Effect of prolonged re-tempering on the tribological properties of quenched and tempered AISI 4140 steel

1. Hafeez M, Farooq A (2019) Effect of heat treatments on the mechanical and electrochemical corrosion behavior of 38CrSi and AISI 4140 steels. Metallogr Microstruct Anal 8:479–48710.1007/s13632-019-00556-x ↗

2. Bhagyalaxmi B, Sharma S, Kini V (2018) Effect of heat treatment and mechanical characterization of AISI 4140 steel. Int J Mech Prod Eng Res Dev. 8:603–610. https://doi.org/10.24247/ijmperddec20186310.24247/ijmperddec201863 ↗

3. Çalık A, Dokuzlar O, Uçar N (2020) The effect of heat treatment on mechanical properties of 42crmo4 steel. J Achiev Mater Manuf Eng 98:5–10. https://doi.org/10.5604/01.3001.0014.081110.5604/01.3001.0014.0811 ↗

4. Hafeez MA, Inam A, Farooq A (2020) Mechanical and corrosion properties of medium carbon low alloy steel after cyclic quenching and tempering heat-treatments. Mater Res Express 7:16553. https://doi.org/10.1088/2053-1591/ab658110.1088/2053-1591/ab6581 ↗

5. Khani Sanij MH, Ghasemi Banadkouki SS, Mashreghi AR, Moshrefifar M (2012) The effect of single and double quenching and tempering heat treatments on the microstructure and mechanical properties of AISI 4140 steel. Mater Des 42:339–346. https://doi.org/10.1016/j.matdes.2012.06.01710.1016/j.matdes.2012.06.017 ↗

6. Wood WE (1975) Effect of heat treatment on the fracture toughness of low alloy steels. Eng Fract Mech. https://doi.org/10.1016/0013-7944(75)90003-X10.1016/0013-7944(75)90003-X ↗

7. Bakhsheshi HR, Monshi A, Monajatizadeh H, Idris MH, Abdul Kadir MR, Jafari H (2011) Effect of multi-step tempering on retained austenite and mechanical properties of low alloy steel. J Iron Steel Res Int 18:49–56. https://doi.org/10.1016/S1006-706X(12)60009-010.1016/S1006-706X(12)60009-0 ↗

8. Malheiros LRC, Rodriguez EAP, Arlazarov A (2017) Mechanical behavior of tempered martensite: characterization and modeling. Mater Sci Eng A 706:38–47. https://doi.org/10.1016/j.msea.2017.08.08910.1016/j.msea.2017.08.089 ↗

9. Oluyemia DO, Oluwole OI, Adewuyi BO (2011) Studies of the properties of heat treated rolled medium carbon steel. Mater Res 14:135–141. https://doi.org/10.1590/S1516-1439201100500004010.1590/S1516-14392011005000040 ↗

10. Gurumurthy BM, Gowrishankar MC, Sharma S, Kini A, Shettar M, Hiremath P (2020) Microstructure authentication on mechanical property of medium carbon low alloy duplex steels. J Mater Res Technol 9:5105–511110.1016/j.jmrt.2020.03.027 ↗

11. Badaruddin M, Sugiyanto, Wardono H, Andoko, Wang CJ, Rivai AK (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Int J Fatigue 125:406–417. https://doi.org/10.1016/j.ijfatigue.2019.04.02010.1016/j.ijfatigue.2019.04.020 ↗

12. Meysami AH, Ghasemzadeh R, Seyedein SH, Aboutalebi MR (2010) An investigation on the microstructure and mechanical properties of direct-quenched and tempered AISI 4140 steel. Mater Des 31:1570–1575. https://doi.org/10.1016/j.matdes.2009.09.04010.1016/j.matdes.2009.09.040 ↗

13. Xiong X, Yang F, Zou X, Suo J (2012) Effect of twice quenching and tempering on the mechanical properties and microstructures of SCRAM steel for fusion application. J Nucl Mater 430:114–118. https://doi.org/10.1016/j.jnucmat.2012.06.04710.1016/j.jnucmat.2012.06.047 ↗

14. Aguilera-Camacho LD, Hernández-Sierra MT, García-Miranda JS, Moreno KJ (2021) On the influence of tribological properties of AISI 4140 annealed steel against ceramic counterparts under dry and lubricated conditions and their effect on steel microstructure. Metals. https://doi.org/10.3390/met1108127510.3390/met11081275 ↗

15. Nagarajan VR, Putatunda SK, Boileau J (2017) Fatigue crack growth behavior of austempered AISI 4140 steel with dissolved hydrogen. Metals. https://doi.org/10.3390/met711046610.3390/met7110466 ↗

