Fabrication of binary Ag-based conductive paste with high electrical conductivity and bending resistance for flexible printed electronics

1. W. Gao, H. Ota, D. Kiriya, K. Takei, A. Javey, Flexible electronics toward wearable sensing. Acc. Chem. Res. 52, 523 (2019). https://doi.org/10.1021/acs.accounts.8b0050010.1021/acs.accounts.8b00500 ↗

2. S.L. Wang, X.Q. Cui, Y. Peng, J.H. Zheng, D. Ding, H.T. Ma, R. Wang, H.Y. Zhang, A temperature monitoring and fever alarm system composed of printing flexible electronics. J. Mater. Sci. Mater. Electron. (2024). https://doi.org/10.1007/s10854-024-12545-010.1007/s10854-024-12545-0 ↗

3. D.H. Kim, J.A. Rogers, Stretchable electronics: Materials strategies and devices. Adv. Mater. 20, 4887 (2008). https://doi.org/10.1002/adma.20080178810.1002/adma.200801788 ↗

4. M.M. Hussain, Z.J. Ma, S.F. Shaikh, Flexible and stretchable electronics–progress, challenges, and prospects. Electroc. Soc. Interfac. 27, 65 (2018)10.1149/2.F08184if ↗

5. X.Q. Li, X.K. Li, M.J. Wang, R.Q. Zheng, Y. Jin, Z.J. Gu, Flexible and strain conductive cotton yarn enabled by low-temperature sintering of silver paste with multifunctional sensing capability in human motion detection and wearable applications. Chem. Eng. J. (2023). https://doi.org/10.1016/j.cej.2023.14484310.1016/j.cej.2023.144843 ↗

6. L. Tang, S. Yang, K. Zhang, X. Jiang, Skin electronics from biocompatible in situ welding enabled by intrinsically sticky conductors. Adv. Sci. 9, e2202043 (2022). https://doi.org/10.1002/advs.20220204310.1002/advs.202202043 ↗

7. R. Madhavan, Flexible and stretchable strain sensors fabricated by inkjet printing of silver nanowire-ecoflex composites. J. Mater. Sci.-Mater. Electron. 33, 3465 (2022). https://doi.org/10.1007/s10854-021-07540-810.1007/s10854-021-07540-8 ↗

8. S. Wu, Z. Cui, G.L. Baker, S. Mahendran, Z. Xie, Y. Zhu, A biaxially stretchable and self-sensing textile heater using silver nanowire composite. ACS Appl. Mater. Interfac. 13, 59085 (2021). https://doi.org/10.1021/acsami.1c1765110.1021/acsami.1c17651 ↗

9. M. Singh, H.M. Haverinen, P. Dhagat, G.E. Jabbour, Inkjet printing-process and its applications. Adv. Mater. 22, 673 (2010). https://doi.org/10.1002/adma.20090114110.1002/adma.200901141 ↗

10. J.Z. Song, H.B. Zeng, Transparent electrodes printed with nanocrystal inks for flexible smart devices. Angewandte. Chem.-Int. Editi. 54, 9760 (2015). https://doi.org/10.1002/anie.20150123310.1002/anie.201501233 ↗

11. S. Hou, C. Chen, L. Bai, J. Yu, Y. Cheng, W. Huang, Stretchable electronics with strain-resistive performance. Small. 20, e2306749 (2024). https://doi.org/10.1002/smll.20230674910.1002/smll.202306749 ↗

12. S. Huang, Y. Liu, Y. Zhao, Z. Ren, C.F. Guo, Flexible electronics: stretchable electrodes and their future. Adv. Funct. Mater. (2018). https://doi.org/10.1002/adfm.20180592410.1002/adfm.201805924 ↗

13. Y.S. Sun, S. Yang, Z.Y. Pang, S.H. Chi, X.X. Sun, L. Fan, F.Y. Wang, X.Y. Liu, M.B. Wei, L.L. Yang, J.H. Yang, Hydrogen tetrachloroaurate-modulated PEDOT:PSS film assembled with conductive NPB buffer layer for high-performance planar perovskite solar cells. Chem. Eng. J. (2022). https://doi.org/10.1016/j.cej.2021.13435810.1016/j.cej.2021.134358 ↗

14. X.F. Zhao, C.Z. Hang, X.H. Wen, M.Y. Liu, H. Zhang, F. Yang, R.G. Ma, J.C. Wang, D.W. Zhang, H.L. Lu, Ultrahigh-sensitive finlike double-sided e-skin for force direction detection. ACS Appl. Mater. Interfac. 12, 14136 (2020). https://doi.org/10.1021/acsami.9b2311010.1021/acsami.9b23110 ↗

