Effect of hybrid woven fabrics structure on their electrical properties
Source abstract
Abstract
The aim of this study is to investigate the influence of hybrid textile woven fabric structure on the electrical resistivity. Weave structure was varied by varying the weave pattern and the conductive yarn density in the woven fabrics. Electrical surface and volume resistivity were measured and compared to the fabric structural properties. Results showed that not only the conductive yarns percentage has an important effect on the electrical resistivity but also the weave structure. The most influencing structural parameter on surface resistivity was the woven fabric surface profile as it controls the contact quality between the conductive yarns and the measuring electrodes. A high surface resistivity was noticed when the contact quality was poor. When this contact quality was good, a linear correlation was found between surface electrical resistivity and the cover firmness factor, the apparent conductive fiber surface area as well as the conductive yarn floating length of the woven structures.
Source: openaire · Quality: candidate unverified · Source record ↗
References (21)
Show source-provided references
1. R.H. Guo, S.Q. Jiang, C.W.M. Yuen, M.C.F. Ng, An alternative process for electroless copper plating on polyester fabric. J. Mater. Sci. Mater. Electron. 20(1), 33–38 (2009)10.1007/s10854-008-9594-4 ↗
2. V. Rubežienė, J. Baltušnikaitė, S. Varnaitė-Žuravliova, A. Sankauskaitė, A. Abraitienė, J. Matuzas, Development and investigation of electromagnetic shielding fabrics with different electrically conductive additives. J. Electrost. 75, 90–98 (2015)10.1016/j.elstat.2015.03.009 ↗
3. S. Wu, P. Liu, Y. Zhang, H. Zhang, X. Qin, Flexible and conductive nanofiber-structured single yarn sensor for smart wearable devices. Sens. Actuators B 252, 697–705 (2017)10.1016/j.snb.2017.06.062 ↗
4. S. Karuppusamy, G. Demudu Babu, V.K. Venkatesh, F. Marken, M.A. Kulandainathan, Highly conductive nano-silver textile for sensing hydrogen peroxide. J. Electroanal. Chem. 799, 473–480 (2017)10.1016/j.jelechem.2017.07.002 ↗
5. Y. Zhou, X. Ding, J. Zhang, Y. Duan, J. Hu, X. Yang, Fabrication of conductive fabric as textile electrode for ECG monitoring. Fibers Polym. 15(11), 2260–2264 (2014)10.1007/s12221-014-2260-y ↗
6. P. Lekpittaya, Resistivity of conductive polymer-coated fabric. J. Appl. Polym. Sci. 92, 2629–2636 (2004)10.1002/app.20270 ↗
7. X. Jiang, Biostability of electrically conductive polyester fabrics: an in vitro study. J. Biomed. Mater. 62, 507–513 (2002)10.1002/jbm.10240 ↗
8. D. Das, K. Sen, A. Saraogi, S. Maity, Experimental studies on electro-conductive fabric prepared by in situ polymerization of thiophene onto polyester. J. Appl. Polym. Sci. 116, 3555–3561 (2010)10.1002/app.31916 ↗
9. H.C. Chen, K.C. Lee, J.H. Lin, M. Koch, Fabrication of conductive woven fabric and analysis of electromagnetic shielding via measurement and empirical equation. J. Mater. Process. Technol. 184(1–3), 124–130 (2007)10.1016/j.jmatprotec.2006.11.030 ↗
10. C.-W. Lou, C.-W. Lin, C.-H. Lei, H.-C. Chen, Y.-M. Li, J.-H. Lin, Weaving Technology and Mechanical Properties of Extended-PTFE Fabrics, Seventh Asia Pacific Conference on Materials Processing, 7th APCMP 2006, vol. 192, no. Supplement C, pp. 319–322 (2007)10.1016/j.jmatprotec.2007.04.064 ↗
11. J. Hong, Z. Pan, M. ZheWang, J. Yao, Y. Chen, Zhang, A large-strain weft-knitted sensor fabricated by conductive UHMWPE/PANI composite yarns. Sens. Actuators Phys. 238, 307–316 (2016)10.1016/j.sna.2015.12.028 ↗
12. K.B. Cheng, T.W. Cheng, K.C. Lee, T.H. Ueng, W.H. Hsing, Effects of yarn constitutions and fabric specifications on electrical properties of hybrid woven fabrics. Compos. Part Appl. Sci. Manuf. 34(10), 971–978 (2003)10.1016/S1359-835X(03)00178-7 ↗
13. T.H. Ueng, K.B. Cheng, Friction core-spun yarns for electrical properties of woven fabrics. Compos. Part Appl. Sci. Manuf. 32(10), 1491–1496 (2001)10.1016/S1359-835X(01)00048-3 ↗
14. R. Neelakandan, Electrical Resistivity Studies on Polyaniline Coated Polyester Fabrics. (Department of textile technology, Anna University, Chennai, 2010)10.1177/155892501000500304 ↗
15. F. Sekerden, Effect of the constructions of metal fabrics on their electrical resistance. Fibres Text. East. Eur. 21, 58–63 (2013)
16. M. Tokarska, M. Frydrysiak, J. Zięba, Electrical properties of flat textile material as inhomegeneous and anisotropic structure. J. Mater. Sci. Mater. Electron. 24(12), 5061–5068 (2013)10.1007/s10854-013-1524-4 ↗
17. H. Morino, M. Matsudaira, M. Furutani, Predicting mechanical properties and hand values from the parameters of weave structures. Text. Res. J. 75(3), 252–257 (2005)10.1177/004051750507500311 ↗
18. I. Fatahi, Predicting Air Permeability from the Parameters of Weave Structure (Department of Textile Engineering, Yazd University, Yazd, Iran, 2012), pp. 78–81
19. M. Havlová, Model of Vertical Porosity Occurring in Woven Fabrics and Its Effect on Air Permeability (Technical University of Liberec, Faculty of Textile Engineering, Department of Textile Evaluation, Leberec, Czech Republic, 2014), pp. 58–68
20. V. Sankaran, V. Subramaniam, Effect of weave structures on the low stress mechanical properties of woven cotton fabrics. Fibres Text. East. Eur. 20, 56–59 (2012)
21. A.A. Eddib, D.D.L. Chung, The importance of the electrical contact between specimen and testing fixture in evaluating the electromagnetic interference shielding effectiveness of carbon materials. Carbon 117, 427–436 (2017)10.1016/j.carbon.2017.02.091 ↗