Early breakdown of Hall–Petch strengthening in eutectic medium-entropy alloys
Source abstract
Abstract
Eutectic medium-entropy alloys (EMEAs) present a pathway to overcome the strength–ductility trade-off, yet their nanoscale scaling laws remain unexplored. Using large-scale molecular dynamics simulations, we investigate size-dependent deformation in dual-phase AlCrFeNi EMEAs across varying interlamellar spacings. Results reveal a non-monotonic yield strength scaling, where traditional Hall–Petch strengthening transitions to inverse Hall–Petch softening at a critical spacing of approximately 192 nm. Notably, this breakdown occurs at a length scale over an order of magnitude larger than the ∼10 nm threshold typical of single-phase nanocrystalline metals. Atomistic analysis demonstrates that this mechanical transition originates from a fundamental shift in the dominant plasticity mechanism, where interphase boundaries evolve from rigid barriers that facilitate dislocation pile-up to active, compliant sites that mediate boundary-controlled deformation. These findings provide a theoretical framework for the structural optimization of nanostructured MEAs, highlighting a new regime for designing ultra-strong, damage-tolerant heterogeneous materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Yeh J-W, Chen S-K, Lin S-J, Gan J-Y, Chin T-S, Shun T-T, Tsau C-H, Chang S-Y (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater 6(5):299–30310.1002/adem.200300567 ↗
2. Huang P-K, Yeh J-W, Shun T-T, Chen S-K (2004) Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating. Adv Eng Mater 6(1–2):74–7810.1002/adem.200300507 ↗
3. Cantor B, Chang ITH, Knight P, Vincent AJB (2004) Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng A 375:213–21810.1016/j.msea.2003.10.257 ↗
4. Lu Y, Dong Y, Guo S, Jiang L, Kang H, Wang T, Wen B, Wang Z, Jie J, Cao Z et al (2014) A promising new class of high-temperature alloys: eutectic high-entropy alloys. Sci Rep 4(1):620010.1038/srep06200 ↗
5. Shi P, Ren W, Zheng T, Ren Z, Hou X, Peng J, Hu P, Gao Y, Zhong Y, Liaw PK (2019) Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae. Nat Commun 10(1):48910.1038/s41467-019-08460-2 ↗
6. Shi P, Li R, Li Y, Wen Y, Zhong Y, Ren W, Shen Z, Zheng T, Peng J, Liang X et al (2021) Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys. Science 373(6557):912–91810.1126/science.abf6986 ↗
7. Wu Q, He F, Li J, Kim HS, Wang Z, Wang J (2022) Phase-selective recrystallization makes eutectic high-entropy alloys ultra-ductile. Nat Commun 13(1):469710.1038/s41467-022-32444-4 ↗
8. Ji W, Gao S, Jarlöv A, Shen X, Tian Y, Wu MS, Gao H, Zhou K (2025) Designing maximal strength in nanolamellar eutectic high-entropy alloys. Adv Mater 37(35):250014910.1002/adma.202500149 ↗
9. Ren J, Wu M, Li C, Guan S, Dong J, Forien J-B, Li T, Shanks KS, Yu D, Chen Y et al (2023) Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy. Acta Mater 257:11917910.1016/j.actamat.2023.119179 ↗
10. Zheng M, Li C, Zhang X, Ye Z, Liao Y, Gu J (2023) Design of a novel (CoCrNi)$$84.5$$Al$$15.5$$ eutectic medium-entropy alloy with hierarchically nano-lamellar microstructure through additively manufactured compositionally graded materials. Mater Sci Eng A 878:14520910.1016/j.msea.2023.145209 ↗
