Effects of aspect ratio and waviness angle on the compressive properties and damage tolerance of 3D-printed nacre-inspired continuous carbon fiber composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Çağlar S, Temiz C (2025) Al–5Cu–0.3Sc–B4C nanocomposites: microstructural refinement, strengthening mechanisms, and corrosion behavior. Nanomaterials (Basel) 15(23):183610.3390/nano15231836 ↗
2. Çağlar S (2025) Corrosion behavior, microstructure, and mechanical properties of Al–10Sm2O3-B neutron shielding composites. Nucl Mater Energy 45:10200610.1016/j.nme.2025.102006 ↗
3. Zhang Y, Zheng W, Wang Y et al (2025) A review of 3D printing continuous carbon fiber reinforced thermoplastic polymers: materials, processes, performance enhancement, and failure analysis. Polym Compos 46(14):12619–1264910.1002/pc.29895 ↗
4. Zhang W, Xu J (2022) Advanced lightweight materials for automobiles: a review. Mater Des 221:11099410.1016/j.matdes.2022.110994 ↗
5. Wang H, Huo S, Chevali V et al (2025) Carbon fiber reinforced thermoplastics: from materials to manufacturing and applications. Adv Mater 37(27):241870910.1002/adma.202418709 ↗
6. Wisnom M, Pimenta S, Shaffer M et al (2024) High performance ductile and pseudo-ductile polymer matrix composites: a review. Compos Part A Appl Sci Manuf 181:10802910.1016/j.compositesa.2024.108029 ↗
7. Tan Y, Wang Y, Zhang P et al (2025) Bioinspired hierarchical hydrogels engineered with extreme impact resistance. Adv Funct Mater 35(51):0803410.1002/adfm.202508034 ↗
8. Du G, Deng X, Qian Y (2025) Biomimetic 3D printed herringbone-bouligand cementitious composites for ultra-high impact performance. Compos Part B Eng 308:11299310.1016/j.compositesb.2025.112993 ↗
9. Xu S, Huang H, Fu Q et al (2025) Design, study and optimization of crashworthiness and energy absorption of symmetric and asymmetric offset hexagonal honeycombs. Thin-Walled Struct 215:11355610.1016/j.tws.2025.113556 ↗
10. Liu J, Liu J, Gao K et al (2025) A bioinspired gradient curved auxetic honeycombs with enhanced energy absorption. Int J Mech Sci 291:11018910.1016/j.ijmecsci.2025.110189 ↗
11. Zhang Z, Zhang L, Song B et al (2022) Bamboo-inspired, simulation-guided design and 3D printing of light-weight and high-strength mechanical metamaterials. Appl Mater Today 26:10126810.1016/j.apmt.2021.101268 ↗
12. Rousseau M, Lopez E, Stempflé P et al (2005) Multiscale structure of sheet nacre. Biomaterials 26(31):6254–626210.1016/j.biomaterials.2005.03.028 ↗
13. Ritchie RO (2011) The conflicts between strength and toughness. Nat Mater 10(11):817–82210.1038/nmat3115 ↗
14. Li YL, Guo RF, Hu ZJ et al (2021) Construction of nacre-mimetic composites with a “brick-and-mortar” architecture based on structural defects in ice-templating. Mater Des 204:10966810.1016/j.matdes.2021.109668 ↗
15. Sun J, Bhushan B (2012) Hierarchical structure and mechanical properties of nacre: a review. RSC Adv 2(20):7617–763210.1039/c2ra20218b ↗
16. Zhao H, Yang Z, Guo L (2018) Nacre-inspired composites with different macroscopic dimensions: strategies for improved mechanical performance and applications. NPG Asia Mater 10(4):1–2210.1038/s41427-018-0009-6 ↗
17. Rodriguez-Garcia V, Herraez M, Martinez V et al (2022) Interlaminar and translaminar fracture toughness of automated manufactured bio-inspired CFRP laminates. Compos Sci Technol 219:10923610.1016/j.compscitech.2021.109236 ↗
18. Espinosa H, Rim J, Barthelat FCC (2009) Merger of structure and material in nacre and bone–perspectives on de novo biomimetic materials. Prog Mater Sci 54:1059–110010.1016/j.pmatsci.2009.05.001 ↗
19. Huang W, Restrepo D, Jung JY et al (2019) Multiscale toughening mechanisms in biological materials and bioinspired designs. Adv Mater 31(43):190156110.1002/adma.201901561 ↗
20. Magrini T, Senol A, Style R et al (2022) Fracture of hierarchical multi-layered bioinspired composites. J Mech Phys Solids 159:10475010.1016/j.jmps.2021.104750 ↗
21. Mirzaeifar R, Dimas LS, Qin Z et al (2015) Defect-tolerant bioinspired hierarchical composites: simulation and experiment. ACS Biomater Sci Eng 1:295–30410.1021/ab500120f ↗
22. Meng Y, Zhu Y, Zhou L et al (2022) Artificial nacre with high toughness amplification factor: residual stress-engineering sparks enhanced extrinsic toughening mechanisms. Adv Mater 34(9):210826710.1002/adma.202108267 ↗
23. Yin Z, Hannard F, Barthelat F (2019) Impact-resistant nacre-like transparent materials. Science 364(6447):1260–126310.1126/science.aaw8988 ↗
24. Malkin R, Yasaee M, Trask RS et al (2013) Bio-inspired laminate design exhibiting pseudo-ductile (graceful) failure during flexural loading. Compos Part A Appl Sci Manuf 54:107–11610.1016/j.compositesa.2013.07.008 ↗
