Large improvement in ductility of ultra-high strength CoCrNi-base alloy by one-stage grain refinement

1. Yeh JW, Chen SK, Lin SJ, Gan JY, Chin TS, Shun TT, Tsau CH, Chang SY (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater 6(5):299–303. https://doi.org/10.1002/adem.20030056710.1002/adem.200300567 ↗

2. Hsu W-L, Tsai C-W, Yeh A-C, Yeh J-W (2024) Clarifying the four core effects of high-entropy materials. Nat Rev Chem 8(6):471–485. https://doi.org/10.1038/s41570-024-00602-510.1038/s41570-024-00602-5 ↗

3. Yeh J-W (2013) Alloy design strategies and future trends in high-entropy alloys. JOM 65(12):1759–1771. https://doi.org/10.1007/s11837-013-0761-610.1007/s11837-013-0761-6 ↗

4. Garcia Filho FDC, Ritchie RO, Meyers MA, Monteiro SN (2022) Cantor-derived medium-entropy alloys: bridging the gap between traditional metallic and high-entropy alloys. J Mater Res Technol 17:1868–1895. https://doi.org/10.1016/j.jmrt.2022.01.11810.1016/j.jmrt.2022.01.118 ↗

5. Gludovatz B, Hohenwarter A, Thurston KVS, Bei H, Wu Z, George EP, Ritchie RO (2016) Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures. Nat Commun 7(1):10602. https://doi.org/10.1038/ncomms1060210.1038/ncomms10602 ↗

6. Moon J, Tabachnikova E, Shumilin S, Hryhorova T, Estrin Y, Brechtl J, Liaw PK, Wang W, Dahmen KA, Kim HS (2021) Unraveling the discontinuous plastic flow of a Co-Cr-Fe-Ni-Mo multiprincipal-element alloy at deep cryogenic temperatures. Phys Rev Mater 5(8):083601. https://doi.org/10.1103/PhysRevMaterials.5.08360110.1103/PhysRevMaterials.5.083601 ↗

7. Jiang W, Ju J, Li Z, Wang Z, Wang E, Zhao F (2025) Synergetic effect of bias voltage on tribological properties and corrosion behavior of CoCrNiTi medium entropy alloy films deposited by magnetron sputtering. Surf Coat Technol 512:132380. https://doi.org/10.1016/j.surfcoat.2025.13238010.1016/j.surfcoat.2025.132380 ↗

8. Han J, Zhang Y, Sun Z, Zhang Y, Zhao Y, Sun L, Zhang Z (2023) Enhanced irradiation tolerance of a medium entropy alloy via precipitation and dissolution of nanoprecipitates. J Nucl Mater 586:154693. https://doi.org/10.1016/j.jnucmat.2023.15469310.1016/j.jnucmat.2023.154693 ↗

9. Cantor B, Chang ITH, Knight P, Vincent AJB (2004) Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng, A 375–377:213–218. https://doi.org/10.1016/j.msea.2003.10.25710.1016/j.msea.2003.10.257 ↗

10. Shahmir H, Mehranpour MS, Shams SAA, Langdon TG (2023) Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering. J Mater Res Technol 23:3362–3423. https://doi.org/10.1016/j.jmrt.2023.01.18110.1016/j.jmrt.2023.01.181 ↗

11. Xu D, Wang M, Li T, Wei X, Lu Y (2022) A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys. Microstructures 2(1):2022001. https://doi.org/10.20517/microstructures.2021.1010.20517/microstructures.2021.10 ↗

12. Tirunilai AS, Hanemann T, Reinhart C, Tschan V, Weiss KP, Laplanche G, Freudenberger J, Heilmaier M, Kauffmann A (2020) Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi. Mater Sci Eng A 783:139290. https://doi.org/10.1016/j.msea.2020.13929010.1016/j.msea.2020.139290 ↗

13. Liu J-P, Chen J-X, Liu T-W, Li C, Chen Y, Dai L-H (2020) Superior strength-ductility CoCrNi medium-entropy alloy wire. Scr Mater 181:19–24. https://doi.org/10.1016/j.scriptamat.2020.02.00210.1016/j.scriptamat.2020.02.002 ↗