15. X.J. Zhang, J.Q. Guo, K.X. Yang, Y. Lei, C. Yan, C.Y. Yang, Q.Y. Huang, Y.F. Xia, H.M. Ma, C.Q. Fang, Non-covalently crosslinked networks MXene-doped poly(eutectic) conductive elastomers with antimicrobial, self-healing, tunable mechanical properties, and wide temperature durability. Ceram. Int. 50, 32853 (2024). https://doi.org/10.1016/j.ceramint.2024.06.09610.1016/j.ceramint.2024.06.096 ↗

16. M. Idrees, A. Razaq, A. Islam, S. Yasmeen, K. Sultana, M.H. Asif, M. Nadeem, Morphology and dielectric properties of directly collected and polyaniline coated lignocelluloses fibers. Synth. Met. 232, 138 (2017). https://doi.org/10.1016/j.synthmet.2017.08.00910.1016/j.synthmet.2017.08.009 ↗

17. C. Martínez-Domingo, S. Conti, L. Terés, H.L. Gomes, E. Ramon, Novel flexible inkjet-printed metal-insulator-semiconductor organic diode employing silver electrodes. Org. Electron. 62, 335 (2018). https://doi.org/10.1016/j.orgel.2018.08.01110.1016/j.orgel.2018.08.011 ↗

18. A.A. Salam, S. Ebrahim, M. Soliman, A. Shokry, Preparation of silver nanowires with controlled parameters for conductive transparent electrodes. Sci. Rep. (2024). https://doi.org/10.1038/s41598-024-70789-610.1038/s41598-024-70789-6 ↗

19. F. Wu, L. Cheng, W.H. Wang, Surface plasmon resonance of large-size Ag nanobars. Micromachines. (2022). https://doi.org/10.3390/mi1304063810.3390/mi13040638 ↗

20. U. Pandey, A.K. Yadav, P.K. Aich, R. Chakraborty, S. Dahiya, B.N. Pal, Fabrication of schottky barrier oxide transistors to reduce subthreshold swing close to the theoretical limits. Adv. Mater. Technol. (2025). https://doi.org/10.1002/admt.20250141210.1002/admt.202501412 ↗

21. D.P. Chen, L. Zhao, H.W. Diao, W.B. Zhang, G. Wang, W.J. Wang, Low-temperature sintering properties of the screen-printed silver paste for a-Si:H/c-Si heterojunction solar cells. J. Mater. Sci.-Mater. Electron. 25, 2657 (2014). https://doi.org/10.1007/s10854-014-1925-z10.1007/s10854-014-1925-z ↗

22. B. Singh, M.M. Shabat, D.M. Schaadt, Wide angle antireflection in metal nanoparticles embedded in a dielectric matrix for plasmonic solar cells. Prog. Photovolt. Res. Appl. 28, 682 (2020). https://doi.org/10.1002/pip.325810.1002/pip.3258 ↗

23. X. Dou, H. Wang, Z. Liu, B. Zheng, Z. Zheng, X. Liu, R. Guo, Epoxy resin-assisted Cu catalytic printing for flexible Cu conductors on smooth and rough substrates. ACS Appl. Mater. Interfac. (2023). https://doi.org/10.1021/acsami.3c1101110.1021/acsami.3c11011 ↗

24. K. Bradley, J.-C.P. Gabriel, G. Grüner, Flexible nanotube electronics. Nano Lett. 3, 1353 (2003). https://doi.org/10.1021/nl034486410.1021/nl0344864 ↗

25. B.D. Gates, Flexible electronics. Science. 323, 1566 (2009). https://doi.org/10.1126/science.117123010.1126/science.1171230 ↗

26. Q. Fu, Y. Chen, M. Sorieul, Wood-based flexible electronics. ACS. Nano. 14, 3528 (2020). https://doi.org/10.1021/acsnano.9b0981710.1021/acsnano.9b09817 ↗

27. S. Jiang, X. Liu, J. Liu, D. Ye, Y. Duan, K. Li, Z. Yin, Y. Huang, Flexible metamaterial electronics. Adv. Mater. 34, e2200070 (2022). https://doi.org/10.1002/adma.20220007010.1002/adma.202200070 ↗

28. C.F. Li, W. Li, H. Zhang, J. Jiu, Y. Yang, L. Li, Y. Gao, Z.Q. Liu, K. Suganuma, Highly conductive Ag paste for recoverable wiring and reliable bonding used in stretchable electronics. ACS Appl. Mater. Interfac. 11, 3231 (2019). https://doi.org/10.1021/acsami.8b1906910.1021/acsami.8b19069 ↗

