Simultaneously improving strength and ductility by direct aging heat treatment in direct energy deposited Ti–Cu alloys with heterogeneous structure

1. Lin Z, Song K, Yu X (2021) A review on wire and arc additive manufacturing of titanium alloy. J Manuf Process 70:24–45. https://doi.org/10.1016/j.jmapro.2021.08.01810.1016/j.jmapro.2021.08.018 ↗

2. Nartu MS, Welk BA, Mantri SA (2023) Underlying factors determining grain morphologies in high-strength titanium alloys processed by additive manufacturing. Nat Commun 14(1):3288. https://doi.org/10.1038/s41467-023-38885-910.1038/s41467-023-38885-9 ↗

3. StJohn DH, Qian M, Easton MA (2011) The interdependence theory: the relationship between grain formation and nucleant selection. Acta Mater 59(12):4907–4921. https://doi.org/10.1016/j.actamat.2011.04.03510.1016/j.actamat.2011.04.035 ↗

4. Bermingham MJ, StJohn DH, Krynen J (2019) Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing. Acta Mater 168:261–274. https://doi.org/10.1016/j.actamat.2019.02.02010.1016/j.actamat.2019.02.020 ↗

5. Yang ZW, Fu LQ, Wang SL (2021) Balance of strength and plasticity of additive manufactured Ti-6Al-4V alloy by forming TiB whiskers with cyclic gradient distribution. Addit Manuf 39:101883. https://doi.org/10.1016/j.addma.2021.10188310.1016/j.addma.2021.101883 ↗

6. Shi CL, Wang Y, Zhang M (2025) Refinement of microstructure and improvement of mechanical properties of directed energy deposited titanium alloys by adding Fe. J Alloys Compd 1010:1–10.. https://doi.org/10.1016/j.jallcom.2024.17699610.1016/j.jallcom.2024.176996 ↗

7. Zhang D, Qiu D, Gibson MA (2019) Additive manufacturing of ultrafine-grained high-strength titanium alloys. Nature 576(7785):91–95. https://doi.org/10.1038/s41586-019-1783-110.1038/s41586-019-1783-1 ↗

8. Zheng Z, Chen J, Yu P (2025) Achieve an excellent strength-ductility balance by introducing heterogeneous structure in wire arc additively manufactured Ti-Cu alloys. Mater Sci Eng A 927:147973. https://doi.org/10.1016/j.msea.2025.14797310.1016/j.msea.2025.147973 ↗

9. Li K, Yang J, Yi Y (2023) Enhanced strength-ductility synergy and mechanisms of heterostructured Ti6Al4V-Cu alloys produced by laser powder bed fusion. Acta Mater 256:119112. https://doi.org/10.1016/j.actamat.2023.11911210.1016/j.actamat.2023.119112 ↗

10. Akbarpour MR, Mirabad HM, Hemmati A (2022) Processing and microstructure of Ti-Cu binary alloys: a comprehensive review. Prog Mater Sci 127:100933. https://doi.org/10.1016/j.pmatsci.2022.10093310.1016/j.pmatsci.2022.100933 ↗

11. Wang Q, Zhang K, Niu W (2021) Microstructural characteristic and mechanical properties of titanium-copper alloys in-situ fabricated by selective laser melting. J Alloys Compd 885:161032. https://doi.org/10.1016/j.jallcom.2021.16103210.1016/j.jallcom.2021.161032 ↗

12. Wang X, Zhang LJ, Ning J (2022) Effect of Cu-induced eutectoid transformation on microstructure and mechanical properties of Ti–6Al–4V alloy by laser wire deposition. Mater Sci Eng A 833:142316. https://doi.org/10.1016/j.msea.2021.14231610.1016/j.msea.2021.142316 ↗

13. Han J, Zhang G, Chen X (2022) High strength Ti alloy fabricated by directed energy deposition with in-situ Cu alloying. J Mater Process Technol 310:117759. https://doi.org/10.1016/j.jmatprotec.2022.11775910.1016/j.jmatprotec.2022.117759 ↗

14. Zhu Y, Wu X (2023) Heterostructured materials. Prog Mater Sci 131:101019. https://doi.org/10.1016/j.pmatsci.2022.10101910.1016/j.pmatsci.2022.101019 ↗

15. Dong X, Gao B, Xiao L (2024) Heterostructured metallic structural materials: research methods, properties, and future perspectives. Adv Funct Mater 34:2410521. https://doi.org/10.1002/adfm.20241052110.1002/adfm.202410521 ↗

