Balancing strength, toughness, and corrosion resistance in A286 superalloy through a failure-guided aging study
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. High-temperature steam corrosion performance of FeCrAl alloys after long-term service in PWR condition: a reliable evaluation and multiscale microstructural characterization
2. Grain boundary–mediated Zr diffusion and Cr2O3 reduction governing steam oxidation degradation in Cr-coated Zr alloy10.1016/j.corsci.2026.113788 ↗
3. Microstructure-dependent volatilization of haynes 230 alloy in ultrahigh vacuum at high temperatures10.1016/j.corsci.2026.113821 ↗
4. Precipitate evolution and mechanical properties of Si-modified A286 alloy aged at 510° C10.1016/j.msea.2024.146478 ↗
5. Development of highly hard and corrosion resistant A286 stainless steel through plasma nitrocarburizing process10.1016/j.surfcoat.2015.09.017 ↗
6. The mechanism of η phase precipitation in A286 superalloy during heat treatment10.1007/s11665-013-0592-1 ↗
7. Study on gamma prime and carbides of alloy A286 by traditional thermodynamic calculation10.1515/htmp-2016-0179 ↗
8. Review of weldability of precipitation hardening Ni-and fe-ni-based superalloys
9. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
10. Donachie · 2002
11. Reed · 2008
12. Sequential δ/γ interfacial degradation induces a sigmoidal kinetic transition in stress corrosion cracking during superlong-term thermal aging of duplex stainless steel10.1016/j.actamat.2026.122314 ↗
13. Evolution of fatigue-induced cracks in Cr-coated Zr alloy cladding in high-temperature steam environment
14. Fatigue-induced precipitates at grain boundary of Nb-A286 alloy in high temperature low cycle fatigue10.1016/S0921-5093(00)00975-8 ↗
15. Influence of η-(Ni3Ti) and TiC phases on corrosion resistance and mechanical properties of A286 austenitic superalloy after heat treatment10.1016/j.ijoes.2023.100208 ↗
16. Influence of ageing heat treatment on alloy A-286 microstructure and stress corrosion cracking behavior in PWR primary water10.1016/j.jnucmat.2006.10.003 ↗
17. Influence of aging treatment on precipitation behavior of η phase in Ni-Co-Cr alloy10.1016/S1006-706X(10)60047-7 ↗
18. Pitting, lacy covers, and pit merger in stainless steel: 3D peridynamic models10.1016/j.corsci.2019.01.006 ↗
19. Potentiodynamic study of the influence of gamma prime and eta phases on pitting corrosion of A286 superalloy10.1016/j.jallcom.2016.02.261 ↗
20. Laser treatment of A286 superalloy: corrosion resistance of the treated surface10.1002/sia.5041 ↗
21. The effect of second phase particles on the corrosion resistance of A286 alloys
22. Bradley · 2009
23. A286 applications in turbo machineries—experiences in fabrication, In-Service evaluation, and failure analysis10.31399/asm.cp.am-epri-2019p0750 ↗
24. Insights into the complexities of diffusion-induced grain boundary migration in Fe-Cr-Ni ternary alloys
25. On the morphology of grain boundary discontinuous reactions and phase identification in an advanced Cr–Fe–Ni alloy10.1007/s10853-020-04690-8 ↗
26. Golden · 2012
27. Metallurgical evaluation and failure analysis of turbo expander Tie-bolt10.1016/j.engfailanal.2023.107392 ↗
28. The effect of long-term ageing at 475° C on microstructure and properties of a precipitation hardening martensiticstainless steel10.3390/met12101643 ↗
29. Effect of aging time on crack initiation mechanism of precipitation hardening stainless steel in very high cycle fatigue regime10.1016/j.ijfatigue.2023.107522 ↗
30. The effect of hold time and waveform on the high-temperature, low-cycle fatigue properties of a Nb-A286 alloy10.1007/s11661-001-0043-8 ↗
31. Microstructure and properties after deformation and aging process of A286 superalloy10.1007/s12598-018-1171-2 ↗
32. Atmosphere-dependent hydrogenation of TiO2 nanotubes synthesized via one-and two-step anodization for enhanced photoelectrochemical performance10.1016/j.apsusc.2026.166725 ↗
33. Metallography and microstructures of heat-resistant alloys
34. Analysis of the precipitation and growth processes of the intermetallic phases in an Fe-Ni superalloy
35. Microstructural development and creep behavior in A286 superalloy10.1016/j.matchar.2004.03.007 ↗
36. Homogeneity study of TiC and η phases via electromagnetic stirring in arc-melted heat-resistant A286 superalloys varied with carbon and titanium contents
37. Study of influence of gamma prime and eta phases on corrosion behavior of A286 superalloy by using electrochemical potentiokinetic techniques10.1016/j.matdes.2015.08.041 ↗
38. Effect of boron on the microstructure, mechanical properties and hydrogen performance in a modified A28610.1016/j.msea.2010.05.070 ↗
39. Influence of γ′ precipitate on impact toughness and tensile properties of a new Fe–Ni-based superalloy10.1016/j.intermet.2024.108205 ↗
40. Effect of long-term aging on microstructural stability and tensile deformation of a Fe–Ni-based superalloy10.1016/j.msea.2022.143298 ↗
41. Effect of carbon and titanium variations in Fe‐ased heat‐resistant superalloy A286 on TiC and η phase Formation10.1002/srin.202100390 ↗
42. Hydrogen-induced ductility loss of precipitation-strengthened Fe-Ni-Cr-based superalloy10.1016/j.msea.2018.10.040 ↗
43. Microstructural characterization, formation mechanism and fracture behavior of the needle δ phase in Fe–Ni–Cr type superalloys with high Nb content10.1016/j.matchar.2015.09.011 ↗
44. Harnessing impact-induced cracking via stiffness heterogeneity10.1016/j.compscitech.2022.109440 ↗
45. Characteristics of crack growth in brittle solids with the effects of material heterogeneity and multi-crack interaction: L. Wang et al10.1007/s10704-024-00771-w ↗
46. Stability, reactivity and breakdown of passive films. Problems of recent and future research10.1016/S0013-4686(00)00347-9 ↗
47. Thermal oxidation of Ti-6Al-4V ELI with an ultrafine-grained surface at 500° C: oxidation kinetics, oxide characterization and corrosion performance10.1016/j.surfcoat.2023.129794 ↗
48. Effect of micro-shot peening on microstructure and fluoride-induced corrosion performance of AISI 904L superaustenitic stainless steel
49. Improved corrosion inhibition of 3-amino-1, 2, 4-triazole on mild steel electrode in HCl solution using surface nanocrystallization10.3139/146.111432 ↗
50. Corrosion protection of the reinforcing steels in chloride-laden concrete environment through epoxy/polyaniline–camphorsulfonate nanocomposite coating10.1016/j.corsci.2014.10.015 ↗