14. Laplanche G, Kostka A, Reinhart C, Hunfeld J, Eggeler G, George EP (2017) Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi. Acta Mater 128:292–303. https://doi.org/10.1016/j.actamat.2017.02.03610.1016/j.actamat.2017.02.036 ↗

15. Mehranpour MS, Rasooli N, Kim HS, Langdon TG, Shahmir H (2024) Deformation-induced martensitic transformations: a strategy for overcoming the strength-ductility trade-off in high-entropy alloys. Curr Opin Solid State Mater Sci 31:101177. https://doi.org/10.1016/j.cossms.2024.10117710.1016/j.cossms.2024.101177 ↗

16. Watanabe T (1984) An approach to grain boundary design for strong and ductile polycrystals. Res Mech 11(1):47–84

17. Watanabe T, Tsurekawa S (1999) The control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering. Acta Mater 47(15):4171–4185. https://doi.org/10.1016/S1359-6454(99)00275-X10.1016/S1359-6454(99)00275-X ↗

18. Randle V, Coleman M (2009) A study of low-strain and medium-strain grain boundary engineering. Acta Mater 57(11):3410–3421. https://doi.org/10.1016/j.actamat.2009.04.00210.1016/j.actamat.2009.04.002 ↗

19. Lee DS, Ryoo HS, Hwang SK (2003) A grain boundary engineering approach to promote special boundaries in Pb-base alloy. Mater Sci Eng A 354(1):106–111. https://doi.org/10.1016/S0921-5093(02)00919-X10.1016/S0921-5093(02)00919-X ↗

20. Lehockey EM, Palumbo G, Lin P (1998) Improving the weldability and service performance of nickel-and iron-based superalloys by grain boundary engineering. Metall Mater Trans A 29(12):3069–3079. https://doi.org/10.1007/s11661-998-0214-y10.1007/s11661-998-0214-y ↗

21. Shimada M, Kokawa H, Wang ZJ, Sato YS, Karibe I (2002) Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering. Acta Mater 50(9):2331–2341. https://doi.org/10.1016/S1359-6454(02)00064-210.1016/S1359-6454(02)00064-2 ↗

22. Lu W, Luo X, Yang Y, Huang B (2020) Hall-petch relationship and heterogeneous strength of CrCoNi medium-entropy alloy. Mater Chem Phys 251:123073. https://doi.org/10.1016/j.matchemphys.2020.12307310.1016/j.matchemphys.2020.123073 ↗

23. Wu Z, Bei H, Pharr GM, George EP (2014) Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures. Acta Mater 81:428–441. https://doi.org/10.1016/j.actamat.2014.08.02610.1016/j.actamat.2014.08.026 ↗

24. Sathiyamoorthi P, Moon J, Bae JW, Asghari-Rad P, Kim HS (2019) Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing. Scr Mater 163:152–156. https://doi.org/10.1016/j.scriptamat.2019.01.01610.1016/j.scriptamat.2019.01.016 ↗

25. Xu XD, Liu P, Hirata A, Song SX, Nieh TG, Chen MW (2018) Microstructural origins for a strong and ductile Al0.1CoCrFeNi high-entropy alloy with ultrafine grains. Materialia 4:395–405. https://doi.org/10.1016/j.mtla.2018.10.01510.1016/j.mtla.2018.10.015 ↗

26. Sun SJ, Tian YZ, Lin HR, Dong XG, Wang YH, Zhang ZJ, Zhang ZF (2017) Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure. Mater Des 133:122–127. https://doi.org/10.1016/j.matdes.2017.07.05410.1016/j.matdes.2017.07.054 ↗

27. Zhang L, Du X, Zhang L, Li W, Liang Y, Yu J, Zou N, Wan G, Tang Y, Duan G, Wu B (2021) Achieving ultra-high strength in a precipitation-hardened CoCrNi-based medium-entropy alloy with partially recrystallized microstructure and heterogeneous grains. Vacuum 188:110169. https://doi.org/10.1016/j.vacuum.2021.11016910.1016/j.vacuum.2021.110169 ↗