16. Li X, Lu K (2019) Improving sustainability with simpler alloys. Science 364(6442):733–734. https://doi.org/10.1126/science.aaw990510.1126/science.aaw9905 ↗

17. Li X, Lu K (2017) Playing with defects in metals. Nat Mater 16(7):700–701. https://doi.org/10.1038/nmat492910.1038/nmat4929 ↗

18. Su W, Wang M, Guo F (2024) Heterostructure enables anomalous improvement of cryogenic mechanical properties in titanium. Acta Mater 273:119982. https://doi.org/10.1016/j.actamat.2024.11998210.1016/j.actamat.2024.119982 ↗

19. Liu S, Huang G, Gupta M (2025) Microstructures, mechanical properties and deformation mechanism of heterogeneous metal materials: a review. J Mater Sci Technol 248:1–46. https://doi.org/10.1016/j.jmst.2025.03.10910.1016/j.jmst.2025.03.109 ↗

20. Lin T, Zhou L, Guo Y (2025) Synergic strength-ductility enhancement in bimodal titanium alloy via a heterogeneous structure induced by the< c+ a> slip. J Mater Sci Technol 204:255–267. https://doi.org/10.1016/j.jmst.2024.04.01210.1016/j.jmst.2024.04.012 ↗

21. Gao B, Lai Q, Cao Y (2020) Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling. Sci Adv 6(39):eaba8169. https://doi.org/10.1126/sciadv.aba816910.1126/sciadv.aba8169 ↗

22. Zheng Z, Chen J, Yu P (2024) Synergic enhancement of strength and ductility in wire arc additively manufactured Ti-Cu alloys. Mater Lett 377:137449. https://doi.org/10.1016/j.matlet.2024.13744910.1016/j.matlet.2024.137449 ↗

23. Jia Z, Zhao Q, Zhang Y (2023) Hot and cold rolling of a novel near-α titanium alloy: mechanical properties and underlying deformation mechanism. Mater Sci Eng A 863:144543. https://doi.org/10.1016/j.msea.2022.14454310.1016/j.msea.2022.144543 ↗

24. Gao S, Zhang M, Wang ZX (2025) Impact-resistant titanium alloy with fine equiaxed structure fabricated by powder metallurgy. J Mater Sci Technol 221:129–142. https://doi.org/10.1016/j.jmst.2024.09.03710.1016/j.jmst.2024.09.037 ↗

25. Laleh M, Sadeghi E, Revilla RI (2023) Heat treatment for metal additive manufacturing. Prog Mater Sci 133:101051. https://doi.org/10.1016/j.pmatsci.2022.10105110.1016/j.pmatsci.2022.101051 ↗

26. Rojas-Arias N, Coury FG, Vanmeensel K (2024) Heat treating additive-manufactured alloys: a comprehensive review. J Alloys Compd 1005:176035. https://doi.org/10.1016/j.jallcom.2024.17603510.1016/j.jallcom.2024.176035 ↗

27. Zhang K, Ma S, Shen Z (2025) Achieving superior mechanical performance in FeCrAl alloys through serrated and pinning-enhanced grain boundaries. J Mater Res Technol 37:1465–1471. https://doi.org/10.1016/j.jmrt.2025.06.11010.1016/j.jmrt.2025.06.110 ↗

28. Wang SX, Li SF, Misra RDK (2025) Achieving strong and ductile as-printed Ti-Cu alloys via tailoring eutectoid morphology. Mater Res Lett 13:577–586. https://doi.org/10.1080/21663831.2025.248072810.1080/21663831.2025.2480728 ↗

29. Fan H, Yang S (2020) Effects of direct aging on near-alpha Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM). Mater Sci Eng A 788:139533. https://doi.org/10.1016/j.msea.2020.13953310.1016/j.msea.2020.139533 ↗

30. Yadav BN, Lin DW, Lin MC (2024) Implemented in-situ heat treatment process for controlling the residual thermal stresses during the fabrication of Ti-6Al-4V titanium alloy through additive manufacturing. Mater Lett 356:135580. https://doi.org/10.1016/j.matlet.2023.13558010.1016/j.matlet.2023.135580 ↗

31. Zheng ZD, Wu SJ, Fan LM (2024) The formation mechanism and suppression strategies of spatter in pulsed gas metal arc welding for titanium alloy. Weld J. https://doi.org/10.29391/2024.103.02010.29391/2024.103.020 ↗