16. Fereiduni E, Ghasemi Banadkouki SS (2014) Improvement of mechanical properties in a dual-phase ferrite–martensite AISI4140 steel under tough-strong ferrite formation. Mater Des 56:232–240. https://doi.org/10.1016/j.matdes.2013.11.00510.1016/j.matdes.2013.11.005 ↗

17. Saeidi N, Ekrami A (2009) Comparison of mechanical properties of martensite/ferrite and bainite/ferrite dual phase 4340 steels. Mater Sci Eng A 523:125–129. https://doi.org/10.1016/j.msea.2009.06.05710.1016/j.msea.2009.06.057 ↗

18. Bilal MM, Yaqoob K, Zahid MH, haq E, Tanveer WH, Wadood A, Ahmed B (2019) Effect of austempering conditions on the microstructure and mechanical properties of AISI 4340 and AISI 4140 steels. J Mater Res Technol 8:5194–5200. https://doi.org/10.1016/j.jmrt.2019.08.04210.1016/j.jmrt.2019.08.042 ↗

19. Badaruddin M, Sugiyanto, Sumardi S, Asmi D (2024) Improvement of the fatigue crack growth resistance in AISI 4140 steel under single- and multi-austempering heat treatments. Res Eng 21:101814. https://doi.org/10.1016/j.rineng.2024.10181410.1016/j.rineng.2024.101814 ↗

20. Kumar A, Blessto B, Singh A (2022) Effect of austempering temperature on high cycle fatigue behaviour in nanostructured bainitic steels. Mater Sci Eng A 846:143296. https://doi.org/10.1016/j.msea.2022.14329610.1016/j.msea.2022.143296 ↗

21. Basori I, Masitah I, Susetyo FB, Nanto D (2024) The effect of quenching process on the microstructure and hardness of AISI 4140 steel. J Phys Conf Ser. https://doi.org/10.1088/1742-6596/2866/1/01202010.1088/1742-6596/2866/1/012020 ↗

22. Kowal M, Szala M (2020) Diagnosis of the microstructural and mechanical properties of over century-old steel railway bridge components. Eng Fail Anal 110:104447. https://doi.org/10.1016/j.engfailanal.2020.10444710.1016/j.engfailanal.2020.104447 ↗

23. Kovacı H, Baran Ö, Bayrak Ö, Yetim AF, Çelik A (2017) Influence of plasma nitriding treatment on the adhesion of DLC films deposited on AISI 4140 steel by PVD magnetron sputtering. J Adhes Sci Technol 31:2015–2027. https://doi.org/10.1080/01694243.2017.129392310.1080/01694243.2017.1293923 ↗

24. Li X, He L, Li Y, Yang Q (2020) Diamond deposition on iron and steel substrates: a review. Micromachines. https://doi.org/10.3390/mi1108071910.3390/mi11080719 ↗

25. Astm (2009) Standard practice for X-ray determination of retained austenite in steel with near random crystallographic orientation 1. Astm. 3: 1–7. https://doi.org/10.1520/E0975-13.necessary10.1520/E0975-13.necessary ↗

26. Gojic M, Kosec L, Matkovic P (1998) The effect of tempering temperature on mechanical properties and microstructure of low alloy Cr and CrMo steel. J Mater Sci 33:395–403. https://doi.org/10.1023/A:100437591459110.1023/A:1004375914591 ↗

27. Szala M, Winiarski G, Wójcik Ł, Bulzak T (2020) Effect of annealing time and temperature parameters on the microstructure, hardness, and strain-hardening coefficients of 42CrMo4 steel. Materials. https://doi.org/10.3390/ma1309202210.3390/ma13092022 ↗

28. Lee S, Su T (1999) Mechanical properties and microstructural features of AISI 4340 high-strength alloy steel under quenched and tempered conditions. J Mater Process Technol 87:198–206. https://doi.org/10.1016/S0924-0136(98)00351-310.1016/S0924-0136(98)00351-3 ↗

29. Park J, Jeon J, Seo N, Kang S, Son SB, Lee SJ, Jung JG (2023) Microstructure and mechanical behavior of AISI 4340 steel fabricated via spark plasma sintering and post-heat treatment. Mater Sci Eng A 862:144433. https://doi.org/10.1016/j.msea.2022.14443310.1016/j.msea.2022.144433 ↗

30. Wei MX, Wang SQ, Wang L, Cui XH, Chen KM (2011) Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel. Tribol Int 44:898–905. https://doi.org/10.1016/j.triboint.2011.03.00510.1016/j.triboint.2011.03.005 ↗