28. Slone CE, Miao J, George EP, Mills MJ (2019) Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures. Acta Mater 165:496–507. https://doi.org/10.1016/j.actamat.2018.12.01510.1016/j.actamat.2018.12.015 ↗

29. Sathiyamoorthi P, Asghari-Rad P, Bae JW, Kim HS (2019) Fine tuning of tensile properties in CrCoNi medium entropy alloy through cold rolling and annealing. Intermetallics 113:106578. https://doi.org/10.1016/j.intermet.2019.10657810.1016/j.intermet.2019.106578 ↗

30. Xu D, Zhang H, Wang M, Lu Y, Chen X, Ren Z (2022) Enhanced strength-ductility synergy in a Ta-doped CoCrNi medium-entropy alloy with a dual heterogeneous structure. Mater Sci Eng A 860:144293. https://doi.org/10.1016/j.msea.2022.14429310.1016/j.msea.2022.144293 ↗

31. Chou TH, Li WP, Chang HW, Du XH, Chuang WS, Yang T, Zhu YT, Huang JC (2022) Quantitative analysis of hetero-deformation induced strengthening in heterogeneous grain structure. Int J Plast 159:103482. https://doi.org/10.1016/j.ijplas.2022.10348210.1016/j.ijplas.2022.103482 ↗

32. Zhang C, Zhu C, Harrington T, Vecchio K (2018) Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy. Scr Mater 154:78–82. https://doi.org/10.1016/j.scriptamat.2018.05.02010.1016/j.scriptamat.2018.05.020 ↗

33. Nabarro FR, Duesbery MS (2002) Dislocations in solids. Elsevier

34. Straumal BB, Korneva A, Kuzmin A, Lopez GA, Rabkin E, Straumal AB, Gerstein G, Gornakova AS (2021) The grain boundary wetting phenomena in the Ti-containing high-entropy alloys: a review. Metals 11(11):1881. https://doi.org/10.3390/met1111188110.3390/met11111881 ↗

35. Kilmametov A, Gornakova A, Khrapova N, Davdyan G, Kogtenkova O, Khorosheva M, Orlov V, Straumal B (2026) The influence of grain boundary wetting on the mechanical properties of polycrystals. Mater Lett 406:139950. https://doi.org/10.1016/j.matlet.2025.13995010.1016/j.matlet.2025.139950 ↗

36. Straumal BB, Klinger L, Kuzmin A, Lopez GA, Korneva A, Straumal AB, Vershinin N, Gornakova AS (2022) High entropy alloys coatings deposited by laser cladding: a review of grain boundary wetting phenomena. Coatings 12(3):343. https://doi.org/10.3390/coatings1203034310.3390/coatings12030343 ↗

37. Zhang F, He J, Wu Y, Mao H, Wang H, Liu X, Jiang S, Nieh TG, Lu Z (2022) Effects of Ni and Al on precipitation behavior and mechanical properties of precipitation-hardened CoCrFeNi high-entropy alloys. Mater Sci Eng A 839:142879. https://doi.org/10.1016/j.msea.2022.14287910.1016/j.msea.2022.142879 ↗

38. Scharifi E, Savaci U, Kavaklioglu ZB, Weidig U, Turan S, Steinhoff K (2021) Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy. Mater Charact 174:111026. https://doi.org/10.1016/j.matchar.2021.11102610.1016/j.matchar.2021.111026 ↗

39. Peterson A, Baker I (2021) The formation mechanism, growth, and effect on the mechanical properties of precipitate free zones in the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al during creep. Mater Sci Eng A 820:141561. https://doi.org/10.1016/j.msea.2021.14156110.1016/j.msea.2021.141561 ↗

40. Zhou K, Wang Z, He F, Liu S, Li J, Kai J-J, Wang J (2020) A precipitation-strengthened high-entropy alloy for additive manufacturing. Addit Manuf 35:101410. https://doi.org/10.1016/j.addma.2020.10141010.1016/j.addma.2020.101410 ↗