25. Narducci F, Lee KY, Pinho ST (2018) Realising damage-tolerant nacre-inspired CFRP. J Mech Phys Solids 116:391–40210.1016/j.jmps.2018.04.004 ↗
26. Narducci F, Pinho ST (2017) Exploiting nacre-inspired crack deflection mechanisms in CFRP via micro-structural design. Compos Sci Technol 153:178–18910.1016/j.compscitech.2017.08.023 ↗
27. Zhang Z, Long Y, Yang Z et al (2022) An investigation into printing pressure of 3D printed continuous carbon fiber reinforced composites. Compos Part A Appl Sci Manuf 162:10716210.1016/j.compositesa.2022.107162 ↗
28. Li L, Liu W, Sun L (2022) Mechanical characterization of 3D printed continuous carbon fiber reinforced thermoplastic composites. Compos Sci Technol 227:10961810.1016/j.compscitech.2022.109618 ↗
29. Han B, Wang Y, Liu C et al (2025) 3D printed continuous carbon fiber reinforced TPU metamaterials for flexible multifunctional sensors. Chem Eng J 513:16276710.1016/j.cej.2025.162767 ↗
30. Um H, Lee J, Shin J et al (2022) 3D printed continuous carbon fiber reinforced thermoplastic composite sandwich structure with corrugated core for high stiffness/load capability. Compos Struct 291:11559010.1016/j.compstruct.2022.115590 ↗
31. Zhu C, Gemeda HB, Duoss EB et al (2024) Toward multiscale, multimaterial 3D printing. Adv Mater 36(34):231420410.1002/adma.202314204 ↗
32. Bandyopadhyay A, Traxel KD, Bose S (2021) Nature-inspired materials and structures using 3D printing. Mater Sci Eng R Rep 145:10060910.1016/j.mser.2021.100609 ↗
33. Ko K, Lee S, Hwang Y et al (2022) Investigation on the impact resistance of 3D printed nacre-like composites. Thin-Walled Struct 177:10939210.1016/j.tws.2022.109392 ↗
34. Tran P, Ngo T, Ghazlan A et al (2017) Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings. Compos Part B Eng 108:210–22310.1016/j.compositesb.2016.09.083 ↗
35. Vazquez-Alvarez RA, Carrillo JG, Flores-Johnson EA et al (2025) Influence of the geometry and printing materials on the impact behavior of nacre-like composites produced by additive manufacturing. Thin-Walled Struct. 217:11388110.1016/j.tws.2025.113881 ↗
36. Gu G, Libonati F, Wettermark S et al (2017) Printing nature: unraveling the role of nacre’s mineral bridges. J Mech Behav Biomed Mater 76:135–14410.1016/j.jmbbm.2017.05.007 ↗
37. Peng XL, Bargmann S (2024) Nacre-inspired auxetic interlocking brick-and-mortar composites. Compos Commun 48:10189210.1016/j.coco.2024.101892 ↗
38. Liu F, Li T, Jia Z et al (2020) Combination of stiffness, strength, and toughness in 3D printed interlocking nacre-like composites. Extreme Mech Lett 35:10062110.1016/j.eml.2019.100621 ↗
39. Chen K, Yang F, Yao C et al (2023) Single material FDM printed nacre-like composite structure with high fracture resistance: utilizing interface as compliant phase. Compos Commun 42:10168210.1016/j.coco.2023.101682 ↗
40. Peng W, Ge Z, Shao Y et al (2024) Mechanical behavior of nacre-inspired CFRP composites by 3D printing. Compos Struct 339:11816710.1016/j.compstruct.2024.118167 ↗
41. Song J, Fan C, Ma H et al (2018) Crack deflection occurs by constrained microcracking in nacre. Acta Mech Sin 34(1):143–15010.1007/s10409-017-0724-1 ↗
42. Checa AG, Cartwright JHE, Willinger M-G (2011) Mineral bridges in nacre. J Struct Biol 176(3):330–33910.1016/j.jsb.2011.09.011 ↗
43. Wu J, Yuan H, Li L (2019) Effect of viscoelasticity on interfacial stress transfer mechanism in the biocomposites: a theoretical study of viscoelastic shear lag model. Compos Part B Eng 164:297–30810.1016/j.compositesb.2018.11.086 ↗
44. Ji HM, Liang SM, Li XW et al (2020) Kinking and cracking behavior in nacre under stepwise compressive loading. Mater Sci Eng C Mater Biol Appl 108:11036410.1016/j.msec.2019.110364 ↗
45. Gao K, Tan G, Liu Y et al (2024) Compression fatigue properties of bioinspired nacre-like composites compared with natural nacre: effects of architectures and orientations. Int J Fatigue 179:10806210.1016/j.ijfatigue.2023.108062 ↗
46. Liu Y, Zhao C, Xu C et al (2025) Shape recovery effect and energy absorption of reusable honeycomb structures. Compos Struct 352:11870810.1016/j.compstruct.2024.118708 ↗
47. Rahmatabadi D, Aberoumand M, Soltanmohammadi K et al (2023) 4D printing-encapsulated polycaprolactone-thermoplastic polyurethane with high shape memory performances. Adv Eng Mater 25(6):220130910.1002/adem.202201309 ↗
48. Zhang P, Arceneaux DJ, Khattab A (2018) Mechanical properties of 3D printed polycaprolactone honeycomb structure. J Appl Polym Sci 135(12):4601810.1002/app.46018 ↗
49. Yousuf MH, Abuzaid W, Alkhader M (2020) 4D printed auxetic structures with tunable mechanical properties. Addit Manuf 35:101364