32. Li Y, Wu S, Li H (2021) Submerged arc additive manufacturing (SAAM) of low-carbon steel: effect of in-situ intrinsic heat treatment (IHT) on microstructure and mechanical properties. Addit Manuf 46:102124. https://doi.org/10.1016/j.addma.2021.10212410.1016/j.addma.2021.102124 ↗

33. Ju Y, Li S, Ba L (2025) Effect of cyclic heat treatment on microstructure and mechanical properties of ultra-high strength steel fabricated by wire+ arc additive manufacturing with cold metal transfer. Mater Sci Eng A 927:147986. https://doi.org/10.1016/j.msea.2025.14798610.1016/j.msea.2025.147986 ↗

34. Mantri SA, Alam T, Zheng Y (2020) Influence of post deposition annealing on microstructure and properties of laser additively manufactured titanium copper alloys. Addit Manuf 32:101067. https://doi.org/10.1016/j.addma.2020.10106710.1016/j.addma.2020.101067 ↗

35. Donthula H, Vishwanadh B, Alam T (2019) Morphological evolution of transformation products and eutectoid transformation (s) in a hyper-eutectoid Ti-12 at% Cu alloy. Acta Mater 168:63–75. https://doi.org/10.1016/j.actamat.2019.01.04410.1016/j.actamat.2019.01.044 ↗

36. Wang H, Yu C, Li M (2024) Mechanisms of plastic deformation and mechanical strengthening in nano-scale Ti-Ti2Cu eutectoids: a study combined molecular dynamics simulation and experiment. J Mater Sci Technol 193:146–159. https://doi.org/10.1016/j.jmst.2023.12.04410.1016/j.jmst.2023.12.044 ↗

37. Devaraj A, Nag S, Muddle BC (2011) Competing martensitic, bainitic, and pearlitic transformations in a hypoeutectoid Ti-5Cu alloy. Metall Mater Trans A 42:1139–1143. https://doi.org/10.1007/s11661-011-0656-510.1007/s11661-011-0656-5 ↗

38. Wu D, Hao M, Zhang T (2023) Heterostructures enhance simultaneously strength and ductility of a commercial titanium alloy. Acta Mater 257:119182. https://doi.org/10.1016/j.actamat.2023.11918210.1016/j.actamat.2023.119182 ↗

39. Yao M, Yao Z, Tao X (2024) Microstructure and tensile properties of Ti6Al4V with layered structures fabricated by electron beam directed energy deposition. Vacuum 227:113343. https://doi.org/10.1016/j.vacuum.2024.11334310.1016/j.vacuum.2024.113343 ↗

40. Hayama AOF, Andrade PN, Cremasco A (2014) Effects of composition and heat treatment on the mechanical behavior of Ti–Cu alloys. Mater Des 55:1006–1013. https://doi.org/10.1016/j.matdes.2013.10.05010.1016/j.matdes.2013.10.050 ↗

41. Liu H, Wang H, Ren L (2023) Antibacterial copper-bearing titanium alloy prepared by laser powder bed fusion for superior mechanical performance. J Mater Sci Technol 132:100–109. https://doi.org/10.1016/j.jmst.2022.04.05610.1016/j.jmst.2022.04.056 ↗

42. Wang J, Zhang S, Sun Z (2019) Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant. J Mater Sci Technol 35(10):2336–2344. https://doi.org/10.1016/j.jmst.2019.03.04410.1016/j.jmst.2019.03.044 ↗

43. Wang Z, Huo Y, Qin Y (2024) Tailorable copper-bearing titanium alloys with remarkable strength and ductility fabricated by spark plasma sintering for biomedical applications. J Mater Res Technol 31:810–820. https://doi.org/10.1016/j.jmrt.2024.06.11410.1016/j.jmrt.2024.06.114 ↗

44. Alshammari Y, Jia M, Yang F (2020) The effect of α+ β forging on the mechanical properties and microstructure of binary titanium alloys produced via a cost-effective powder metallurgy route. Mater Sci Eng A 769:138496. https://doi.org/10.1016/j.msea.2019.13849610.1016/j.msea.2019.138496 ↗

45. Kok Y, Tan XP, Wang P (2018) Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des 139:565–586. https://doi.org/10.1016/j.matdes.2017.11.02110.1016/j.matdes.2017.11.021 ↗

46. Contieri RJ, Lopes ESN, Caram R (2014) Effects of cooling rate on the microstructure and solute partitioning in near eutectoid Ti–Cu alloys. Philos Mag 94(21):2350–2371. https://doi.org/10.1080/14786435.2014.91311310.1080/14786435.2014.913113 ↗