41. Zhang L, Huo X, Wang A, Du X, Zhang L, Li W, Zou N, Wan G, Duan G, Wu B (2020) A ductile high entropy alloy strengthened by nano sigma phase. Intermetallics 122:106813. https://doi.org/10.1016/j.intermet.2020.10681310.1016/j.intermet.2020.106813 ↗

42. Liu B, Xu L, Liu Y, Wang J, Wang J, Fang Q (2018) Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy. Sci China Technol Sci 61(2):197–203. https://doi.org/10.1007/s11431-017-9122-510.1007/s11431-017-9122-5 ↗

43. Zheng KY, Dong J, Zeng XQ, Ding WJ (2008) Precipitation and its effect on the mechanical properties of a cast Mg–Gd–Nd–Zr alloy. Mater Sci Eng A 489(1):44–54. https://doi.org/10.1016/j.msea.2007.11.08010.1016/j.msea.2007.11.080 ↗

44. Li R, Abakumov S, Gusak A, Luo Z, Wang M, Wilde G, Zhang Y, Divinski S (2026) Coarsening of BCC precipitates following spinodal-like decomposition in the B2 phase of AlCoCrFeNiTi0.2 compositionally complex alloy. Mater Sci Eng A 965:150286. https://doi.org/10.1016/j.msea.2026.15028610.1016/j.msea.2026.150286 ↗

45. Bouse G (1996) Eta(77) and platelet phases in investment cast superalloys. Structure 8:571

46. Choi B G, Kim I S, Kim D H, Seo C Y, Jo C Y (2004) Eta phase formation during thermal exposure and its effect on mechanical properties in Ni-base superalloy GTD 111, In: Tenth International Symposium of Superalloys 2004, pp. 163-171. https://doi.org/10.7449/2004/Superalloys_2004_163_171.10.7449/2004/Superalloys_2004_163_171 ↗

47. Long F, Yoo YS, Jo CY, Seo SM, Song YS, Jin T, Hu ZQ (2009) Formation of η and σ phase in three polycrystalline superalloys and their impact on tensile properties. Mater Sci Eng A 527(1):361–369. https://doi.org/10.1016/j.msea.2009.09.01610.1016/j.msea.2009.09.016 ↗

48. Wang C, Wang T, Tan M, Guo Y, Guo J, Zhou L (2015) Thermal stability of a new Ni–Fe–Cr base alloy with different Ti/Al ratios. J Mater Sci Technol 31(2):135–142. https://doi.org/10.1016/j.jmst.2014.07.00810.1016/j.jmst.2014.07.008 ↗

49. Shen P-K, Liu H-C, Huang C-Y, Yen H-W, Yeh J-W, Tsai C-W (2022) Microstructure and mechanical properties of medium-entropy alloys with a high-density η-D024 phase. Mater Charact 185:111713. https://doi.org/10.1016/j.matchar.2021.11171310.1016/j.matchar.2021.111713 ↗

50. Tsai M-H, Tsai K-Y, Tsai C-W, Lee C, Juan C-C, Yeh J-W (2013) Criterion for sigma phase formation in Cr- and V-containing high-entropy alloys. Mater Res Lett 1(4):207–212. https://doi.org/10.1080/21663831.2013.83138210.1080/21663831.2013.831382 ↗

51. Wu Q, Wang Z, He F, Yang Z, Li J, Wang J (2022) Endless recrystallization of high-entropy alloys at high temperature. J Mater Sci Technol 128:71–81. https://doi.org/10.1016/j.jmst.2022.04.02210.1016/j.jmst.2022.04.022 ↗

52. Hu GW, Zeng LC, Du H, Wang Q, Fan ZT, Liu XW (2021) Combined effects of solute drag and Zener pinning on grain growth of a NiCoCr medium-entropy alloy. Intermetallics 136:107271. https://doi.org/10.1016/j.intermet.2021.10727110.1016/j.intermet.2021.107271 ↗

53. Zamani MR, Mirzadeh H, Malekan M, Cao SC, Yeh J-W (2023) Grain growth in high-entropy alloys (HEAs): a review. High Entropy Alloys Mater 1(1):25–59. https://doi.org/10.1007/s44210-022-00002-810.1007/s44210-022-00002-8 ↗