11. Dong Y, Chen Z, Zheng H (2025) Lamellar to eutectic colony transition and its contribution to the strengthening of directionally solidified AlCrFeNi$$_3$$ eutectic medium entropy alloy. J Alloy Compd 18569210.1016/j.jallcom.2025.185692 ↗
12. Xue Y, Tian K, Wu Y, Yuan L, Liu H (2025) Design and deformation mechanisms of multi-phase multi-scale eutectic medium entropy alloys Cr$$1.5$$FeNi$$1.5$$Nb$$_X$$. Mater Sci Eng A 14899810.1016/j.msea.2025.148998 ↗
13. Lu Y, Gao X, Jiang L, Chen Z, Wang T, Jie J, Kang H, Zhang Y, Guo S, Ruan H et al (2017) Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range. Acta Mater 124:143–15010.1016/j.actamat.2016.11.016 ↗
14. Chen J-X, Li T, Chen Y, Cao F-H, Wang H-Y, Dai L-H (2023) Ultra-strong heavy-drawn eutectic high entropy alloy wire. Acta Mater 243:11851510.1016/j.actamat.2022.118515 ↗
15. Hansen N (2004) Hall-petch relation and boundary strengthening. Scr Mater 51(8):801–80610.1016/j.scriptamat.2004.06.002 ↗
16. Sansoz F, Ke X (2022) Hall-petch strengthening limit through partially active segregation in nanocrystalline Ag-Cu alloys. Acta Mater 225:11756010.1016/j.actamat.2021.117560 ↗
17. Carlton CE, Ferreira PJ (2007) What is behind the inverse hall-petch effect in nanocrystalline materials? Acta Mater 55(11):3749–375610.1016/j.actamat.2007.02.021 ↗
18. Padmanabhan KA, Dinda GP, Hahn H, Gleiter H (2007) Inverse hall-petch effect and grain boundary sliding controlled flow in nanocrystalline materials. Mater Sci Eng A 452:462–46810.1016/j.msea.2006.10.084 ↗
19. Chen Y, An X, Zhang S, Fang F, Huo W, Munroe P, Xie Z (2021) Mechanical size effect of eutectic high entropy alloy: effect of lamellar orientation. J Mater Sci Technol 82:10–2010.1016/j.jmst.2020.11.067 ↗
20. Ding ZY, He QF, Wang Q, Yang Y (2018) Superb strength and high plasticity in laves phase rich eutectic medium-entropy-alloy nanocomposites. Int J Plast 106:57–7210.1016/j.ijplas.2018.03.001 ↗
21. Edwards TEJ, Xie T, Ventura NMD, Casari D, Guerra C, Huszár E, Maeder X, Schwiedrzik JJ, Ivo Utke L, Pethö MJ (2022) On the thinnest Al$$_2$$O$$_3$$ interlayers in Al-based nanolaminates to enhance strength, and the role of constraint. Acta Mater 240:11833110.1016/j.actamat.2022.118345 ↗
22. Wu H, Xie J, Yang H, Yang Y, Hou G, Li J, Zhou Y, Sun X et al (2023) Corrosion behaviors and passive film properties of a newly developed cost-effective AlCrFeNi eutectic high entropy alloy in different corrosive solutions. Mater Today Commun 37:10760210.1016/j.mtcomm.2023.107602 ↗
23. Wang M, Wen Z, Liu J, Ma B, Wang M, Zou Z, Zhao Y (2022) Labyrinthine structure Al$$_x$$CrFeNi ($$x \ge$$ 1) eutectic high entropy alloys with duplex reinforced phases. J Alloy Compd 918:16544110.1016/j.jallcom.2022.165441 ↗
24. Farkas D, Caro A (2020) Model interatomic potentials for Fe-Ni-Cr-Co-Al high-entropy alloys. J Mater Res 35(22):3031–304010.1557/jmr.2020.294 ↗
25. Nguyen V-L, Doan M-Q, Dang HT, Hue DTH, Bui TQ, Kim K, Dinh V-H, Lich LV (2024) Enhanced energy absorption in high entropy alloys with octet lattice nanostructures. Int J Solids Struct 303:11301310.1016/j.ijsolstr.2024.113013 ↗
26. Nguyen V-L, Doan M-Q, Hue DTH, Dinh V-H, Lich LV (2024) Mechanical behavior of high entropy alloys with gyroid nanostructures. Intermetallics 171:10834810.1016/j.intermet.2024.108348 ↗
