Low-temperature hot compression behavior of Nb-, W-, and Fe-containing TiAl alloys at 750–850 °C

1. Qin G, Yang X, Feng L, Wang Q, Wang L, Su YQ, Chen RR (2026) Hetero-lamellar design alleviates the Ubiquitous strength-ductility trade-off in high-entropy alloys. Intermetallics 194:107270. https://doi.org/10.1016/j.intermet.2026.10931610.1016/j.intermet.2026.109316 ↗

2. Yang X, Qin G, Feng L, Wang Q, Wang L, Su YQ, Chen RR (2026) Synergistic Strengthening via Reduced Phase Property Mismatch in a Dual-Phase High-Entropy Alloy Enabled by Bidirectional Precipitation Engineering. Journal of Alloys and Compounds 1071:188785. https://doi.org/10.1016/j.jallcom.2026.18878510.1016/j.jallcom.2026.188785 ↗

3. Qu DF, Du XD, Wang F, Wu TY, Wang Z, Zhou L (2025) Breaking strength-ductility trade-off in magnesium alloy by semi-solid extrusion process: Multi-slip activation in “Bimodal Grain.” Journal of Magnesium and Alloys 13:100902. https://doi.org/10.1016/j.jma.2025.09.01410.1016/j.jma.2025.09.014 ↗

4. Shen JY, Hu LX, Zhang LY, Liu WC, Fang AW, Sun Y (2020) Synthesis of TiAl/Nb composites with concurrently enhanced strength and plasticity by powder metallurgy. Mater Sci Eng A 795:139997. https://doi.org/10.1016/j.msea.2020.13999710.1016/j.msea.2020.139997 ↗

5. Xu RR, Li MQ, Zhao YH (2023) A review of microstructure control and mechanical performance optimization of γ-TiAl alloys. J Alloys Compd 932:167611. https://doi.org/10.1016/j.jallcom.2022.16761110.1016/j.jallcom.2022.167611 ↗

6. Chang YY, Dong SL, Liu SB, Qu YD, Chen RR, Li GL, Liu SB (2026) Microstructure evolution of high Nb-TiAl alloys with different Al contents under low temperature with stress. J Mater Eng Perform 35:25086–25091. https://doi.org/10.1007/s11665-026-13444-710.1007/s11665-026-13444-7 ↗

7. Sun YY, Chen F, Qian SW, Wang N, Ding J, Chang H, Chen XL, Zhou L (2025) Microstructure evolution mechanism of Fe microalloying high Nb-TiAl alloy fabricated by HIP. J Mater Res Technol 36:1273–1282. https://doi.org/10.1016/j.jmrt.2025.03.17010.1016/j.jmrt.2025.03.170 ↗

8. Dong SL, Qu YD, Chen RR, Li GL, Zhang W, Wang Q, Fang HZ, Guo JJ, Yu B (2023) Proper (Nb,Fe) co-alloyed TiAl-based alloy with good hot deformation processing capability. Intermetallics 153:107780. https://doi.org/10.1016/j.intermet.2022.10778010.1016/j.intermet.2022.107780 ↗

9. Du XD, Zu ZY, Wang F, Bai SG, Zhou L, Kang XQ, Wang Z, Li JW (2025) B2 phase precipitation behavior in Ti-40Al-8Nb alloys during the hot deformation process. Journal of Magnesium and Alloys 13:1757–1770, 107677. https://doi.org/10.1016/j.jma.2024.05.01010.1016/j.jma.2024.05.010 ↗

10. Zhou HT, Kong FT, Wang XP, Chen YY (2017) Hot deformation behavior and microstructural evolution of as-forged Ti-44Al-8Nb-(W, B, Y) alloy with nearly lamellar microstructure. Intermetallics 81:62–72. https://doi.org/10.1016/j.intermet.2017.02.02610.1016/j.intermet.2017.02.026 ↗

11. Xu RR, Li H, Li MQ (2020) Flow softening mechanism in isothermal compression of β-solidifying γ- TiAl alloy. Mater Des 186:108328. https://doi.org/10.1016/j.matdes.2019.10832810.1016/j.matdes.2019.108328 ↗

12. Jiang HT, Tian SW, Guo WQ, Zhang GH, Zeng SW (2018) Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression. Mater Sci Eng A 719:104–111. https://doi.org/10.1016/j.msea.2018.01.13310.1016/j.msea.2018.01.133 ↗

