Preparation process of infrared-blue composite laser cladding CoCrFeNi coating on highly reflective copper alloy

1. Lu S, Wang L, Zhou J et al (2022) Microstructure and tribological properties of laser-cladded Co-Ti3SiC2 coating with Ni-based interlayer on copper alloy. Tribol Int 171:107549. https://doi.org/10.1016/j.triboint.2022.10754910.1016/j.triboint.2022.107549 ↗

2. Turchenko VA, Trukhanov AV, Bobrikov IA, Trukhanov SV, Balagurov AM (2015) Study of the crystalline and magnetic structures of BaFe11.4Al0.6O19 in a wide temperature range. J Surf Invest 9:17–23. https://doi.org/10.1134/S102745101501017610.1134/S1027451015010176 ↗

3. Burgess J (2019) Electroplating onto aluminium and its alloys. J Transactions of the IMF 97(6):285–288. https://doi.org/10.1080/00202967.2019.167528010.1080/00202967.2019.1675280 ↗

4. Qadir D, Sharif R, Nasir R et al (2024) A review on coatings through thermal spraying. Chem Pap 78(1):71–91. https://doi.org/10.1007/s11696-023-03089-410.1007/s11696-023-03089-4 ↗

5. Chu M, Xiao H, Ren L et al (2024) Microstructure and properties of Ti–Al–C composite coatings prepared by laser cladding. J Ceram Int 50(7):12498–12509. https://doi.org/10.1016/j.ceramint.2024.01.15910.1016/j.ceramint.2024.01.159 ↗

6. Zhang Y, Bai P, Li Z et al (2024) Multi-objective optimization of laser cladding process parameters for Q345B steel. J Mater Today Commun. https://doi.org/10.1016/j.mtcomm.2024.10867910.1016/j.mtcomm.2024.108679 ↗

7. Spisz EW, Weigand AJ, Bowman RL, et al (1969) Solar absorptances and spectral reflectances of 12 metals for temperatures ranging from 300 to 500/sup 0/K, R. National Aeronautics and Space Administration, Cleveland, Ohio (USA). Lewis Research Center

8. Zhang S, Zhu H, Hu Z et al (2019) Selective laser melting of Cu10Zn alloy powder using high laser power. J Powder Technol 342(15):613–620. https://doi.org/10.1016/j.powtec.2018.10.00210.1016/j.powtec.2018.10.002 ↗

9. Zhang W, Liao H, Hu Z et al (2021) Interfacial characteristics and mechanical properties of additive manufacturing martensite stainless steel on the Cu-Cr alloy substrate by directed energy deposition. J Mater Sci Technol 90:121–132. https://doi.org/10.1016/j.jmst.2021.03.00810.1016/j.jmst.2021.03.008 ↗

10. Wan Z, Wang HP, Li J et al (2022) Effect of beam oscillation frequency on spattering in remote laser stitch welding of thin-gage zinc-coated steel with keyhole penetration. J Mater Process Technol 302:117482. https://doi.org/10.1016/j.jmatprotec.2021.11748210.1016/j.jmatprotec.2021.117482 ↗

11. Zediker MS, Fritz RD, Finuf MJ et al (2019) Stable keyhole welding of 1 mm thick copper with a 600 W blue laser system. J Laser Appl. https://doi.org/10.2351/1.509609210.2351/1.5096092 ↗

12. Sadeghian A, Iqbal N (2022) Blue laser welding of low thickness Ni-coated copper and mild steel for electric vehicle (EV) battery manufacturing. J Opt Laser Technol 155:108415. https://doi.org/10.1016/j.optlastec.2022.10841510.1016/j.optlastec.2022.108415 ↗

13. Asano K, Tsukamoto M, Sechi Y et al (2018) Laser metal deposition of pure copper on stainless steel with blue and IR diode lasers. J Opt Laser Technol 107:291–296. https://doi.org/10.1016/j.optlastec.2018.06.01210.1016/j.optlastec.2018.06.012 ↗

