Study on deformation and fracture behavior of TC17 titanium alloy by finite element model based on mapping EBSD data

1. Sasaki L, Hénaff G, Arzaghi M, Villechaise P, Delfosse J (2017) Effect of long term aging on the fatigue crack propagation in the β titanium alloy Ti17. Mater Sci Eng A 707:253–258. https://doi.org/10.1016/j.msea.2017.09.05210.1016/j.msea.2017.09.052 ↗

2. Gerhard W, Boyer RR, Collings EW (1994) Materials properties handbook: titanium alloys

3. Zhang G, Xiong H, Yu H, Qin R, Yuan H (2020) Microstructure evolution and mechanical properties of wire-feed electron beam additive manufactured Ti–5Al–2Sn–2Zr–4Mo–4Cr alloy with different subtransus heat treatments. Mater Des 195(10):109063. https://doi.org/10.1016/j.matdes.2020.10906310.1016/j.matdes.2020.109063 ↗

4. Guo ZG, Ma TJ, Yang XW, Tao J, Li J, Li WY, Vairis A (2023) In-situ investigation on dislocation slip concentrated fracture mechanism of linear friction welded dissimilar Ti17(α+β)/Ti17(β) titanium alloy joint. Mater Sci Eng A 872:144991. https://doi.org/10.1016/j.msea.2023.14499110.1016/j.msea.2023.144991 ↗

5. Guo ZG, Ma TJ, Li WY, Zhang Y, Zhao PK, Tao J, Kang WJ (2021) Intergrowth bonding mechanism and mechanical property of linear friction welded dissimilar near-alpha to near-beta titanium alloy joint. Adv Eng Mater 23:2001479. https://doi.org/10.1002/adem.20200147910.1002/adem.202001479 ↗

6. Zhang GD, Xiong HP, Yu H, Qin RY, Liu W, Yuan H (2020) Microstructure evolution and mechanical properties of wire-feed electron beam additive manufactured Ti–5Al–2Sn–2Zr–4Mo–4Cr alloy with different subtransus heat treatments. Mater Des 195:109063. https://doi.org/10.1016/j.matdes.2020.10906310.1016/j.matdes.2020.109063 ↗

7. Cai J, Guo M, Peng P, Han P, Yang XK, Ding B, Qiao K, Wang KS, Wang W (2021) Research on hot deformation behavior of as-forged TC17 titanium alloy. J Materi Eng Perform 30:7259–7274. https://doi.org/10.1007/s11665-021-05942-710.1007/s11665-021-05942-7 ↗

8. Li G, Ke L, Ren XC, Sun CQ (2023) High cycle and very high cycle fatigue of TC17 titanium alloy: stress ratio effect and fatigue strength modeling. Int J Fatigue 166:107299. https://doi.org/10.1016/j.ijfatigue.2022.10729910.1016/j.ijfatigue.2022.107299 ↗

9. Lu YL, Jiang JL, Wang H, Dang HR, He MH (2024) Study on low fatigue damage behavior of TC17 titanium alloy with basket-weave microstructure. Int J Fatigue 187:108462. https://doi.org/10.1016/j.ijfatigue.2024.10846210.1016/j.ijfatigue.2024.108462 ↗

10. Liang S, Teng J, Li JH, Zhang Q, Chen J (2024) Effect of solution aging heat treatment on microstructure evolution and properties of TC17 titanium alloy formed by laser solid forming. J Mater Eng Perform 33:2002–2014. https://doi.org/10.1007/s11665-023-08075-110.1007/s11665-023-08075-1 ↗

11. Wang JL, Ma YX, Peng WJ, Bao YJ, Shi ZY (2023) Evaluation of the effect of surface roughness parameters on fatigue of TC17 titanium alloy impeller using machine learning algorithm and finite element analysis. Eng Fail Anal 153:107586. https://doi.org/10.1016/j.engfailanal.2023.10758610.1016/j.engfailanal.2023.107586 ↗

12. Yang X, Zhao JF, Du B, Guo YZ, Li YL (2024) The yielding and plastic flow behavior of TC17 alloy under tension/compression-torsion loading at high strain rates. Acta Mech Sin 40:423420. https://doi.org/10.1007/s10409-023-23420-x10.1007/s10409-023-23420-x ↗