29. M. Rdest, D. Janas, A straightforward approach to create Ag/SWCNT composites. Materials. (2021). https://doi.org/10.3390/ma1408195610.3390/ma14081956 ↗

30. I. Theodorakos, F. Zacharatos, R. Geremia, D. Karnakis, I. Zergioti, Selective laser sintering of Ag nanoparticles ink for applications in flexible electronics. Appl. Surf. Sci. 336, 157 (2015). https://doi.org/10.1016/j.apsusc.2014.10.12010.1016/j.apsusc.2014.10.120 ↗

31. R.Z. Li, A.M. Hu, D. Bridges, T. Zhang, K.D. Oakes, R. Peng, U. Tumuluri, Z.L. Wu, Z.L. Feng, Robust Ag nanoplate ink for flexible electronics packaging. Nanoscale. 7, 7368 (2015). https://doi.org/10.1039/c5nr00312a10.1039/c5nr00312a ↗

32. W.F. Shao, G. Li, P.L. Zhu, Y. Zhang, Q.L. Ouyang, R. Sun, C.H. Chen, C.P. Wong, Facile synthesis of low temperature sintering Ag nanopaticles for printed flexible electronics. J. Mater. Sci.-Mater. Electron. 29, 4432 (2018). https://doi.org/10.1007/s10854-017-8390-410.1007/s10854-017-8390-4 ↗

33. S. Fang, R. Wang, H.S. Ni, Y.T. Liu, H. Liu, Y.F. Li, L. Liu, Thermal field distribution investigation and simulation of silver paste heating fabric by screen printing based on Joule heating effect. J. Mater. Sci. Mater. Electron. 32, 27762 (2021). https://doi.org/10.1007/s10854-021-07159-910.1007/s10854-021-07159-9 ↗

34. M.A.M. Asri, N.A. Ramli, A.N. Nordin, Electrical performance and reliability assessment of silver inkjet printed circuits on flexible substrates. J. Mater. Sci. Mater. Electron. 32, 16024 (2021). https://doi.org/10.1007/s10854-021-06152-610.1007/s10854-021-06152-6 ↗

35. Z.H. Wang, W. Wang, Z.K. Jiang, D. Yu, A novel and simple method of printing flexible conductive circuits on PET fabrics. Appl. Surf. Sci. 396, 208 (2017). https://doi.org/10.1016/j.apsusc.2016.09.15510.1016/j.apsusc.2016.09.155 ↗

36. K.S. Bhat, U.T. Nakate, J.Y. Yoo, Y. Wang, T. Mahmoudi, Y.B. Hahn, Cost-effective silver ink for printable and flexible electronics with robust mechanical performance. Chem. Eng. J. 373, 355 (2019). https://doi.org/10.1016/j.cej.2019.05.03310.1016/j.cej.2019.05.033 ↗

37. C. Nash, Y. Spiesschaert, G. Amarandei, Z. Stoeva, R.I. Tomov, D. Tonchev, I. van Driessche, B.A. Glowacki, A comparative study on the conductive properties of coated and printed silver layers on a paper substrate. J. Electron. Mater. 44, 497 (2015). https://doi.org/10.1007/s11664-014-3434-510.1007/s11664-014-3434-5 ↗

38. J. Tang, H. Fu, Y.L. Tang, D. Li, Development of conductive silver paste for ZnO varistor chip withstanding the impact of high current. J. Alloys Compd. (2024). https://doi.org/10.1016/j.jallcom.2024.17376910.1016/j.jallcom.2024.173769 ↗

39. B. Lee, H. Han, H.G. Hahn, J.M. Doh, S.H. Park, E. Lee, S.S. Lee, C. Park, H.S. Lim, J.A. Lim, Ecofriendly catechol lipid bioresin for low-temperature processed electrode patterns with strong durability. ACS Appl. Mater. Interfac. 12, 16864 (2020). https://doi.org/10.1021/acsami.0c0019910.1021/acsami.0c00199 ↗

40. H. Jiang, C.L. Tang, Y. Wang, L.H. Mao, Q. Sun, L.B. Zhang, H.J. Song, F.L. Huang, C.C. Zuo, Low content and low-temperature cured silver nanoparticles/silver ion composite ink for flexible electronic applications with robust mechanical performance. Appl. Surf. Sci. (2021). https://doi.org/10.1016/j.apsusc.2021.15044710.1016/j.apsusc.2021.150447 ↗

41. M. Sun, C.M. Li, Y.Q. Xu, B.P. Lin, X.Q. Zhang, Y. Sun, An conductive ink based on silver oxide complex for low-temperature sintering with dense conductive paths. J. Mater. Sci. Mater. Electron. (2024). https://doi.org/10.1007/s10854-024-12524-510.1007/s10854-024-12524-5 ↗