14. Britten SW, Ocylok S (2019) Blues skies for copper cladding with 450nm, C//laser 3D manufacturing VI. SPIE 10909:41–48

15. Yang H, Tang Z, Wan L et al (2023) Achieving crack-free CuCrZr/AlSi7Mg interface by infrared-blue hybrid laser cladding with low power infrared laser. J Alloys Compd 931:167572. https://doi.org/10.1016/j.jallcom.2022.16757210.1016/j.jallcom.2022.167572 ↗

16. Qi ZW, Chen CY, Wang CY, Zhou ZK, Zhou J, Long Y (2023) Effect of different laser wavelengths on laser cladding of pure copper. Surf Coat Technol 454:12918110.1016/j.surfcoat.2022.129181 ↗

17. Yang HH, Tang ZJ, Wan L, Wei QL, Wu JY, Wang A, Jin X, Li X, Wu Y, Lu G, Wang H (2023) Achieving crack-free CuCrZr/AlSi7Mg interface by infrared-blue hybrid laser cladding with low power infrared laser. J Alloys Compd 931:16757210.1016/j.jallcom.2022.167572 ↗

18. Pei X, Du Y, Wang H et al (2022) Investigation of high temperature tribological performance of TiZrV0. 5Nb0. 5 refractory high-entropy alloy optimized by Si microalloying. Tribol Int 176:107885. https://doi.org/10.1016/j.triboint.2022.10788510.1016/j.triboint.2022.107885 ↗

19. Trukhanov AV, Kostishyn VG, Panina LV, Korovushkin VV, Turchenko VA, Thakur P, Thakur A, Yang Y, Vinnik DA, Yakovenko ES, Matzui LY, Trukhanova EL, Trukhanov SV (2018) Control of electromagnetic properties in substituted M-type hexagonal ferrites. J Alloys Compd 754:247–256. https://doi.org/10.1016/j.jallcom.2018.04.15010.1016/j.jallcom.2018.04.150 ↗

20. Almessiere MA, Algarou NA, Slimani Y, Klygach DS, Baykal A, Korkmaz AD, Zubar TI, Silibin MV, Vakhitov MG, UI-Hamid A, Trukhanov SV, Trukhanov AV (2024) Structure, magnetic and electrodynamic properties of SrInxFe12-xO4/Ni0.5Zn0.5Fe2O4 composites at low temperature. J Am Ceram Soc 107:4936–4948. https://doi.org/10.1111/jace.1979810.1111/jace.19798 ↗

21. Liu H, Gao W, Liu J et al (2020) Microstructure and properties of CoCrFeNiTi high-entropy alloy coating fabricated by laser cladding. J Mater Eng Perform 29:7170–7178. https://doi.org/10.1007/s11665-020-05204-y10.1007/s11665-020-05204-y ↗

22. Tishkevich DI, Vorobjova AI, Shimanovich DL, Vinnik DA, Zubar TI, Kozlovskiy AL, Zdorovets MV, Yakimchuk DV, Trukhanov SV, Trukhanov AV (2019) Formation and corrosion properties of Ni-BASED composite material in the anodic alumina porous matrix. J Alloys Compd 804:139–146. https://doi.org/10.1016/j.jallcom.2019.07.00110.1016/j.jallcom.2019.07.001 ↗

23. Alshammari DA, El-Gawad HHA, Abdullah M, Manzoor S, El-Bahy ZM, Alzahrani HA, Raza N, Henaish AMA, Trukhanov S, Sayyed MI, Tishkevich D, Trukhanov A (2024) CuTe supported on graphitic carbon nitride nanocomposite as an effective electrocatalyst for oxidation of water in basic media. J Electroanal Chem 953:118018. https://doi.org/10.1016/j.jelechem.2023.11801810.1016/j.jelechem.2023.118018 ↗