54. Zhang H, Tong Y, Cao S, Hu Y, Ji X, Tang Q, Yang L, Zhang X, Hua M (2022) Outstanding yield strength of CoCrNiTa0.1 medium entropy alloy under the synergistic regulated with nanoprecipitation and grain refining. J Alloys Compd 919:165715. https://doi.org/10.1016/j.jallcom.2022.16571510.1016/j.jallcom.2022.165715 ↗

55. Huang Z, wen D, Xu Y, Guo Q, Chen Z, Jiang X, Wang A, Li Y, Zhou B, Hou X, Wang B (2024) Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy. Mater Sci Eng A 890:145897. https://doi.org/10.1016/j.msea.2023.14589710.1016/j.msea.2023.145897 ↗

56. Zhang JX, Ma M, Liu WC (2017) Effect of initial grain size on the recrystallization and recrystallization texture of cold-rolled AA 5182 aluminum alloy. Mater Sci Eng A 690:233–243. https://doi.org/10.1016/j.msea.2017.03.01510.1016/j.msea.2017.03.015 ↗

57. Xiao YW, Cheng Z, Li SH, Wang SZ, Wu HH, Gao JH, Zhao HT, Grumsen FB, Winther G, Wu GL, Mao XP, Mishin OV (2023) Recrystallization tuning to optimize mechanical properties in heavily rolled CoCrFeNi medium entropy alloy. J Alloys Compd 968:172153. https://doi.org/10.1016/j.jallcom.2023.17215310.1016/j.jallcom.2023.172153 ↗

58. Sathiaraj GD, Bhattacharjee PP (2015) Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy. J Alloys Compd 647:82–96. https://doi.org/10.1016/j.jallcom.2015.06.00910.1016/j.jallcom.2015.06.009 ↗

59. Liang X, Wu Q, Li H, Wang R, Kang L, Liu B, Wang L (2021) Static recrystallization and texture evolution of cold-rolled powder metallurgy CoCrFeNiN0.07 high-entropy alloy. J Alloys Compd 862:158602. https://doi.org/10.1016/j.jallcom.2021.15860210.1016/j.jallcom.2021.158602 ↗

60. Zhang H, Sun M, Ma D, Xu B, Wang T, Li D, Li Y (2021) Effect of aging temperature on the heterogeneous microstructure and mechanical properties of a 12Cr–10Ni–Mo–Ti maraging steel for cryogenic applications. J Mater Sci 56(19):11469–11484. https://doi.org/10.1007/s10853-021-05993-010.1007/s10853-021-05993-0 ↗

61. Li J, Wu Y, Liu Y, Li C, Ma Z, Yu L, Li H, Liu C, Guo Q (2020) Enhancing tensile properties of wrought Ni-based superalloy ATI 718Plus at elevated temperature via morphology control of η phase. Mater Charact 169:110547. https://doi.org/10.1016/j.matchar.2020.11054710.1016/j.matchar.2020.110547 ↗

62. Tang L, Zhang H, Guo Q, Liu C, Li C, Liu Y (2021) The precipitation of η phase during the solution treatments of Allvac 718Plus. Mater Charact 176:111142. https://doi.org/10.1016/j.matchar.2021.11114210.1016/j.matchar.2021.111142 ↗

63. Seifollahi M, Razavi SH, Kheirandish S, Abbasi SM (2013) The mechanism of η phase precipitation in A286 superalloy during heat treatment. J Mater Eng Perform 22(10):3063–3069. https://doi.org/10.1007/s11665-013-0592-110.1007/s11665-013-0592-1 ↗

64. Zhao S, Xie X, Smith GD, Patel SJ (2003) Microstructural stability and mechanical properties of a new nickel-based superalloy. Mater Sci Eng A 355(1):96–105. https://doi.org/10.1016/S0921-5093(03)00051-010.1016/S0921-5093(03)00051-0 ↗

65. Hou K, Ou M, Wang M, Li H, Ma Y, Liu K (2019) Precipitation of η phase and its effects on stress rupture properties of K4750 alloy. Mater Sci Eng A 763:138137. https://doi.org/10.1016/j.msea.2019.13813710.1016/j.msea.2019.138137 ↗