13. Sun Y, Wan ZP, Hu LX, Ren JS (2015) Characterization of hot processing parameters of powder metallurgy TiAl-based alloy based on the activation energy map and processing map. Mater Des 86:922–932. https://doi.org/10.1016/j.matdes.2015.07.14010.1016/j.matdes.2015.07.140 ↗

14. Lin XJ, Huang HJ, Yuan XG, Zheng BW, Zuo XJ, Zhou G, Du K (2025) Optimization and verification of hot tensile deformation parameters of Ti-47.5Al-2.5V-1.0Cr-0.2Zr alloy based on processing map theory. Intermetallics 180:108692. https://doi.org/10.1016/j.intermet.2025.10869210.1016/j.intermet.2025.108692 ↗

15. Dong SL, Gao JC, Liu SB, Qu YD, Chen RR, Li GL, Guo JJ (2024) High-temperature tensile rupture property of (Nb,W) co-alloying TiAl-based alloys. Mater Charact 217:114373. https://doi.org/10.1016/j.matchar.2024.11437310.1016/j.matchar.2024.114373 ↗

16. Dong SL, Zhou JR, Gao JC, Liu SB, Qu YD, Chen RR, Li GL, Zhang W (2026) Enhanced tensile rupture property of as-cast Ti-44Al-4Nb-1W-0.1B alloy after hot isostatic pressure and annealing. J Mater Eng Perform 35:18108–18114. https://doi.org/10.1007/s11665-025-12874-z10.1007/s11665-025-12874-z ↗

17. Zhang JS, Liu HJ, Zheng J, Ji JS, Shi YS, Jia LC, Yan ZM, Dong BB, Xue Y (2021) Microstructure characterization of hot isostatic pressed Ti-6Al-4V alloy under uniaxial compression and post heat treatment. J Mater Res Technol 15:7070–7084. https://doi.org/10.1016/j.jmrt.2021.11.13210.1016/j.jmrt.2021.11.132 ↗

18. Liang ZQ, Xiao SL, Chi DZ, Zheng YF, Xu LJ, Xue X, Tian J, Chen YY (2023) Compressive creep behavior of high Nb containing TiAl alloy: dynamic recrystallization and phase transformation. Intermetallics 163:108067. https://doi.org/10.1016/j.intermet.2023.10806710.1016/j.intermet.2023.108067 ↗

19. Du XD, Zhou L, Wang F, Chen YQ, Wang Z, Xu ZY (2026) Effects of Mg/Si Ratio on Hot Tearing Susceptibility of Al-xMg-(3-x)Si Alloys. International Journal of Metalcasting 20:1025–1039. https://doi.org/10.1007/s40962-025-01637-010.1007/s40962-025-01637-0 ↗

20. Zhao JJ, Shen J, Zheng SK, Li JX, Wang W, Gao XY (2024) Microstructure evolution and its effect on high-temperature compressive properties of directionally solidified Ti-44.5Al-3Nb-0.6Si-0.2C alloy by electromagnetic confinement after heat treatment. Intermetallics 175:108491. https://doi.org/10.1016/j.intermet.2024.10849110.1016/j.intermet.2024.108491 ↗

21. Cao GX, Fu LF, Lin JG, Zhang YG, Chen CQ (2000) The relationships of microstructure and properties of a fully lamellar TiAl alloy. Intermetallics 8:647–653. https://doi.org/10.1016/S0966-9795(99)00128-410.1016/S0966-9795(99)00128-4 ↗

22. Chen Y, Qin G, Chen L, Wang Q, Wang L, Su YQ, Chen RR (2026) Suppression of Dynamic Recovery via Localized Solute Pinning for Superior High Temperature Strength in a Lightweight Refractory Medium-Entropy Alloy. Acta Mater. 316. https://doi.org/10.1016/j.actamat.2026.1224510.1016/j.actamat.2026.12245 ↗

23. Tang B, Wang WY, Xiang L, Liu Y, Zhu L, Ji SL, He J, Li JS (2020) Metadynamic recrystallization behavior of β-solidified TiAl alloy during post-annealing after hot deformation. Intermetallics 117:106679. https://doi.org/10.1016/j.intermet.2019.10667910.1016/j.intermet.2019.106679 ↗

24. Wang YP, Rong GF, Ma TF, Chen ZX, Zhang XF, Zhu DD, Fang HZ, Chen RR (2024) In-situ synthesized a dual-scale Ti2AlC reinforced TiAl composites with superior mechanical properties. J Mater Res Technol 28:1667–1668. https://doi.org/10.1016/j.jmrt.2023.12.09210.1016/j.jmrt.2023.12.092 ↗