31. Park SG, Kim MC, Lee BS, Wee DM (2010) Correlation of the thermodynamic calculation and the experimental observation of Ni–Mo–Cr low alloy steel changing Ni, Mo, and Cr contents. J Nucl Mater 407:126–13510.1016/j.jnucmat.2010.09.004 ↗

32. Ren Q, Kou Z, Wu J, Hou T, Xu P (2023) Effect of tempering temperature on microstructure and mechanical properties of 35CrMo steel. Metals. https://doi.org/10.3390/met1304077110.3390/met13040771 ↗

33. Abbasi E, Luo Q, Owens D (2019) Microstructural characteristics and mechanical properties of low-alloy, medium-carbon steels after multiple tempering. Acta Metallurgica Sinica 32:74–88. https://doi.org/10.1007/s40195-018-0805-610.1007/s40195-018-0805-6 ↗

34. Darwish FA, Pereira LC, Gatts C, Graça ML (1991) On the tempered martensite embrittlement in AISI 4140 low alloy steel. Mater Sci Eng A 132:L5–L9. https://doi.org/10.1016/0921-5093(91)90388-410.1016/0921-5093(91)90388-4 ↗

35. Tkachev E, Borisov S, Belyakov A, Kniaziuk T, Vagina O, Gaidar S, Kaibyshev R (2023) Effect of quenching and tempering on structure and mechanical properties of a low-alloy 0.25C steel. Mater Sci Eng A 868:144757. https://doi.org/10.1016/j.msea.2023.14475710.1016/j.msea.2023.144757 ↗

36. Li Z, Liu Y, Zhang R, Luo C, Qi H (2021) Study on impact fracture behavior of G18CrMo2-6 steel after tempering. Proc Inst Mech Eng Part L J Mater Des Appl 235:2627–2636. https://doi.org/10.1177/1464420721100858210.1177/14644207211008582 ↗

37. Li H, Hu J, Li J, Chen G, Sun X (2013) Effect of tempering temperature on microstructure and mechanical properties of AISI 6150 steel. J Cent South Univ 20:866–870. https://doi.org/10.1007/s11771-013-1559-y10.1007/s11771-013-1559-y ↗

38. Ulutan M, Celik ON, Gasan H, Er U (2010) Effect of different surface treatment methods on the friction and wear behavior of AISI 4140 steel. J Mater Sci Technol 26:251–25710.1016/S1005-0302(10)60042-4 ↗

39. Podgornik B, Vižintin J, Wänstrand O, Larsson M, Hogmark S, Ronkainen H, Holmberg K (2001) Tribological properties of plasma nitrided and hard coated AISI 4140 steel. Wear 249:254–259. https://doi.org/10.1016/S0043-1648(01)00564-610.1016/S0043-1648(01)00564-6 ↗

40. Chen Y, Ye C, Chen X, Zhai Q, Hu H (2024) Effect of alloying and microalloying elements on carbides of high-speed steel: an overview. Metals. https://doi.org/10.3390/met1402017510.3390/met14020175 ↗

41. Xia T, Ma Y, Zhang Y, Li J, Xu H (2024) Effect of Mo and Cr on the microstructure and properties of low-alloy wear-resistant steels. Materials. https://doi.org/10.3390/ma1710240810.3390/ma17102408 ↗

42. Ali M, Porter D, Kömi J, Eissa M, El Faramawy H, Mattar T (2019) Effect of cooling rate and composition on microstructure and mechanical properties of ultrahigh-strength steels. J Iron Steel Res Int 26:1350–1365. https://doi.org/10.1007/s42243-019-00276-010.1007/s42243-019-00276-0 ↗

43. Song Y, Zhang H, Ren L (2024) A review of research on MnS inclusions in high-quality steel. Eng Rep 6:e12892. https://doi.org/10.1002/eng2.1289210.1002/eng2.12892 ↗

44. Huh S, Heo Y-U, Lee JS, Yim C-H (2023) The role of sulfide growth on the segregation behavior of sulfur at the grain boundary in a high-nickel steel. Mater Charact 199:11284510.1016/j.matchar.2023.112845 ↗

45. İpekçi A, Kam M, Argun K (2022) Surface roughness performance of Cu electrode on hardened AISI 4140 steels in EDM process. J Chinese Soc Mech Eng Trans Chinese Inst Eng Ser C/Chung-Kuo Chi Hsueh K. Ch’eng Hsuebo Pao. 43: 355–362

46. Kam M, Demirtas M (2021) Experimental analysis of the effect of mechanical properties and microstructure on tool vibration and surface quality in dry turning of hardened AISI 4340 steels. Surf Rev Lett 28:2150041. https://doi.org/10.1142/S0218625X2150041410.1142/S0218625X21500414 ↗