47. Taguchi O, Iijima Y (1995) Diffusion of copper, silver and gold in α-titanium. Philos Mag A 72(6):1649–1655. https://doi.org/10.1080/0141861950824393510.1080/01418619508243935 ↗

48. Tang H, Gao C, Zhang Y (2023) Effects of direct aging treatment on microstructure, mechanical properties and residual stress of selective laser melted AlSi10Mg alloy. J Mater Sci Technol 139:198–209. https://doi.org/10.1016/j.jmst.2022.08.03210.1016/j.jmst.2022.08.032 ↗

49. Wert CA (1950) Diffusion coefficient of C in α-iron. Phys Rev 79(4):60110.1103/PhysRev.79.601 ↗

50. Cermak J, Kral L (2014) Carbon diffusion in carbon-supersaturated ferrite and austenite. J Alloys Compd 586:129–135. https://doi.org/10.1016/j.jallcom.2013.10.05810.1016/j.jallcom.2013.10.058 ↗

51. Prestipino S, Laio A, Tosatti E (2014) Shape and area fluctuation effects on nucleation theory. J Chem Phys 140(9):094501. https://doi.org/10.1063/1.486697110.1063/1.4866971 ↗

52. MacDowell LG (2003) Formal study of nucleation as described by fluctuation theory. J Chem Phys 119(1):453–463. https://doi.org/10.1063/1.157862310.1063/1.1578623 ↗

53. Wang W, Wang X, Lu G (2025) Achieving superior strength-ductility synergy of 2205 duplex stainless steel via dual-heterogeneous structure design. J Mater Sci Technol 208:202–213. https://doi.org/10.1016/j.jmst.2024.04.07110.1016/j.jmst.2024.04.071 ↗

54. Zhou Y, Wang K, Wen X (2023) Achieving synergy enhancement of strength and ductility in Ti-6Al-2Sn-4Zr-2Mo-0.1 Si alloy by fabricating a new multiscale microstructure. Scr Mater 226:115233. https://doi.org/10.1016/j.scriptamat.2022.11523310.1016/j.scriptamat.2022.115233 ↗

55. Li Y, Wu S, Wang J (2022) Microstructure homogeneity and strength-toughness balance in submerged arc additive manufactured Mn-Ni-Mo high-strength steel by unique intrinsic heat treatment. J Mater Process Technol 307:117682. https://doi.org/10.1016/j.jmatprotec.2022.11768210.1016/j.jmatprotec.2022.117682 ↗

56. Yang X, Di X, Wang J (2023) The co-precipitation evolution of NiAl and Cu nanoparticles and its influence on strengthening and toughening mechanisms in low-carbon ultra-high strength martensite seamless tube steel. Int J Plast 166:103654. https://doi.org/10.1016/j.ijplas.2023.10365410.1016/j.ijplas.2023.103654 ↗

57. Yang X, Qin G, Feng L (2025) Development of high-strength and high-ductility high-entropy alloys via directional solidification: a multifaceted strengthening approach. Int J Plast 191:104403. https://doi.org/10.1016/j.ijplas.2025.10440310.1016/j.ijplas.2025.104403 ↗

58. Yang JK, Zhang CL, Zhang H (2024) Spinodal decomposition-mediated multi-architectured α precipitates making a metastable β-Ti alloy ultra-strong and ductile. J Mater Sci Technol 191:106–121. https://doi.org/10.1016/j.jmst.2023.11.07110.1016/j.jmst.2023.11.071 ↗

59. Gong ZQ, Wang XJ, Li L (2025) Multiscale insights into temperature effects on the sliding wear of a martensitic stainless steel. J Mater Res Technol 37:1174–1185. https://doi.org/10.1016/j.jmrt.2025.06.10210.1016/j.jmrt.2025.06.102 ↗

60. Wang YC, Jiao ZC, Shi YR (2025) Investigation on the wear performance of CoCrNi matrix self-lubricating composites at cryogenic temperature. Surf Coat Technol 500:131906. https://doi.org/10.1016/j.surfcoat.2025.13190610.1016/j.surfcoat.2025.131906 ↗

61. Ma YY, Jiao ZC, Huang ZY (2025) Exploration on the oxidation resistance of TiAlNbN films: mechanisms of nanopore regulation and crack suppression. Corros Sci 257:113273. https://doi.org/10.1016/j.corsci.2025.11327310.1016/j.corsci.2025.113273 ↗