25. Li KX, Fang HZ, Chen RR, Liang JS, Ding XF, Zou YC, Guo JJ (2024) Synergistic effect of twin consumption within lamellae and slip system activation at grain boundary on the formation of nano-spherical B2 phase. Scripta Mater 249:116154. https://doi.org/10.1016/j.scriptamat.2024.11615410.1016/j.scriptamat.2024.116154 ↗

26. Gong Z, Dong SL, Chen ZY, Liu SB, Qu YD, Chen RR, Li GL, Zhang W (2026) Effect of cooling rate of solution treatment on high-temperature creep properties of Ti60 alloy rolled plate. Met Mater Int. https://doi.org/10.1007/s12540-025-02163-810.1007/s12540-025-02163-8 ↗

27. Wang YL, Zhang ZD, Chang YY, Zhang MX, Qu YD, Dong SL (2026) The α2→γ transformation in Ti-44Al-8Nb-0.1B alloy under lower temperature and lower triaxial compressive stress. Vacuum 251:115359. https://doi.org/10.1016/j.vacuum.2026.11535910.1016/j.vacuum.2026.115359 ↗

28. Chang YY, Dong SL, Liu SB, Qu YD, Chen RR, Li GL, Zhang W, Zhang SR (2026) Different precipitation mechanism of B2 phase under three-way stress heat treatment. Mater Charact 236:116395. https://doi.org/10.1016/j.matchar.2026.11639510.1016/j.matchar.2026.116395 ↗

29. Chen YY, Yang F, Kong FT, Xiao SL (2010) Microstructure, mechanical properties, hot deformation and oxidation behavior of Ti-45Al-5.4V-3.6Nb-0.3Y alloy. J Alloys Compd 498:95–101. https://doi.org/10.1016/j.jallcom.2010.03.11810.1016/j.jallcom.2010.03.118 ↗

30. Tian SW, Jiang HT, Guo WQ, Zhang GH, Zeng SW (2019) Hot deformation and dynamic recrystallization behavior of TiAl-based alloy. Mater Charact 112:106521. https://doi.org/10.1016/j.jallcom.2010.03.11810.1016/j.jallcom.2010.03.118 ↗

31. Wang JM, Zhou YH, Zhu TY, Wu YL, Peng C, Zeng XQ, Shen Z, Zhang LF, Chen K (2026) Sequential δ/γ interfacial degradation induces a sigmoidal kinetic transition in stress corrosion cracking during superlong-term thermal aging of duplex stainless steel. Acta Mater 313:122314. https://doi.org/10.1016/j.actamat.2026.12231410.1016/j.actamat.2026.122314 ↗

32. Wang XY, Zhao YH, Cui YG, Lu JQ, Zhang K, Dong ZY, Wu YH, Gao SX, Zhang K, Wang DW, Song ZX, Chen K, Shen Z, Zeng XQ (2026) Evolution of fatigue-induced cracks in Cr-coated Zr alloy cladding in high-temperature steam environment. Corros Sci 263:113722. https://doi.org/10.1016/j.corsci.2026.11372210.1016/j.corsci.2026.113722 ↗

33. Zhang K, Zhao YH, Li JQ, Wu YH, Ma S, Shen Z, Wang H, Zeng XQ (2026) High-temperature steam corrosion performance of FeCrAl alloys after long-term service in PWR condition: a reliable evaluation and multiscale microstructural characterization. Corros Sci 264:113747. https://doi.org/10.1016/j.corsci.2026.11374710.1016/j.corsci.2026.113747 ↗

34. Dong ZY, Zhao YH, Li JQ, Wu YH, Zhang K, Shen YF, Ma S, Li YX, Chen K, Gao SX, Zhang K, Zeng XQ, Shen Z (2026) Grain boundary–mediated Zr diffusion and Cr2O3 reduction governing steam oxidation degradation in Cr-coated Zr alloy. Corros Sci 265:113788. https://doi.org/10.1016/j.corsci.2026.11378810.1016/j.corsci.2026.113788 ↗

35. Yang WH, Zou JC, Li S, Gao DX, Zhao XL, Chen YR, Yuan ST, Kang JD, Hua BL, Shen Z, Zhong WH (2026) Microstructure-dependent volatilization of Haynes 230 alloy in ultrahigh vacuum at high temperatures. Corros Sci 265:11382110.1016/j.corsci.2026.113821 ↗