24. Zhang M, Zhang X, Niu M et al (2022) High-temperature tribological behavior of CoCrFeNiV high-entropy alloys: a parallel comparison with CoCrFeNiMn high-entropy alloys. Tribol Int 174:107736. https://doi.org/10.1016/j.triboint.2022.10773610.1016/j.triboint.2022.107736 ↗

25. Zhang S, Han B, Li M et al (2021) Investigation on solid particles erosion resistance of laser cladded CoCrFeNiTi high entropy alloy coating. J Intermetallics 131:107111. https://doi.org/10.1016/j.intermet.2021.10711110.1016/j.intermet.2021.107111 ↗

26. Zhang Q, Li M, Wang Q et al (2023) Investigation of the microstructure and properties of CoCrFeNiMo high-entropy alloy coating prepared through high-speed laser cladding. Coatings 13(7):1211. https://doi.org/10.3390/coatings1307121110.3390/coatings13071211 ↗

27. Li RL, Li J, Yan YN et al (2023) Tribocorrosion resistance of CoCrFeNiNbx laser-clad coatings in the neutral and acid solutions. J Opt Laser Technol 158:108817. https://doi.org/10.1016/j.optlastec.2022.10881710.1016/j.optlastec.2022.108817 ↗

28. Zhang Q, Han B, Li M et al (2023) Comparison of CoCrFeNi coatings prepared via high-speed laser cladding and normal laser cladding on microstructure and properties. Intermetallics. https://doi.org/10.1016/j.intermet.2022.10779510.1016/j.intermet.2022.107795 ↗

29. Yu P, Kou S, Lin CM (2023) Solidification and liquation cracking in welds of high entropy CoCrFeNiCux alloys. Materials 16(16):5621. https://doi.org/10.3390/ma1616562110.3390/ma16165621 ↗

30. Troyanchuk IO, Trukhanov SV, Szymczak H, Przewoznik J, Bärner K (2001) Phase transitions in La1-xCaxMnO3-x/2 manganites. J Exp Theor Phys 93:161–167. https://doi.org/10.1134/1.139153310.1134/1.1391533 ↗

31. Zubar TI, Usovich TI, Tishkevich DI, Kanafyev OD, Fedkin VA, Kotelnikova AN, Panasyuk MI, Kurochka AS, Nuriev AV, Idris AM, Khandaker MU, Trukhanov SV, Fedosyuk VM, Trukhanov AV (2022) Features of galvanostatic electrodeposition of NiFe films with composition gradient: influence of substrate characteristics. Nanomaterials 12:2926. https://doi.org/10.3390/nano1217292610.3390/nano12172926 ↗

32. Qi Z, Chen C, Wang C et al (2023) Effect of different laser wavelengths on laser cladding of pure copper. Surf Coat Tech 454:129181. https://doi.org/10.1016/j.surfcoat.2022.12918110.1016/j.surfcoat.2022.129181 ↗

33. Liu Y, Tan N, Li Y et al (2024) Microstructure, hardness, and tribological properties of CoCrFeNiX (X =Mo, Ti, W) high entropy alloy coating by red-blue composite laser cladding on copper alloy. Surf Coat Technol 483:130761. https://doi.org/10.1016/j.surfcoat.2024.13076110.1016/j.surfcoat.2024.130761 ↗

34. Asano K, Tsukamoto M, Funada Y et al (2018) Copper film formation on metal surfaces with 100 W blue direct diode laser system. J Laser Appl. https://doi.org/10.2351/1.504063510.2351/1.5040635 ↗

35. Pan C, Li X, Zhang R, Lu C et al (2021) Research on microstructural and property evolution in laser cladded HAZ. J Surf Eng 37:1514–1522. https://doi.org/10.1080/02670844.2021.192973710.1080/02670844.2021.1929737 ↗

36. Yang H, Tang X, Hu C et al (2021) Study on laser welding of copper material by hybrid light source of blue diode laser and fiber laser. J Laser Appl. https://doi.org/10.2351/7.000038610.2351/7.0000386 ↗