62. Wang L, Song Z, Zhang X (2022) Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion. Addit Manuf 52:102656. https://doi.org/10.1016/j.addma.2022.10265610.1016/j.addma.2022.102656 ↗

63. Zhao GH, Liang XZ, Kim B (2019) Modelling strengthening mechanisms in beta-type Ti alloys. Mater Sci Eng A 756:156–160. https://doi.org/10.1016/j.msea.2019.04.02710.1016/j.msea.2019.04.027 ↗

64. Feng L, Qin G, Yang X (2025) Simultaneous strength and ductility enhancement in Co29Cr31Cu4Mn15Ni21 high entropy alloy through fully coherent nano-precipitates. Mater Charact 225:115113. https://doi.org/10.1016/j.matchar.2025.11511310.1016/j.matchar.2025.115113 ↗

65. Chen YN, Wei JF, Zhao YQ (2009) Effect of semi-solid forging temperature on microstructure and mechanical properties of Ti14 alloy. J Alloys Compd 487(1–2):314–320. https://doi.org/10.1016/j.jallcom.2009.07.11910.1016/j.jallcom.2009.07.119 ↗

66. Zhang H, Cui H, Song X (2024) Excellent tribocorrosion resistance of additively manufactured Ti-based heterogeneous composite coating via hardening and toughening effects. J Mater Sci Technol 190:76–92. https://doi.org/10.1016/j.jmst.2023.11.02710.1016/j.jmst.2023.11.027 ↗

67. Xia QS, Hua DP, Shi YR (2025) Unveiling the dislocation mechanism induced by irradiation defects in austenitic FeCrNi alloy. Int J Plast 193:104451. https://doi.org/10.1016/j.ijplas.2025.10445110.1016/j.ijplas.2025.104451 ↗

68. Xie Q, Cao Y, Huang J (2023) Effect of laser energy density on microstructural evolution of selective laser melted Ti-15Zr alloy. J Alloys Compd 934:167778. https://doi.org/10.1016/j.jallcom.2022.16777810.1016/j.jallcom.2022.167778 ↗

69. Shi R, Nie Z, Fan Q (2018) Correlation between dislocation-density-based strain hardening and microstructural evolution in dual phase TC6 titanium alloy. Mater Sci Eng A 715:101–107. https://doi.org/10.1016/j.msea.2017.12.09810.1016/j.msea.2017.12.098 ↗

70. Fan H, Wang Q, El-Awady JA (2021) Strain rate dependency of dislocation plasticity. Nat Commun 12(1):1845. https://doi.org/10.1038/s41467-021-21939-110.1038/s41467-021-21939-1 ↗

71. Wu H, Fan G (2020) An overview of tailoring strain delocalization for strength-ductility synergy. Prog Mater Sci 113:100675. https://doi.org/10.1016/j.pmatsci.2020.10067510.1016/j.pmatsci.2020.100675 ↗

72. Zheng Z, Wu H, Zhang S (2025) The microstructure evolution and embrittlement mechanism in the heat-affected zone of thick-plate titanium alloys fabricated by gas metal arc welding. J Mater Process Technol 335:118657. https://doi.org/10.1016/j.jmatprotec.2024.11865710.1016/j.jmatprotec.2024.118657 ↗

73. Kamimura Y, Edagawa K, Iskandarov AM (2018) Peierls stresses estimated via the Peierls-Nabarro model using ab-initio γ-surface and their comparison with experiments. Acta Mater 148:355–362. https://doi.org/10.1016/j.actamat.2018.02.00910.1016/j.actamat.2018.02.009 ↗

74. Beyerlein IJ, Demkowicz MJ, Misra A (2015) Defect-interface interactions. Prog Mater Sci 74:125–210. https://doi.org/10.1016/j.pmatsci.2015.02.00110.1016/j.pmatsci.2015.02.001 ↗

75. Zhou YH, Liu J, Chen K (2025) Predicting intergranular stress corrosion cracking of stainless steels in high-temperature water by incorporating crystallographic factor. Acta Mater 297:121322. https://doi.org/10.1016/j.actamat.2025.12132210.1016/j.actamat.2025.121322 ↗

76. Wu X, Suo H, Ji Y (2020) Systematical analysis on the grain orientation evolution of pure nickel under plastic deformation by using in-situ EBSD. Mater Sci Eng A 792:139722. https://doi.org/10.1016/j.msea.2020.13972210.1016/j.msea.2020.139722 ↗