66. Slone CE, Mazánová V, Kumar P, Cook DH, Heczko M, Yu Q, Crossman B, George EP, Mills MJ, Ritchie RO (2024) Partially recrystallized microstructures expand the strength-toughness envelope of CrCoNi medium-entropy alloy. Commun Mater 5(1):263. https://doi.org/10.1038/s43246-024-00704-z10.1038/s43246-024-00704-z ↗

67. Wang N, Wang C, Liu X, Chen Y, Wu G, Zhu L, Luo J (2025) Influence of dislocation density on the fracture behavior of pipeline steel after plastic deformation damage. Eng Fail Anal 177:109663. https://doi.org/10.1016/j.engfailanal.2025.10966310.1016/j.engfailanal.2025.109663 ↗

68. Raabe D, Ponge D, Dmitrieva O, Sander B (2009) Nanoprecipitate-hardened 1.5GPa steels with unexpected high ductility. Scr Mater 60(12):1141–1144. https://doi.org/10.1016/j.scriptamat.2009.02.06210.1016/j.scriptamat.2009.02.062 ↗

69. Peng S, Wei Y, Gao H (2020) Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength. Proc Natl Acad Sci U S A 117(10):5204–5209. https://doi.org/10.1073/pnas.191461511710.1073/pnas.1914615117 ↗

70. Jiang Y, Guo C, Shi L, An G, Shi Y, Zhou C, Xiao X, Wang H, Yang B (2024) The influence of zirconium addition on microstructure evolution, precipitation behavior, and properties of Cu–Ni–Ti alloy. Mater Sci Eng A 913:147070. https://doi.org/10.1016/j.msea.2024.14707010.1016/j.msea.2024.147070 ↗

71. Sathiaraj GD, Bhattacharjee PP, Tsai C-W, Yeh J-W (2016) Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy. Intermetallics 69:1–9. https://doi.org/10.1016/j.intermet.2015.10.00510.1016/j.intermet.2015.10.005 ↗

72. Bracke L, Verbeken K, Kestens LAI (2012) Texture generation and implications in TWIP steels. Scr Mater 66(12):1007–1011. https://doi.org/10.1016/j.scriptamat.2012.02.04810.1016/j.scriptamat.2012.02.048 ↗

73. Bhattacharjee PP, Sathiaraj GD, Zaid M, Gatti JR, Lee C, Tsai C-W, Yeh J-W (2014) Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy. J Alloys Compd 587:544–552. https://doi.org/10.1016/j.jallcom.2013.10.23710.1016/j.jallcom.2013.10.237 ↗

74. Barrales-Mora LA, Lü Y, Molodov DA (2011) Experimental determination and simulation of annealing textures in cold rolled TWIP and TRIP steels. Steel Res Int 82(2):119–126. https://doi.org/10.1002/srin.20100026110.1002/srin.201000261 ↗

75. Haase C, Barrales-Mora LA (2019) From high-manganese steels to advanced high-entropy alloys. Metals. https://doi.org/10.3390/met907072610.3390/met9070726 ↗

76. Feng X, Yang H, Fan R, Zhang W, Meng F, Gan B, Lu Y (2020) Heavily twinned CoCrNi medium-entropy alloy with superior strength and crack resistance. Mater Sci Eng A 788:139591. https://doi.org/10.1016/j.msea.2020.13959110.1016/j.msea.2020.139591 ↗

77. Du H, Cai J-H, Wang Y-S, Yao J-Q, Chen Q, Cui Y, Liu X-W (2022) Effect of partial recrystallization on microstructure and tensile properties of NiFeCoCrMn high-entropy alloy. Trans Nonferrous Met Soc China 32(3):947–956. https://doi.org/10.1016/S1003-6326(22)65841-210.1016/S1003-6326(22)65841-2 ↗

78. Schuh B, Mendez-Martin F, Völker B, George EP, Clemens H, Pippan R, Hohenwarter A (2015) Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation. Acta Mater 96:258–268. https://doi.org/10.1016/j.actamat.2015.06.02510.1016/j.actamat.2015.06.025 ↗