37. Zhu L, Xue P, Lan Q et al (2021) Recent research and development status of laser cladding: a review. Opt Laser Technol 138:106915. https://doi.org/10.1016/j.optlastec.2021.10691510.1016/j.optlastec.2021.106915 ↗

38. Cai Y, Chen Y, Manladan SM et al (2018) Influence of dilution rate on the microstructure and properties of FeCrCoNi high-entropy alloy coating. J Mater Des 142:124–137. https://doi.org/10.1016/j.matdes.2018.01.00710.1016/j.matdes.2018.01.007 ↗

39. Das AK (2022) Recent trends in laser cladding and alloying on magnesium alloys: a review. J Mater Today Proc 51:723–727. https://doi.org/10.1016/j.matpr.2021.06.21710.1016/j.matpr.2021.06.217 ↗

40. Trukhanov SV (2005) Investigation of stability of ordered manganites. J Exp Theor Phys 101:513–520. https://doi.org/10.1134/1.210322010.1134/1.2103220 ↗

41. Yang H, Wu J, Wei Q et al (2022) Stable cladding of high reflectivity pure copper on the aluminum alloy substrate by an infrared-blue hybrid laser. Addit Manuf Lett 3:10004010.1016/j.addlet.2022.100040 ↗

42. Turchenko VA, Trukhanov SV, Kostishin VG, Damay F, Porcher F, Klygach DS, Vakhitov MG, Lyakhov D, Michels D, Bozzo B, Fina I, Almessiere MA, Slimani Y, Baykal A, Zhou D, Trukhanov AV (2021) Features of structure, magnetic state and electrodynamic performance of SrFe12-xInxO19. Sci Rep 11:18342. https://doi.org/10.1038/s41598-021-97684-810.1038/s41598-021-97684-8 ↗

43. Zheng H, Chen R, Qin G et al (2020) Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification. J Mater Sci Technol 38:19–27. https://doi.org/10.1016/j.jmst.2019.08.01910.1016/j.jmst.2019.08.019 ↗

44. Trukhanov SV (2005) Peculiarities of the magnetic state in the system La0.70Sr0.30MnO3-γ (0 ≤ γ ≤ 0.25). J Exp Theor Phys 100:95–105. https://doi.org/10.1134/1.186620210.1134/1.1866202 ↗

45. Mei L, Yan D, Xie S et al (2020) Effects of Cr2O3 active agent on the weld process dynamic behavior and joint comprehensive properties of fiber laser welded stainless steel thick plate. Opt Lasers Eng 128:106027. https://doi.org/10.1016/j.optlaseng.2020.10602710.1016/j.optlaseng.2020.106027 ↗

46. Chen X, Zhang X, Pang S et al (2018) Vapor plume oscillation mechanisms in transient keyhole during tandem dual beam fiber laser welding. J Opt Lasers Eng 100:239–247. https://doi.org/10.1016/j.optlaseng.2017.09.01010.1016/j.optlaseng.2017.09.010 ↗

47. Yang H, Jing G, Gao P et al (2020) Effects of circular beam oscillation technique on formability and solidification behaviour of selective laser melted Inconel 718: from single tracks to cuboid samples. J Mater Sci Technol 51:137–150. https://doi.org/10.1016/j.jmst.2019.09.04410.1016/j.jmst.2019.09.044 ↗

48. Wang D, Wu S, Fu F et al (2017) Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties. J Mater Des 117:121–130. https://doi.org/10.1016/j.matdes.2016.12.06010.1016/j.matdes.2016.12.060 ↗

49. Gunenthiram V, Peyre P, Schneider M et al (2018) Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process. J Mater Process Technol 251:376–386. https://doi.org/10.1016/j.jmatprotec.2017.08.01210.1016/j.jmatprotec.2017.08.012 ↗