27. Makan M, Makan A, El Ghoulbzouri A (2025) Effect of graphene network reinforcement and interface orientation on the mechanical behavior of nickel composites: a molecular dynamics study. Acta Mater 284:12063710.1016/j.actamat.2024.120637 ↗
28. Doan M-Q, Nguyen P-T, Pham V-H, Nguyen V-L, Nguyen D-K, Van Lich L (2026) Design-governed scaling laws and deformation transitions in anisotropic iwp-based cellular nanomaterials. Res Eng 11055910.1016/j.rineng.2026.110559 ↗
29. Stukowski A (2010) Visualization and analysis of atomistic simulation data with ovito-the open visualization tool. Modell Simul Mater Sci Eng 18(1):01501210.1088/0965-0393/18/1/015012 ↗
30. Faken D, Jónsson H (1994) Systematic analysis of local atomic structure combined with 3d computer graphics. Comput Mater Sci 2(2):279–28610.1016/0927-0256(94)90109-0 ↗
31. Stukowski A, Bulatov VV, Arsenlis A (2012) Automated identification and indexing of dislocations in crystal interfaces. Modell Simul Mater Sci Eng 20(8):08500710.1088/0965-0393/20/8/085007 ↗
32. Zhang Y, Zuo TT, Tang Z, Gao MC, Dahmen KA, Liaw PK, Lu ZP (2014) Microstructures and properties of high-entropy alloys. Prog Mater Sci 61:1–9310.1016/j.pmatsci.2013.10.001 ↗
33. Wen Z, Zhao Y, Tian J, Wang S, Guo Q, Hou H (2019) Computation of stability, elasticity and thermodynamics in equiatomic AlCrFeNi medium-entropy alloys. J Mater Sci 54(3):2566–2576. https://doi.org/10.1007/s10853-018-2943-710.1007/s10853-018-2943-7 ↗
34. Ju S-P, Huang P-X, Chen H-L, Chen H-T, Chen H-Y, Wu D-Y (2024) Tailoring strength and ductility in dual-phase high-entropy alloys: insights from deep learning molecular dynamics simulation on FCC/BCC thickness ratios. J Market Res 33:6810–6819
35. Nguyen D-K, Fang T-H, Huang C-C (2025) Influence of phase morphology on mechanical properties of dual-phase eutectic high-entropy alloys. J Alloy Compd 1024:17982310.1016/j.jallcom.2025.179823 ↗
36. Wu XL, Zhu YT, Wei YG, Wei Q (2009) Strong strain hardening in nanocrystalline nickel. Phys Rev Lett 103(20):20550410.1103/PhysRevLett.103.205504 ↗
37. Chen M, Ma E, Hemker KJ, Sheng H, Wang Y, Cheng X (2003) Deformation twinning in nanocrystalline aluminum. Science 300(5623):1275–127710.1126/science.1083727 ↗
38. Zhang YF, Xue S, Li Q, Li J, Ding J, Niu TJ, Su R, Wang H, Zhang X (2019) Size dependent strengthening in high strength nanotwinned Al/Ti multilayers. Acta Mater 175:466–47610.1016/j.actamat.2019.06.028 ↗
39. Huang S, Li W, Lu S, Tian F, Shen J, Holmström E, Vitos L (2015) Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy. Scr Mater 108:44–4710.1016/j.scriptamat.2015.05.041 ↗
40. Zaddach AJ, Niu C, Koch CC, Irving DL (2013) Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy. JOM 65(12):1780–178910.1007/s11837-013-0771-4 ↗
41. Li X, Wei Y, Lu L, Lu K, Gao H (2010) Dislocation nucleation governed softening and maximum strength in nano-twinned metals. Nature 464(7290):877–88010.1038/nature08929 ↗
42. Li H, Wang J, Deng N, Wang WY, Yuan R, Li J (2022) Eutectoid lamellar structure strengthened ultra-strong Al$$13$$Fe$$29$$Co$$29$$Ni$$29$$ high-entropy alloy. Mater Sci Eng A 856:14393410.1016/j.msea.2022.143934 ↗