13. Li ZL, Kang QX, Sui XC, Xu XH, Zhan LQ, Wang GF (2023) Analysis of the mechanism of orientations evolution during hot rolling and mechanical properties of TiBw/TA15 composites based on crystal plasticity finite element model. J Mater Sci Technol 167:137–151. https://doi.org/10.1016/j.jmst.2023.05.02310.1016/j.jmst.2023.05.023 ↗

14. Zhang JY, Du SY, Ding SR (2022) Crystal plasticity finite element modeling of twin band formation and evolution together with the macroscale mechanical responses of hexagonal metals. Mater Sci Eng A 855:143856. https://doi.org/10.1016/j.msea.2022.14385610.1016/j.msea.2022.143856 ↗

15. Demir E, Horton EW, Mokhtarishirazabad M, Mostafavi M, Knowles D (2023) Grain size and shape dependent crystal plasticity finite element model and its application to electron beam welded SS316L. J Mech Phys Solids 178:105331. https://doi.org/10.1016/j.jmps.2023.10533110.1016/j.jmps.2023.105331 ↗

16. Mokhtarishirazabad M, McMillan VVD, Simpson C, Agius D, Truman C, Knowles D, Mostafavi M (2023) Predicting residual stress in a 316L electron beam weld joint incorporating plastic properties derived from a crystal plasticity finite element model. Int J Press Vessels Pip 201:104868. https://doi.org/10.1016/j.ijpvp.2022.10486810.1016/j.ijpvp.2022.104868 ↗

17. Wu C, Yang H, Li HW (2013) Modeling of discontinuous dynamic recrystallization of a near-α titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method. Comput Mater Sci 79:944–959. https://doi.org/10.1016/j.commatsci.2013.08.00410.1016/j.commatsci.2013.08.004 ↗

18. Liu CS, Xu WJ, Niu TH, Chen YT (2022) Roughness evolution of constrained surface based on crystal plasticity finite element model and coupled Eulerian-Lagrangian method. Comput Mater Sci 201:110900. https://doi.org/10.1016/j.commatsci.2021.11090010.1016/j.commatsci.2021.110900 ↗

19. Aburakhia A, Bonakdar A, Molavi-Zarandi M, Kelleher J, Abdolvand H (2022) Deformation mechanisms of additively manufactured Hastelloy-X: a neutron diffraction experiment and crystal plasticity finite element modeling. Mater Des 222:111030. https://doi.org/10.1016/j.matdes.2022.11103010.1016/j.matdes.2022.111030 ↗

20. Wang DD, Fan QB, Cheng XW, Zhou Y, Shi R, Qian Y, Wang L, Zhu XJ, Gong HC, Chen K, Yuan JJ, Yang L (2022) Texture evolution and slip mode of a Ti–5.5Mo–7.2Al–4.5Zr–2.6Sn–2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model. J Mater Sci Technol 111:76–87. https://doi.org/10.1016/j.jmst.2021.09.03010.1016/j.jmst.2021.09.030 ↗

21. Gao DX, Shen Z, Chen K, Zhou X, Liu H, Wang JY, Li YX, Liu ZX, Deng HQ, Wang WY, Zeng XQ (2025) Review of progress in calculation and simulation of high-temperature oxidation. Prog Mater Sci 147:101348. https://doi.org/10.1016/j.pmatsci.2024.10134810.1016/j.pmatsci.2024.101348 ↗

22. Ju J, Yu HY, Zhao YL, Yang T, Xiao B, Peng P, Wang R, Wang H, Zeng XQ, Wang J, Shen Z (2023) Understanding the oxidation behaviors of a Ni–Co-based superalloy at elevated temperatures through multiscale characterization. Corros Sci 227:111800. https://doi.org/10.1016/j.corsci.2023.11180010.1016/j.corsci.2023.111800 ↗

23. Wang ZP, Shen Z, Liu Y, Zhao YH, Zhu QC, Chen YW, Wang JY, Li YX, Lozano-Perez S, Zeng XQ (2024) The effect of LPSO phase on the high-temperature oxidation of a stainless Mg–Y–Al alloy. J Magnesium Alloys 12(10):4045–4052. https://doi.org/10.1016/j.jma.2024.07.00910.1016/j.jma.2024.07.009 ↗

