolar plates of hydrogen fuel cells and water electrolysis cells