42. X. Liu, S.Y. Wu, B.S. Chen, Y.Z. Ma, Y.F. Huang, S.W. Tang, W.S. Liu, Tuning the electrical resistivity of conductive silver paste prepared by blending multi-morphologies and micro-nanometers silver powder. J. Mater. Sci.-Mater. Electron. 32, 13777 (2021). https://doi.org/10.1007/s10854-021-05954-y10.1007/s10854-021-05954-y ↗

43. C. Liu, Q.G. Fu, J.Z. Zou, Y.S. Huang, X.R. Zeng, B. Cheng, Effects of polyester resin molecular weight on the performance of low temperature curing silver pastes. J. Mater. Sci.-Mater. Electron. 27, 6511 (2016). https://doi.org/10.1007/s10854-016-4593-310.1007/s10854-016-4593-3 ↗

44. B.G. Park, K.H. Jung, S.B. Jung, Fabrication of the hybrid Ag paste combined by Ag nanoparticle and micro Ag flake and its flexibility. J. Alloys Compd. 699, 1186 (2017). https://doi.org/10.1016/j.jallcom.2016.12.29510.1016/j.jallcom.2016.12.295 ↗

45. Z. Huang, H.A. Dong, B.S. Chen, S.W. Tang, Y.Z. Ma, W.S. Liu, Investigation of 1-hexanol base silver paste formula for low-temperature sintering. J. Mater. Sci. Mater. Electron. (2023). https://doi.org/10.1007/s10854-023-11233-910.1007/s10854-023-11233-9 ↗

46. C. Cano-Raya, Z.Z. Denchev, S.F. Cruz, J.C. Viana, Chemistry of solid metal-based inks and pastes for printed electronics - a review. Appl. Mater. Today 15, 416 (2019). https://doi.org/10.1016/j.apmt.2019.02.01210.1016/j.apmt.2019.02.012 ↗

47. J.T. Jiu, H. Zhang, S. Nagao, T. Sugahara, N. Kagami, Y. Suzuki, Y. Akai, K. Suganuma, Die-attaching silver paste based on a novel solvent for high-power semiconductor devices. J. Mater. Sci. 51, 3422 (2016). https://doi.org/10.1007/s10853-015-9659-810.1007/s10853-015-9659-8 ↗

48. H. Zhang, W.L. Li, Y. Gao, H. Zhang, J.T. Jiu, K. Suganuma, Enhancing low-temperature and pressureless sintering of micron silver paste based on an ether-type solvent. J. Electron. Mater. 46, 5201 (2017). https://doi.org/10.1007/s11664-017-5525-610.1007/s11664-017-5525-6 ↗

49. B. Philip, E. Jewell, D. Worsley, The impact of solvent characteristics on performance and process stability of printed carbon resistive materials. J. Coat. Technol. Res. 13, 911 (2016). https://doi.org/10.1007/s11998-016-9802-810.1007/s11998-016-9802-8 ↗

50. K.F. Wang, J.Y. Wen, J.Y. Feng, Y.P. Wang, P. Wu, S. Wang, Y.H. Tian, A novel Cu@Ag nano paste with low porosity for rapidly sintering in air condition. Mater. Charact. (2024). https://doi.org/10.1016/j.matchar.2024.11376210.1016/j.matchar.2024.113762 ↗

51. Q. Wang, F. He, Z. Liu, J. Wang, H. Li, Effect of polyurethane synthesized from different polyester diols on the properties of conductive silver paste. Mater. Rep. 38, 22110234 (2024). https://doi.org/10.11896/cldb.2211023410.11896/cldb.22110234 ↗

52. D.P. Chen, X.L. Qiao, X.L. Qiu, F.T. Tan, J.G. Chen, R.Z. Jiang, Effect of silver nanostructures on the resistivity of electrically conductive adhesives composed of silver flakes. J. Mater. Sci.-Mater. Electron. 21, 486 (2010). https://doi.org/10.1007/s10854-009-9943-y10.1007/s10854-009-9943-y ↗

53. M.Z. Shan-Can Fu, Huiyong Shan, Yuan Li, Fabrication of large-area interconnects by sintering of micron Ag paste. Mater. Lett. 226, 26 (2018). https://doi.org/10.1016/j.matlet.2018.05.02310.1016/j.matlet.2018.05.023 ↗

54. E.H. Jewell, T.C. Claypole, D.T. Gethin, Viscosity control in the screen printing of ceramic transfers. Surfac. Coat. Int. Part B-Coat. Trans. 86, 155 (2003). https://doi.org/10.1007/bf0269962810.1007/bf02699628 ↗