24. Kar SK, Suman S, Shivaprasad S, Chaudhuri A, Bhattacharjee A (2014) Processing-microstructure-yield strength correlation in a near β Ti alloy, Ti–5Al–5Mo–5V–3Cr. Mater Sci Eng A 610:171–180. https://doi.org/10.1016/j.msea.2014.04.11310.1016/j.msea.2014.04.113 ↗

25. Castany P, Pettinari-Sturmel F, Crestou J, Douin J, Coujou A (2007) Experimental study of dislocation mobility in a Ti–6Al–4V alloy. Acta Mater 55(18):6284–6291. https://doi.org/10.1016/j.actamat.2007.07.03210.1016/j.actamat.2007.07.032 ↗

26. Castany P, Pettinari-Sturmel F, Douin J, Coujou A (2008) In situ transmission electron microscopy deformation of the titanium alloy Ti–6Al–4V: interface behaviour. Mater Sci Eng A 483–484:719–722. https://doi.org/10.1016/j.msea.2006.10.18310.1016/j.msea.2006.10.183 ↗

27. Matsumoto H, Yoshida S, Sase R, Hanayama Y (2023) Crystallographic rotation of Ti–6Al–4V alloy with a <101¯0> fiber texture component under isothermal forging through experimental and CPFEM analyses. Materialia 30:101839. https://doi.org/10.1016/j.mtla.2023.10183910.1016/j.mtla.2023.101839 ↗

28. Kalidindi SR, Bronkhorst CA, Anand L (1992) Crystallographic texture evolution in bulk deformation processing of FCC metals. J Mech Phys Solids 40(3):537–569. https://doi.org/10.1016/0022-5096(92)80003-910.1016/0022-5096(92)80003-9 ↗

29. Kothari M, Anand L (1998) Elasto-viscoplastic constitutive equations for polycrystalline metals: application to tantalum. J Mech Phys Solids 46:51–6710.1016/S0022-5096(97)00037-9 ↗

30. Xiao X, Mao Y, Qin DQ, Wang XC, Fu L (2023) Effects of microstrcture composition and orientation on micro mechanical property of linear friction welding joint weld zone for heteromorphic TC17 titanium alloy. J Mater Sci 58(41):16208–16224. https://doi.org/10.1007/s10853-023-09008-y10.1007/s10853-023-09008-y ↗

31. Dao M, Chollacoop N, Van Vliet KJ, Venkatesh TA, Suresh S (2001) Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater 49(19):3899–3918. https://doi.org/10.1016/S1359-6454(01)00295-610.1016/S1359-6454(01)00295-6 ↗

32. Ogasawara N, Chiba N, Chen X (2006) Measuring the plastic properties of bulk materials by single indentation test. Scr Mater 54(1):65–70. https://doi.org/10.1016/j.scriptamat.2005.09.00910.1016/j.scriptamat.2005.09.009 ↗

33. Liu KQ, Ostadhassan M, Bubach B (2016) Applications of nano-indentation methods to estimate nanoscale mechanical properties of shale reservoir rocks. J Nat Gas Sci Eng 35(A):1310–2131. https://doi.org/10.1016/j.jngse.2016.09.06810.1016/j.jngse.2016.09.068 ↗

34. Liu KQ, Jin ZJ, Zakharova N, Zeng LB, Haghshenas M, Adeyilola A, Saurabh S (2023) Comparison of shale fracture toughness obtained from scratch test and nanoindentation test. Int J Rock Mech Min Sci 162:105282. https://doi.org/10.1016/j.ijrmms.2022.10528210.1016/j.ijrmms.2022.105282 ↗

35. Nguyen VD, Béchet E, Geuzaine C, Noels L (2012) Imposing periodic boundary condition on arbitrary meshes by polynomial interpolation. Comput Mater Sci 55:390–406. https://doi.org/10.1016/j.commatsci.2011.10.01710.1016/j.commatsci.2011.10.017 ↗

36. Ramazani A, Mukherjee K, Prahl U, Bleck W (2012) Modelling the effect of microstructural banding on the flow curve behaviour of dual-phase (DP) steels. Comput Mater Sci 52(1):46–54. https://doi.org/10.1016/j.commatsci.2011.05.04110.1016/j.commatsci.2011.05.041 ↗